SNGU 1307AN AH120 Wendeplatten - Tungaloy

Take advantage of the combination of high material‑removal performance, a PVD‑coated AH120 carbide grade and a robust square geometry for secure, repeatable milling results; order the SNGU1307AN insert directly via Metav Werkzeuge or consult our specialists for application advice.

SNGU 1307AN AH120 – indexable insert for high‑feed milling by Tungaloy, PVD‑coated carbide, square 90°

SNGU1307AN AH120 is an indexable square insert designed for high‑feed milling, pocketing and face milling in modern production environments.

• DoFeed high‑feed milling family
• PVD‑coated carbide AH120
• Wear‑ and chip‑resistant grade
• Square 90° geometry with hole

Maximise material removal with a high‑feed design

The DoFeed family is engineered for large time‑volume removal at small axial depths, making the insert ideal for continuous high‑feed milling cycles. The combination of a high‑feed geometry and a robust carbide substrate delivers increased metal removal rates while keeping cutting forces manageable. This balance supports shorter cycle times and higher productivity on both batch and serial production runs, with benefits measurable in throughput rather than single‑cut performance. The PVD‑coated AH120 grade provides a sharp edge and consistent initial cutting performance, helping to sustain efficient machining under typical high‑feed conditions.

Reliable cutting edge and improved process security

A PVD coating on a wear‑resistant substrate reduces flank wear and improves resistance to chipping, which increases tool life and stabilises the process window. The insert’s geometry with a 90° profile and double‑sided chipformer ensures predictable chip control and consistent surface quality in pocketing and face milling. The presence of a cylindrical hole with a double‑sided countersink (40°–60°) adds secure clamping and straightforward indexing. Together, these design features deliver process security, minimising downtime for edge changes and helping to maintain part tolerances across production shifts.

Simple integration into modular milling systems

The insert is supplied as part of a system comprising a milling body, matching indexable plates and screws, enabling quick replacement and repeatable seating. The square format and a 13 mm radius across the sides allow flexible orientation for multiple cutting edges per insert, while the 7.94 mm thickness gives mechanical stability under intermittent loads. Using an indexable solution reduces inventory and handling compared with solid tools and simplifies reconditioning logistics: worn edges are indexed, not ground, for fast turnaround and lower tooling cost per component.

Application guidance and operator benefits

This insert is particularly suited to operations requiring sharp edges and robust performance; typical uses include pocketing, stepped face milling and high‑feed passes where low axial engagement is preferred. The AH120 grade excels where a balance of initial sharpness and anti‑chipping behaviour is required, supporting repeatable results across common materials compatible with carbide tools. For machining strategies that prioritise cycle time and consistent surface quality, the insert offers a practical route to improved efficiency while easing machine load management and tool‑change frequency.

Contact Metav Werkzeuge for application support, availability and tailored recommendations on the SNGU1307AN AH120 indexable insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6735444
• SKU: 6735444-Tungaloy
• Manufacturer SKU: TUN6735444
• Brand: Tungaloy
• Model series: DoFeed
• Application: milling
• Grade: AH120

Facts

• Size: 13 mm
• Thickness: 7.94 mm
• Geometry angle: 90°
• Corner radius: 0 mm
• Relief angle: 0°
• Hole: yes
• Countersink: 40°–60°

Special features

• PVD‑coated carbide AH120
• Square insert, double‑sided chipbreaker
• Cylindrical hole with double‑sided countersink
• Designed for high‑feed, pocketing and face milling
• System: insert, matching milling body and screws

FAQ

What materials is this insert suited for?
The SNGU1307AN AH120 indexable insert is designed for general milling tasks where a sharp edge and process security are required; the PVD‑coated carbide grade performs well across common steels and general workshop materials compatible with carbide tooling.

Can the insert be used for pocketing and face milling?
Yes, the square geometry and the double‑sided chipformer make the insert suitable for both pocketing and face milling, offering consistent chip control and surface finish in these operations.

How does the insert attach to the milling body?
The insert features a cylindrical hole and a double‑sided countersink (40°–60°) for secure clamping within the milling body; the design supports fast indexing and repeatable seating.

What are the key dimensions to consider for tool selection?
Important dimensions include the 13 mm size, 7.94 mm thickness and the 90° geometry; these determine compatibility with the milling body and the cutting kinematics.

How does the AH120 grade affect cutting performance?
The AH120 PVD‑coated carbide grade balances a sharp cutting edge with improved resistance to wear and chipping, supporting stable machining and longer edge life in many milling strategies.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.