CCGT 09T302 NS9530 Wendeplatten - Tungaloy

Take advantage of the uncoated cermet NS9530 and the 80° rhombic geometry with a 0.2 mm nose radius for consistent finishing performance and low cutting forces; order the insert directly via Metav Werkzeuge or consult their application specialists for machining parameters.

CCGT09T302 NS9530 CCGT — ISO turning insert for finishing, Tungaloy

A CCGT09T302 NS9530 rhombic ISO turning insert designed as a finishing grade for steel, combining a sharp cutting edge with stable chip control.

• Uncoated cermet grade NS9530
• For finishing turning on steel
• 80° rhombic geometry, 0.2 mm nose radius
• Cylindrical hole with 40°–60° countersink

Exceptional surface quality with low cutting forces

The insert is designed as a finishing grade using the NS9530 uncoated cermet, which provides a sharp cutting edge and reduced cutting resistance. For finishing passes on steel, this results in improved surface finish and minimal tool-induced vibration. The composition of the cermet offers a balance between edge strength and wear resistance, making the cutting edge particularly effective for continuous cuts and small depths of cut while keeping the energy input per pass low.

Geometry tuned for stability and predictable chip behaviour

The 80° rhombic outline and the 0.2 mm nose radius deliver a predictable contact geometry that reduces radial cutting forces and supports consistent dimensional control. The integrated single-sided chipbreaker is optimised for continuous cutting, breaking chips reliably at small feeds and helping to avoid built-up edge. A small nose radius is advantageous for tight tolerances and fine surface finishes, as it concentrates the cutting action while lowering the tendency for chatter on less rigid set-ups.

ISO conformity and secure mounting for reliable setup

Marked as an ISO-type CCGT insert, compatibility with a holder is determined by form, relief angle, tolerance class, fastening, size and thickness. The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a plate thickness of 3.97 mm, which supports standard clamping systems and predictable seating. This ISO conformity simplifies tool selection and reduces setup time, ensuring repeatable clamping and consistent tool life across batches and machines.

Practical machining guidance for finishing on steel

As an uncoated finishing grade, the insert performs best in continuous cuts and modest feed rates where the excellent cutting edge yields superior topography. Matching the NS9530 grade with appropriate cutting data—reduced feed and moderate cutting speeds for final passes—will retain edge integrity and surface integrity. For interrupted cuts or unstable workholding, consider a different chipbreaker or a more robust grade; for stable finishing operations, the insert delivers controlled material removal and superior surface quality. The insert CCGT09T302 is particularly suited to external and internal turning where fine finishes and tight tolerances are required.

For finishing-focused turning applications, request availability and application advice for the Tungaloy CCGT09T302 NS9530 insert from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6714354
• SKU: 6714354-Tungaloy
• Manufacturer SKU: TUN6714354
• Model series: ISO-Drehwendeschneidplatten
• ISO designation: CCGT09T302
• Manufacturer: Tungaloy

Facts

• Angle: 80°
• Relief angle: 7°
• Nose radius: 0.2 mm
• Thickness: 3.97 mm
• Insert size: 09

Special features

• Grade: NS9530
• Cutting material type: uncoated cermet
• Plate form: rhombic
• Chipbreaker: single-sided
• Hole: cylindrical hole + one-sided countersink (40°–60°)
• Application: Drehen (turning)
• Typical use: External and internal finishing

FAQ

What turning operations is this insert suited for?
The CCGT09T302 NS9530 insert is intended for external and internal turning operations, especially finishing passes on steel where a sharp edge and fine surface finish are required.

Is the CCGT09T302 coated or uncoated?
The CCGT09T302 is an uncoated cermet (NS9530) grade, optimised for low cutting forces and high surface quality in finishing applications.

What does the 0.2 mm nose radius mean for machining?
A 0.2 mm nose radius concentrates the cutting action to enable tighter tolerances and smoother finishes; it is ideal for small depths of cut and applications where dimensional accuracy and surface integrity are priorities.

Which clamping criteria determine holder compatibility?
Compatibility depends on form, relief angle (7°), tolerance class, fastening, size (09) and plate thickness (3.97 mm); the ISO CCGT designation simplifies matching to standard holders.

What is the hole and countersink specification?
The insert features a cylindrical hole with a one-sided countersink in the 40°–60° range, providing secure seating and standardised clamping for ISO-style toolholders.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.