DCGT 11T301 SH725 Wendeplatten - Tungaloy

Benefit from the combination of a coated carbide SH725 grade and a 0.1 mm corner radius for consistent surface finish and extended edge life; the ISO geometry ensures straightforward integration into standard toolholders. Order directly via Metav Werkzeuge or request application advice from the sales consultants.

DCGT 11T301 SH725 indexable turning insert — rhombic 55° geometry by Tungaloy

A DCGT11T301 SH725 indexable insert designed for general turning operations, offering a balanced mix of toughness and edge stability for variable engagement conditions.

• SH725 coated carbide grade
• Rhombic insert, 55° included angle
• 0.1 mm corner radius for fine finishing
• Cylindrical hole with 40°–60° countersink

Precision and consistent surface quality for turning

The rhombic geometry with a 55° included angle delivers a stable cutting edge for both external and internal turning, while the 0.1 mm corner radius reduces the risk of chatter and supports a fine surface finish. Specified as ISO DCGT11T301, the geometry conforms to international holder standards, which simplifies tool selection and reduces setup time. This combination of repeatable geometry and a small corner radius makes the insert especially suitable where dimensional consistency and predictable tool behaviour are required.

Robust grade and coating for variable engagement

The SH725 grade is a coated carbide designed for toughness and edge stability, giving reliable performance with smaller tools or when cut conditions vary. The coating reduces flank wear and helps maintain a sharp cutting edge under interrupted cuts, which translates into longer effective tool life and fewer indexings. For process planners, this means lower tooling consumption and steadier output quality during mixed-batch production.

Secure clamping and geometry details that support productivity

Clamping integrity is aided by the cylindrical hole with a one-sided countersink (40°–60°), together with a plate thickness of 3.97 mm, which together ensure stable seating in compatible holders. The insert’s 7° clearance helps prevent rubbing on the workpiece while maintaining cutting efficiency. These measurable parameters inform fixture selection and torque specifications for secure fastening, reducing the likelihood of vibration-related wear and improving cycle-to-cycle reproducibility.

Practical application guidance and system compatibility

The single-side chipbreaker design makes the insert suitable for a range of chip-formation conditions; pairing the single-side chipbreaker with the correct grade and geometry supports controlled chip flow and easier chip evacuation. Used in a standard ISO turning system — insert, matching external holder or boring bar, shim/seat and clamping screw — the component integrates into most production lines without complicated adapter work. For optimised results, match the chipbreaker and SH725 grade to the workpiece material and cutting parameters.

Contact Metav Werkzeuge for tailored application advice on the DCGT11T301 SH725 insert or to discuss delivery and availability at info@metav-werkzeuge.com or +49 2822 7131930

Technical Data

• Article number: 6737015
• Manufacturer SKU: TUN6737015
• Metav SKU: 6737015-Tungaloy
• Model series: ISO turning inserts

Numbers / Core technical data

• Corner radius: 0.1 mm
• Included angle: 55°
• Clearance angle: 7°
• Thickness: 3.97 mm
• Size: 11

Designs / Special features

• Rhombic insert form
• With cylindrical hole and one-sided countersink (40°–60°)
• Single-side chipbreaker
• Coated carbide, grade SH725
• Intended use: turning
• Compatibility depends on holder form, clearance, tolerance class, fastening, size and thickness

FAQ

What turning tasks is this insert designed for?
The DCGT11T301 SH725 insert is intended for external and internal turning operations where a durable, edge-stable coated carbide is required; it is especially effective in smaller tools or varying engagement conditions.

Which holders are compatible with the ISO DCGT11T301 geometry?
Compatibility is determined by the holder’s form, clearance angle, tolerance class, fastening method, size and plate thickness; holders that accept ISO DCGT 11T301 inserts will fit the DCGT11T301 SH725 insert.

How does the SH725 grade affect performance?
SH725 is a tough, coated carbide grade that improves edge stability and resistance to wear, making the insert suitable for interrupted cuts and applications where consistent edge life is important.

What role does the 0.1 mm corner radius play in machining?
A 0.1 mm corner radius reduces cutting stress concentration and vibration tendency, helping to achieve a finer surface finish while balancing tool strength for light to medium finishing cuts.

How is the insert secured in the tool assembly?
The insert features a cylindrical hole with a one-sided countersink (40°–60°) and a 3.97 mm plate thickness; these elements support secure seating with the appropriate clamping screw, shim or clamping set in standard ISO toolholders.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.