1600g Precision Balance 0.01g Readability, Stainless Steel Pan 150mm, DMS, IoT-Ready - KERN

Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Secure and compact accessory for underfloor weighing: a lightweight eyelet and hook that ensures dependable load attachment and straightforward compatibility with KERN floor-scale models. Supplied as a single unit and weighing only 0.05 kg, it supports efficient workflow and simple inventory management; order the accessory directly via Metav Werkzeuge or ask our consultants if needed. Eyelet and Hook 572-A03 — Underfloor Weighing Accessory, KERN Compatible The Eyelet and Hook 572-A03 is an accessory for underfloor weighing systems that provides a secure attachment point for suspended loads on compatible KERN floor scales. For underfloor weighing systems Compatible with KERN 572 models Supplied as 1 piece Lightweight: 0.05 kg Secure attachment that reduces handling uncertainty The accessory offers a dedicated eyelet and hook solution tailored to underfloor weighing applications, enabling clear and repeatable load connections. By providing a defined connection point, the component reduces variable load positioning and contributes to more consistent weighing results. The compact design, at 0.05 kg, minimises inertia during handling and fits seamlessly into standard scale setups, making it practical for routine use in production, shipping and quality-control environments. Compatibility tailored to precision weighing Designed as an accessory for the KERN 572 product family, this hook and eyelet set is intended for use with floor scales that require a reliable method for hanging or suspending items. The component is suitable for models specified with a readability of 0.01 g, ensuring that the attachment method complements high-resolution measurement tasks. Compatibility with established scale models simplifies procurement and reduces the need for custom adaptors, supporting efficient integration into existing weighing stations. What is supplied and why it matters The delivery content is concise: 1 piece — an eyelet and a hook ready for immediate installation. A single, purpose-built unit keeps spare-parts lists short and simplifies stock management. For users less familiar with suspension attachments, the design offers a straightforward mechanical interface that clarifies how items should be hooked and prevents ad hoc solutions that can degrade measurement repeatability. Where tighter tolerances are required, using a specified accessory reduces unnecessary variability at the point of weighing. Contact Metav Werkzeuge for compatibility checks and fast dispatch from Emmerich; our consultants will advise on the KERN 572-A03 and its fit for specific floor-scale setups Technical data Article number: 572 SKU: 572-A03 Manufacturer: KERN Facts Weight: 0.05 kg Readability suitability: models with readability 0.01 g Special features Accessory for underfloor weighing Compatible with KERN 572 models Scope of delivery: 1 piece Segment: Accessories Product group: Hook FAQ What is the primary use of this accessory? The eyelet and hook 572-A03 (KERN accessory) is used for secure load attachment in underfloor weighing systems, providing a fixed point for suspended items. Which scales is it compatible with? Compatibility is defined for KERN 572 models; the 572-A03 is intended for those KERN floor scales that accept an external hook or eyelet accessory. Is the scope of delivery complete for immediate use? Yes. The scope of delivery for the KERN 572-A03 comprises 1 piece — the eyelet and hook — supplied ready for installation. What is the weight of the accessory? The KERN 572-A03 weighs 0.05 kg. Can it be used with high-resolution scales? The 572-A03 is suitable for models specified with a readability of 0.01 g, aligning the attachment method with precision weighing requirements. Manufacturer: KERN — Address: not provided — Contact: not provided