160mm Circular Saw Blade For Aluminium, 52 Teeth, 20mm Bore, 2.2mm Kerf, Carbide Tipped - Robert Bosch Power Tools GmbH

Take advantage of the combination of carbide-tipped Microteq teeth and a fine 52-tooth geometry for consistently clean, burr-free cuts in non-ferrous metals and coated panel materials. Order this precision blade directly via Metav Werkzeuge or contact our advisors for application guidance.

Circular saw blade EXPERT for Alu.AD 160 mm, 52 teeth – Carbide-tipped, 20 mm bore, 2.2 mm kerf

The Circular Saw Blade EXPERT for Alu.AD 160 mm Z.52 is designed for clean, low-burr cutting of non-ferrous metals such as aluminium and for precise finishing of plastics, laminate and various panel materials

• Carbide-tipped teeth for long life
• Optimised for aluminium and non-ferrous metals
• 52 precision Microteq teeth for fine finishes
• 20 mm bore for standard arbors

Precision finish for aluminium and delicate panels

The blade combines a 160 mm diameter with a 52-tooth layout to deliver a fine surface on thin sections and coated materials. Higher tooth counts reduce chipping and minimise secondary finishing, which translates into lower rework time on production runs. The 2.2 mm kerf balances stability and material removal so that feeds remain steady while keeping the cut narrow — beneficial when preserving component tolerances. For operators unfamiliar with kerf terminology: the kerf is simply the width of material removed by the blade and influences both waste and saw load.

Durable carbide cutting geometry for continuous operation

Equipped with carbide-tipped, Microteq teeth, the blade is engineered for extended service life under repetitive cutting cycles. Carbide tips resist wear far longer than high-speed steel, meaning fewer blade changes and reduced machine downtime. The Microteq tooth technology is specifically developed to maintain edge integrity on abrasive or coated panels, helping workshops maintain throughput without frequent tool replacement. This reliability supports a smoother production flow and predictable maintenance planning.

Versatile performance across engineered and composite substrates

The saw blade is suitable not only for aluminium and other non-ferrous metals but also for a range of composite and board materials including plastics, epoxy, raw chipboard, acoustic and lightweight panels, and fibreboard types such as MDF and OSB. That versatility allows one blade to serve multiple stages in small-batch fabrication or repair workshops. When cutting coated or abrasive-faced panels, the tooth geometry and carbide composition help limit edge breakout on both faces, yielding cleaner results for visible components.

Compatible fit and practical handling

With a 20 mm bore, the blade fits many standard arbors used in portable and bench-mounted circular saws; compatibility should be checked against the machine's mounting specification before use. The blade’s construction supports steady feed rates typical for aluminium work and fine panel finishing; matching feed speed and rpm to the material and saw will preserve tip life and surface quality. Replacement intervals depend on application intensity and material abrasiveness, but the carbide tips and Microteq design extend service life compared with conventional tooth geometries.

For workshops seeking burr-free aluminium cuts and durable performance, contact Metav Werkzeuge to secure the EXPERT circular saw blade or discuss suitability with our specialists via info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Item number: 4000815469NW
• Product label: Kreissägeblatt EXPERT for Alu.AD 160mm Z.52 HLTCG Bohr.20mm Schnitt-B.2,2mm
• Manufacturer: Robert Bosch Power Tools GmbH

Facts

• Diameter: 160 mm
• Teeth: 52
• Bore: 20 mm
• Cutting width (kerf): 2.2 mm

Special features

• Carbide-tipped teeth (hardmetal)
• Microteq tooth technology for high lifetime
• Designed for clean cuts in aluminium and non-ferrous metals
• Suitable for plastics, epoxy, chipboard, acoustic and lightweight panels
• Also for abrasive one- or two-sided coated panel materials and fibreboards such as MDF and OSB

FAQ

Which materials is the blade best suited for?
The EXPERT circular saw blade is optimised for aluminium and other non-ferrous metals and is also suitable for plastics, epoxy, raw chipboard, acoustic panels, lightweight panels and fibreboards such as MDF and OSB.

What does the 52-tooth count mean for the finish?
A 52-tooth configuration delivers a finer surface and reduced chipping compared with coarse blades, making it appropriate where minimal secondary finishing is required.

What is the arbor size required for mounting?
The blade has a 20 mm bore and requires a compatible arbor or suitable adaptor to fit the saw spindle securely.

How does Microteq improve performance?
Microteq tooth geometry enhances edge durability and wear resistance, extending cutting life on abrasive or coated materials and maintaining consistent cut quality.

Is this blade suitable for coated or abrasive-faced panels?
Yes — the carbide tips and tooth design reduce edge breakout on coated and abrasive-faced panels, supporting cleaner cuts on visible parts.

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com