200mm Rectangular Bar Form D HSS-EW9Co10 65-69 HRC h13, +/-2mm Tolerance - Werner Wilke Zerspanungstechnik GmbH

Take advantage of a high‑hardness, precision‑finished blank that combines HSS‑EW9Co10 alloy strength with strict dimensional tolerances for reliable tool production; order directly via Metav Werkzeuge or consult the sales team for application guidance.

Turning blank DIN 4964, Form D – HSS‑EW9Co10, rectangular 10 x 6 mm, 200 mm

A turning blank DIN 4964, Form D designed as a ready‑to‑machine tool blank for precision toolmaking and small turning operations, supplied hardened and finish‑ground for immediate use

• HSS‑EW9Co10 with 10% cobalt content
• Hardened to 65–69 HRC for wear resistance
• Rectangular section 10 x 6 mm, tolerance h13
• Precision ground length 200 mm, length tolerance ±2 mm

Reliable hardness and longer tool life for consistent production

The blank is manufactured from HSS‑EW9Co10, a high‑speed steel alloy with a 10% cobalt fraction that raises red‑hardness and wear resistance. With a declared hardness of 65–69 HRC, the material sustains cutting edges under thermal and mechanical load, reducing the frequency of regrinding and tool changes. This results in steadier production cycles and lower downtime for small‑batch tool production or sample turning operations.

Ready‑to‑use finish that shortens process time

Delivered hardened, tempered and finish‑ground, the component arrives with straight, unground ends and a finish suitable for immediate clamping and machining. The finish‑grinding minimises preparatory work and speeds up the transfer from stock to tool blank or holder, improving throughput. The cross‑section tolerance h13 and length tolerance ±2 mm ensure predictable clamping behaviour and repeatable set‑ups on toolmaking benches and CNC lathes.

Dimensional accuracy that supports precise toolmaking

The rectangular 10 x 6 mm section and a total length of 200 mm make the blank compatible with standard toolholders and jigs for producing custom lathe tools or small profile cutters. The material number 1.3207 identifies the alloy grade for specification sheets and heat‑treatment records. Clear dimensional data and conformity with DIN 4964, Form D help to integrate the blank into documented production routines and quality checks.

Application scope and practical machining advice

The blank is intended for toolmaking and turning‑related fabrication where high hardness and edge retention are required. As a finish‑ground blank made from high‑alloy HSS, it is suitable for shaping into cutting tips or small tooling components; machining should follow standard HSS practices, using appropriate coolant and moderate feeds to preserve the heat‑treated condition. The material’s behaviour under contact loads supports intricate regrinding and profile forming for specialist cutters.

Discuss material suitability or request a tailored delivery from Metav Werkzeuge; the sales team at Metav Werkzeuge can advise on application specifics and assist with order placement or technical queries

Technical data

• SKU: 4118420070NW
• Product type: Turning blank (Drehling)
• Material: HSS‑EW9Co10
• Manufacturer: Werner Wilke Zerspanungstechnik GmbH
• Label: Drehling DIN 4964 Form D rechteck.B.10mmxH.6mm HSS‑EW9Co10 L.200mm WILKE

Facts

• Length: 200 mm
• Cross‑section: 10 x 6 mm
• Hardness: 65–69 HRC
• Cobalt content: 10%
• Length tolerance: ±2 mm
• Cross‑section tolerance: h13
• Material number: 1.3207

Special features

• DIN 4964, Form D specification
• Rectangular section, finish‑ground
• Hardened and tempered
• Ends straight and unground
• Supplied as a ready‑to‑machine blank

FAQ

What materials is this turning blank suitable for?
The turning blank made from HSS‑EW9Co10 is primarily intended for toolmaking tasks where high hardness and wear resistance are needed; it is typically used to produce cutting components for machining steels and other common engineering materials.

Can the blank be reprofiled or re‑ground after initial shaping?
Yes, the hardened and finish‑ground condition allows controlled regrinding and reprofiling; the 65–69 HRC hardness provides excellent edge retention, while standard HSS grinding practices should be used to avoid overheating.

What tolerances can be expected for fitting into holders?
The blank has a cross‑section tolerance h13 and a length tolerance of ±2 mm, which gives predictable clamping and alignment for small toolholders and jigs intended for rectangular blanks.

Is the blank compliant with industry standards and documentation?
The product conforms to DIN 4964, Form D, and is supplied with the alloy designation 1.3207, enabling straightforward inclusion in quality documentation and production records.

How can the blank be ordered or where to get more technical data?
For ordering or additional technical information, refer to the SKU 4118420070NW when contacting the supplier; Metav Werkzeuge can provide application advice, delivery options and further specifications

Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com