50 g Test Weight Button Stainless Steel Fine-Turned OIML Class M2 - KERN

Compact wooden case offers organised storage and straightforward handling for single 50 g calibration weights; its unpadded interior and lightweight build support efficient inspection and transport. Benefit from robust compatibility with common KERN single-weight series and order directly via Metav Werkzeuge or consult our specialists for fitting advice. KERN 337-060-200 wooden case for single 50 g calibration weights, unpadded KERN 337-060-200 is a compact wooden case designed to store and protect single 50 g calibration weights for workshop and laboratory use Wooden case for 50 g single weights Compatible with KERN 337, 347, 357, 367 Unpadded interior for compact storage Compact, lightweight design (0.11 kg) Secure, compact storage that preserves calibration integrity The wooden construction provides a stable environment for single weights, reducing the risk of surface damage during storage. The compact form keeps the instrument close to hand during routine checks, supporting faster workflows and fewer handling errors. By combining a lightweight case with deliberate interior spacing, this solution helps maintain the condition of delicate masses while enabling quick visual inspection before use. Designed for common KERN single-weight series to save time Compatibility with multiple KERN series ensures that a single case suits different kits used across the workshop or calibration bench, which cuts down on inventory complexity. The tailored fit for nominal 50 g items means fewer adjustments and less repacking during transfers between weighing stations. This practical alignment supports consistent handling procedures and contributes to reproducible measurement routines. Functional interior for efficient handling and inspection An unpadded interior offers practical benefits where padding could trap contamination or complicate cleaning. The smooth wooden cavity allows speedy removal and replacement of weights, and it simplifies visual checks for residues or wear. For users who prioritise straightforward maintenance and quick access over cushioned transport, this design reduces downtime and supports a tidy calibration workflow. A reliable supply chain and sensible choice for workshops Sourcing through Metav Werkzeuge places this accessory within a trusted distribution channel that emphasises availability and tested quality. The case is produced for practical everyday use, aligning with wider goals of affordable precision and dependable logistics from Emmerich. Choosing such accessories through an established partner supports continuity in calibration practices and clear stock management. Contact Metav Werkzeuge for a tailored supply recommendation or technical clarification on compatibility and shipping from our Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 337-060-200 Manufacturer: KERN GTIN: 4045761006393 Origin: DE Tariff code: 84239090 Data Product weight: 0.11 kg Intended nominal weight: 50 g ECLASS: 21100103 Special features Material: Wood Unpadded interior Suitable for single weights KERN 337, 347, 357, 367 Product group: Wooden case for single weights FAQ Is this case suitable for 50 g calibration weights? The KERN 337-060-200 wooden case is designed specifically for single 50 g calibration weights and provides a tailored fit for those nominal values. Which KERN weight series fit into this case? Compatibility includes the KERN 337, 347, 357 and 367 single-weight series, allowing one case to serve multiple commonly used kits. Does the interior provide cushioning for transport? The interior of the KERN 337-060-200 is intentionally unpadded to facilitate cleaning and quick inspection; it is intended for protected storage rather than heavy-duty transport. Can the case be used in a calibration laboratory and on the shop floor? Yes, the wooden case suits both laboratory benches and workshop storage where compact, organised holding of single weights is required. Where can technical details or compatibility questions be clarified? Technical clarifications regarding the KERN 337-060-200 and its fitment can be requested from Metav Werkzeuge; contact details are provided above in the product text. KERN · Germany · Contact details not provided

Take advantage of a durable plastic case that protects and organises individual calibration weights from 50–100 g, compatible with classes F1–M3; order directly via Metav Werkzeuge or consult the team for tailored advice. KERN 347-070-400 Plastic case for individual weights — 50–100 g, F1–M3 The KERN 347-070-400 plastic case is a compact storage solution designed to hold and protect individual calibration weights in button/compact form for routine checks and laboratory use. Compact case for 50–100 g weights Suitable for classes F1–M3 Durable plastic for safe storage Lightweight and easy to transport Organised protection for calibration work A robust storage solution helps maintain calibration integrity by preventing knocks, contamination and mix-ups. The KERN 347-070-400 plastic case is intended specifically for individual weights in the 50–100 g range and supports a tidy workshop workflow. By keeping weights together in a single place, handling time is reduced and the risk of accidental damage is minimised, which in turn helps preserve measurement accuracy across repeated use. Compatible with precision classes and routine checks The case is suitable for weights in classes F1–M3, covering high-precision reference weights through standard test weights used for routine verification. This compatibility means the storage solution aligns with common calibration procedures and instrument checks, supporting traceable handling and easier classification during audits. The emphasis on standard conformity contributes to efficient processes and reliable results. Lightweight, compact and easy to store Constructed from durable plastic, the case is designed for everyday workshop environments where space and weight matter. The lightweight construction (approx. 0.02 kg) and compact footprint simplify transport between workbenches or to off-site measuring points. Practical storage reduces downtime and streamlines the preparation of instruments for measurement or calibration sessions. Built for dependable workshop use Made from resilient material and tailored to button/compact weight geometries, this case supports organised storage without adding unnecessary complexity. The focus is on straightforward functionality: secure containment, clear identification of the intended nominal values, and a shape that fits common calibration workflows. For teams seeking a pragmatic storage solution, this product offers consistent protection with low maintenance. Contact Metav Werkzeuge in Emmerich for precise advice and to arrange supply of the KERN 347-070-400 plastic case that suits workshop and laboratory needs Technical data Article number: 347-070-400 SKU: 347-070-400 GTIN: 4045761008731 Manufacturer: KERN Product: Plastic case for individual weights Numbers / Core technical data Nominal weights: 50 g – 100 g Accuracy classes: F1 – M3 Weight: 0.02 kg ECLASS: 21100103 Tariff code: 84239090 Special features / Versions Material: Plastic Designed for: Individual weights (button/compact) Segment: Calibration weights / Cases and pouches Origin: Germany FAQ What nominal weights does the case accommodate? The case is designed to accommodate individual calibration weights in the 50–100 g range for button/compact forms. Which accuracy classes are compatible with this case? This storage solution is suitable for weights of classes F1–M3, covering both high-precision and routine verification applications. Is the material suitable for everyday workshop use? Yes, the case is made from durable plastic, which provides lightweight, practical protection for regular handling of weights. Can the case be used for other weight shapes or sizes? The case is intended for button/compact weight geometries within the specified 50–100 g nominal range; other shapes or sizes are not guaranteed to fit. Manufacturer: KERN, Germany

Take advantage of a lightweight aluminium shell with a padded interior and secure layout for 50 g single calibration weights in accuracy classes E1–M3; order directly via Metav Werkzeuge or consult our specialists for model advice and fast supply from Emmerich. KERN Aluminium-protected case 317-060-600 — padded protection for 50 g single weights (E1–M3) The Aluminium-protected case by KERN is designed to store and protect single calibration weights of 50 g, combining stable outer protection with a cushioned inner layout for laboratory and workshop environments. Aluminium shell with padded interior Designed for 50 g single calibration weights Compatible with weight classes E1–M3 Robust protection for button/compact weights Secure protection that preserves accuracy The lightweight aluminium construction provides rigid external protection while keeping the overall mass low for convenient handling. Internally, the padded interior cushions delicate single weights and reduces transmission of shocks and abrasion during transport. By protecting the geometry and surface condition of calibration pieces, the case helps maintain the stated tolerance of high-precision weights, ensuring the reliability of subsequent measurements. This results in fewer recalibrations and a more predictable calibration schedule, which supports production planning and quality control processes. Clear compatibility for metrology workflows Engineered for use with single weights in the 50 g nominal size and suitable for accuracy classes E1–M3, the case matches common calibration and verification routines in laboratories and service departments. The internal layout accommodates button/compact weight shapes used in routine checks and reference calibrations, simplifying storage and retrieval during measurement cycles. The selected specification reduces handling errors and speeds up set preparation, supporting efficient workflows in both calibration services and industrial metrology applications. Built for durability and practical use The product combines corrosion-resistant external material with a tailored interior to withstand frequent use and transport. The compact, padded etui keeps items organised and prevents contact-related damage between individual weights. The robust design supports long service life under workshop conditions and contributes to consistent measurement performance. Where traceability and preservation of nominal values matter, this protective case becomes a practical component of a comprehensive measurement system. Contact Metav Werkzeuge for specialist advice on the KERN aluminium-protected case 317-060-600 or to arrange supply directly from our Emmerich warehouse Technical Data Article number: 317-060-600 SKU: 317-060-600 Manufacturer: KERN GTIN: 4045761222670 Material: Aluminium For weights: 50 g For classes: E1–M3 Facts Weight: 0.18 kg Commodity code: 84239090 eCl@ss: 21100103 Origin country: CN Special features Padded interior Designed for single/button/compact weights Aluminium-protected shell Suitable for calibration and transport FAQ Is this case suitable for 50 g calibration weights? Yes. The KERN aluminium-protected case 317-060-600 is designed specifically for single 50 g calibration weights and their typical button/compact form. Which accuracy classes are supported by the case? The case is compatible with weights in accuracy classes E1–M3, making it suitable for a wide range of laboratory and workshop calibration needs. Does the case protect weights during transport? Yes. The aluminium exterior combined with a padded interior reduces shock transmission and prevents surface damage to weights during handling and transport. Manufacturer: KERN — Origin: China — Contact: not provided

Take advantage of a lightweight, polyamide handling tool that ensures a secure grip on small calibration weights up to 200 g; its 100 mm length combines fine control with easy handling for routine calibration tasks. Order directly via Metav Werkzeuge or consult our specialists for matching accessories and delivery from Emmerich. KERN 315-242 Tweezer (Polyamide, 100 mm) KERN 315-242 is a precision plastic tweezer for secure handling of small calibration weights in laboratories and workshops Secure grip for small calibration weights Suitable for weights E1–M3, 1 mg–200 g 100 mm length for precise handling Polyamide construction, lightweight 10 g Precision handling reduces contamination and measurement error The compact design provides a controlled hold when placing and removing calibration masses, helping to preserve the integrity of sensitive components. Made from polyamide, the instrument is gentle on metallic and plated surfaces and reduces risk of scratching or marking. The compatibility with 1 mg–200 g weights across E1–M3 classes means the tool supports a wide range of calibration workflows, supplying consistent handling where repeatability matters. Built for routine use, the tweezer contributes to faster setup times and fewer handling-related deviations. Comfortable length and light weight for repetitive tasks At 100 mm, the geometry balances reach and tactile feedback to enable precise positioning without overextension of the hand. The construction results in a lightweight tool — approximately 10 g — that decreases operator fatigue during repeated handling. The slim tips facilitate access to small masses and narrow pans, while the overall form factor supports careful handling during calibration runs. Clear, repeatable manipulation of weights improves throughput and aids adherence to internal quality procedures. Durable, easy-care design for laboratory and workshop environments The choice of high-quality plastic provides a durable and easy to clean solution suitable for environments where metal tweezers could risk scratching or produce magnetic influence. Maintenance is straightforward: wipe clean and store in a dry place to maintain tip alignment and performance. The tool's simple construction minimises service requirements and offers a dependable adjunct to balances, scales and precision measuring equipment in both calibration laboratories and industrial workshops. Contact Metav Werkzeuge today for tailored advice and supply of the KERN 315-242 tweezer; our Emmerich-based team can confirm suitability for specific calibration setups and arrange prompt delivery via the central European warehouse (info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271) Technical data Article number: 315 SKU: 315-242 Manufacturer: KERN GTIN: 4045761003439 Material: Polyamide (plastic) Facts Length: 100 mm Weight: 0.01 kg Suitable weight range: 1 mg–200 g Special features Secure grip for small calibration weights Suitable for weight classes E1–M3 Lightweight construction for reduced operator fatigue Simple cleaning and low maintenance FAQ What weight range is compatible with these tweezers? The KERN 315-242 tweezer is suitable for handling calibration weights from 1 mg up to 200 g. Which weight classes can be handled safely with this tool? This tweezer supports weights across classes E1 to M3, making it appropriate for a broad range of calibration tasks. Is the material safe for delicate or plated masses? Yes, the polyamide construction of the KERN 315-242 is designed to be gentle on delicate and plated surfaces, helping to avoid scratches. How should the tweezer be maintained to ensure longevity? Routine care for the KERN 315-242 involves simple cleaning with a soft cloth and storage in a dry place to preserve tip alignment and performance. Can this tool be used in both laboratory and workshop environments? The lightweight, easy-care design of the KERN 315-242 makes it suitable for calibration benches in laboratories as well as workshop settings where precise handling is required. Metav Werkzeuge, Emmerich am Rhein, Germany — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271