2000g Precision Laboratory Balance 0.1g Readability Stainless Steel Pan 130×130mm DMS, LCD Display, 20h Battery - KERN

Take advantage of a compact, retrofit-ready solution for underfloor weighing of suspended loads; the hook is compatible with KERN 440 precision scales and designed for straightforward integration. Order or request advice directly via Metav Werkzeuge for fast, expert guidance. Hook 440-A01 — Underfloor weighing accessory for KERN precision scales The 440-A01 hook is a dedicated accessory for underfloor weighing, created to support the safe suspension and accurate measurement of hanging loads on KERN precision scales. Retrofit-ready for quick installation Compatible with KERN 440 precision scales Designed for underfloor weighing of suspended loads Improved flexibility for existing weighing systems The retrofit capability of this accessory makes it simple to upgrade existing scales without replacing the base unit. When fitted to compatible equipment, the hook enables reliable underfloor weighing of hanging items while preserving the original calibration and setup of the base scale. For workshops and production lines that require occasional changes to weighing configuration, this accessory reduces downtime and avoids the need for multiple specialised scales by extending the functionality of one trusted system. Precise handling of suspended loads for consistent results Engineered for the application of suspended-load measurement, the hook supports stable load suspension and helps to maintain the precision expected from industrial weighing equipment. By providing a dedicated interface between the load and the scale, the accessory contributes to repeatable results and reduces variables that can compromise measurement integrity. The design is intended to work in concert with KERN’s measurement electronics to preserve accuracy during routine weighing operations. Compact design with low handling weight for efficient logistics With a nominal weight of 0.01 kg, the hook is intentionally compact for easy handling and storage. The small footprint simplifies retrofitting in confined spaces and streamlines inventory management where multiple accessories are used across a fleet of scales. Supplied as a manufacturer‑specified accessory and noted for straightforward compatibility, this component supports efficient workshop workflows and helps maintain precise measurement capabilities with minimal logistic overhead. For confirmation of compatibility with specific models or to arrange supply of the KERN 440‑A01 hook, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on integration and availability. Technical data Article number: 440-A01 SKU: 440-A01 Manufacturer: KERN GTIN: 4045761068933 Origin: CN Numbers / Core technical data Weight: 0.01 kg ECLASS: 27400890 Tariff number: 84239010 Special features / Designs For underfloor weighing of suspended loads Compatible with KERN 440 precision scales Retrofit-ready; series-compatible accessory PCB (product data note) FAQ Is the hook compatible with KERN 440 scales? The hook 440‑A01 is designed for compatibility with KERN 440 precision scales and intended for underfloor weighing of suspended loads. Can the accessory be retrofitted to existing equipment? Yes, the 440‑A01 hook is retrofit-ready and specified for straightforward integration with compatible KERN units. What is the weight of the accessory? The 440‑A01 hook has a nominal weight of 0.01 kg. Is the material composition specified? Material details are not specified in the provided product data; please contact Metav Werkzeuge for further technical information. Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930

Reliable traceable reference for precise scale verification thanks to OIML M1 accuracy and a robust fine‑turned stainless steel finish; ideal where repeatable mass standards are required. Order the KERN 347-12 directly via Metav Werkzeuge or ask our consultants if needed. KERN 347-12 calibration weight — OIML M1, 2 kg, stainless steel The KERN 347-12 offers a compact, knob‑style calibration weight designed for verification and routine checks of laboratory and industrial scales. OIML class M1 for high-precision checks Nominal mass 2 kg with 100 mg tolerance Fine-turned stainless steel construction Knob form for safe handling and positioning Reliable reference for consistent measurement results A certified calibration weight in OIML M1 delivers a stable reference for repeatable verifications. With a nominal mass of 2 kg and a declared tolerance of 100 mg, this standard provides measurable assurance when validating balances or performing routine control checks. The defined tolerance supports clear decision thresholds for adjustments and repairs, reducing downtime and supporting quality control workflows in production and laboratory environments. Robust design that simplifies handling and storage The combination of fine‑turned stainless steel and a knob form gives the mass both corrosion resistance and ergonomic handling. The turned finish minimises surface irregularities that could trap contaminants, while the knob facilitates secure placement on pans and reduces the risk of accidental contact. This design choice prolongs service life and keeps handling errors to a minimum, contributing to reliable daily operation in workshops and test rooms. Conformity and calibration guidance for long-term traceability EC type approval for calibration weights will no longer be possible from 30 November 2025; therefore a DAkkS calibration is recommended for enduring legal and metrological traceability. A DAkkS certificate ensures national traceability chains and is accepted for most auditing and regulatory needs. Supplied from Germany, this standard mass supports documented traceability that is essential for accredited measurement routines and supplier quality agreements. For traceable verification with a trusted brand, request the KERN 347-12 through Metav Werkzeuge or consult our advisors for DAkkS calibration and delivery from Emmerich. Technical Data Article number: 347 SKU: 347-12 Manufacturer: KERN GTIN: 4045761008847 Tariff number: 84239090 Origin: Germany Facts Nominal mass: 2 kg Tolerance: 100 mg Dimensions (cyl.): 60 × 114 mm OIML class: M1 Special features Material: Fine-turned stainless steel Form: Knob form Product type: Single weight Recommendation: DAkkS calibration ECLASS: 32120103 FAQ What does OIML M1 mean for routine verifications? OIML M1 denotes a high-precision class; the KERN 347-12 meets this classification and is suitable as a reference for routine balance checks where a 100 mg tolerance is acceptable. Can this mass be used on workshop and laboratory scales? Yes, the 2 kg nominal mass and robust stainless steel construction make the weight appropriate for both industrial scales and laboratory balances, provided the balance capacity and accuracy class are compatible. How should the weight be handled to avoid errors? Handle the weight by the knob form and use clean gloves or tweezers; secure placement on a level pan minimises centre‑of‑gravity shifts and reduces handling-related deviations for the KERN 347-12. Is an EC type approval available for this weight? EC type approval for calibration weights will not be possible from 30 November 2025; instead, a DAkkS calibration is recommended to maintain traceability and audit acceptance for the KERN 347-12. How precise is the KERN 347-12 for calibration tasks? The declared tolerance is 100 mg for the 2 kg nominal mass, providing a reliable reference for control checks and routine verifications. KERN — Germany

Take advantage of robust protection for scale keyboards and housings, with a five-piece set that simplifies routine maintenance and reduces downtime; order the protective cover directly via Metav Werkzeuge or ask our consultants if needed. KERN 440-450-002S05 Protective Cover for 440-A/N — 5-piece set, for 130 x 130 mm platforms The KERN 440-450-002S05 is a protective cover designed to shield the scale keyboard and casing, suitable for use where weighing equipment requires reliable everyday protection in workshops and laboratories. Five-piece set for immediate replacement Fits 130 x 130 mm weighing platforms Protects keyboard and housing from dust and splashes Reduce maintenance and protect equipment A simple, economical barrier extends the service life of weighing instruments by preventing dust accumulation and ordinary contamination of the keyboard and housing. The cover reduces the need for frequent cleaning of sensitive components, which in turn lowers maintenance intervals and potential repair costs. As a lightweight, disposable solution, the set supports uninterrupted production by enabling quick replacement of worn covers, keeping instruments operational with minimal downtime. Designed for precise fit and practical use Engineered for scales with a 130 x 130 mm weighing surface and specifically matching the 440-A/N series, the cover ensures a tailored fit that does not impede access to controls or visibility of the display. This compatibility supports consistent weighing performance because the protection does not affect load cells or measurement accuracy. The pack format supplies multiple covers so a clean replacement is always at hand, maintaining accuracy and hygiene where repeatable results are essential. Streamline hygiene and operational readiness Supplying five covers in one package provides an efficient stock rotation for quality-focused shops and labs, supporting cleanliness protocols and reducing cross-contamination risks during routine handling. The solution is especially valuable in environments that require frequent changeovers or have strict cleanliness standards; each cover acts as a first line of defence against abrasive dust and incidental spillage, helping to safeguard sensitive electronics without complex maintenance procedures. For reliable protection and swift supply from Emmerich, contact Metav Werkzeuge to request the KERN 440-450-002S05 protective cover set or speak with our consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 440 SKU: 440-450-002S05 Manufacturer: KERN GTIN: 4045761185388 Facts Weight: 0.2 kg Country of origin: CN Commodity code: 39269097 eClass: 24322502 Special features Set contains 5 protective covers Protects keyboard and housing Suitable for weighing surfaces 130 x 130 mm Product group: Scales accessories Category path: Waagen › Zubehör FAQ What does the protective cover protect against? The KERN 440-450-002S05 protective cover shields the scale keyboard and casing from dust and light splashes, helping to reduce contamination and prolong equipment service life. Which scales are compatible with this cover? Compatibility is for scales with a 130 x 130 mm weighing surface; the cover is designed to fit the 440-A/N series and similar models with that platform size. How often should covers be replaced? Replacement depends on usage and environment; the five-piece set provides ready spares so covers can be changed whenever visible wear or contamination occurs to maintain hygiene and performance. Can the covers be cleaned and reused? These covers are intended as practical protection with straightforward replacement; if cleaning is attempted, ensure methods do not leave residues that could affect the keyboard or casing. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Conflicting product data detected: the battery runtime is listed as "up to 10h without backlight" and also as "20h runtime", which is inconsistent. This discrepancy in the provided information creates confusion and makes it difficult to generate a reliable product description. Accurate and consistent data is essential for creating a clear and trustworthy overview of the product's features and performance. Without clarification or further details to resolve these conflicting runtime specifications, it is not possible to ensure the accuracy of the description or provide potential customers with the necessary information to make an informed decision about the product.

Reliable 9 V / 300 mA output combined with a 100–240 V universal input and interchangeable international plug adapters supports uninterrupted use across workshops and while travelling; the compact, lightweight design keeps bench space clear and simplifies storage. Order the KERN YKA-03N directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN YKA-03N — Universal external power adapter with 9 V / 300 mA output and multi‑plug set The KERN YKA-03N is a compact universal external power adapter designed for scales and precision instruments, providing a steady 9 V / 300 mA supply and interchangeable plugs for EU, UK, US and CH mains sockets. Universal input 100–240 V, 50/60 Hz Stable 9 V DC output at 300 mA Interchangeable EU/UK/US/CH plug adapters Compact and lightweight, approx. 0.08 kg Reliable compatibility for mixed‑fleet workshops The adapter offers true international compatibility, accepting 100–240 V at 50/60 Hz, which eliminates the need for separate supplies when using instruments across different regions. This wide input range reduces logistic complexity for service technicians and procurement teams, ensuring the same power solution can be used for a variety of precision devices. The result is fewer inventory items and a more consistent power profile for bench‑level equipment. Practical plug set and travel convenience Delivered with interchangeable EU/UK/US/CH plug adapters, the unit supports rapid redeployment in different markets without additional accessories. The compact casing and lightweight construction (approx. 0.08 kg) make it suited to mobile test benches and field service kits. For applications that require frequent relocation of instruments, the adapter provides a tidy, portable option that minimises downtime and transport costs. Stable supply for sensitive measuring devices Designed as an external power source for scales and similar measuring equipment, the adapter supplies 9 V at 300 mA, matching common input requirements for precision instruments. The consistent voltage and current specification helps to maintain measurement stability and reduces the risk of fluctuations that can affect calibration results. This makes the unit appropriate for laboratory benches, inspection rooms and industrial scales where repeatable readings are essential. Clear integration into workshop supply chains As a universal external adapter, the device integrates easily with existing instrument fleets and cabling standards. The compact footprint frees up bench space, while the included plug set avoids compatibility delays when deploying equipment to different countries. For purchasing departments, the standardised specification simplifies procurement and stock management, supporting smoother operations and fewer interruptions. Choose the KERN YKA-03N for dependable international compatibility and contact Metav Werkzeuge in Emmerich for personalised advice and fast dispatch—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKA-03N Manufacturer: KERN GTIN: 4045761210431 Country of origin: CN Commodity code: 85044090 Core technical data Input voltage: 100–240 V, 50 / 60 Hz Output: 9 V DC, 300 mA Weight: approx. 0.08 kg Special features External universal power adapter for scales and precision instruments Interchangeable plug adapters included: CH, EURO, UK, US Compact form factor for bench and mobile use FAQ Is this adapter suitable for KERN scales and other precision instruments? The KERN YKA-03N is intended as an external power supply for KERN scales and comparable precision instruments that require a 9 V / 300 mA input. Which plug types are included with the adapter? The delivery scope for the adapter includes interchangeable plug adapters for EU, UK, US and CH mains sockets to support international use. Can the adapter be used worldwide without a separate voltage converter? Yes. The universal input of 100–240 V, 50/60 Hz enables operation across standard mains voltages without an additional converter. How portable is the unit for field service work? With a compact design and a weight of approximately 0.08 kg, the adapter is well suited to mobile toolkits and service engineers who require a lightweight power option. What is the exact model designation to order or reference? Refer to the SKU YKA-03N and manufacturer KERN when ordering or checking compatibility. KERN — Origin: China; SKU: YKA-03N; GTIN: 4045761210431