DCGT 070202 SH725 Wendeplatten - Tungaloy

Take advantage of the combination of SH725 coated carbide for stable cutting edges and the ISO rhombic 07 geometry with a 0.2 mm corner radius to ensure reliable, repeatable turning performance; order directly via Metav Werkzeuge or consult the technical team for application advice.

DCGT 070202 SH725 — ISO turning insert, coated carbide by Tungaloy

A DCGT 070202 SH725 indexable insert designed for ISO‑compliant external and internal turning, optimised for small‑tool operations and varying engagement conditions

• ISO-compliant rhombic 07 geometry
• SH725 coated carbide, edge-stable grade
• 7° relief angle for versatile turning
• Cylindrical hole with 40°–60° countersink

Stable cutting performance where small tools and variable engagement meet

The SH725 grade is a coated carbide developed for tough, edge‑stable performance in turning operations that experience fluctuating cutting conditions. Its formulation emphasises resistance to chipping and a steady tool life, making it suitable for shorter‑run production and mixed batch work where frequent tool changes or varying feeds occur. The combination of SH725 and the rhombic geometry supports consistent cutting behaviour and reduced downtime through fewer insert changes.

ISO geometry for straightforward holder compatibility and secure clamping

Built to the ISO DCGT070202 standard, the insert features the familiar rhombic 07 outline and a 7° relief angle, which simplifies selection of matching external holders or boring bars. Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness—this insert’s ISO conformity reduces uncertainty when integrating into existing tool systems. The cylindrical hole with a single‑side countersink (40°–60°) ensures firm seating and repeatable indexing when used with the correct clamp set and replacement screws.

Controlled chip formation and reliable finish with a 0.2 mm corner radius

A 0.2 mm corner radius provides a balance between edge strength and surface quality: it strengthens the cutting edge under intermittent cuts while still delivering acceptable surface finish in general turning. The single‑sided chipbreaker is tailored for predictable chip control, helping to avoid long, tangled chips and supporting safer, more efficient swarf evacuation. For customers seeking dimensionally consistent results, the insert’s geometry and chipbreaker together aid in achieving repeatable part tolerances and improved process stability.

Practical system integration and workshop advantages

As part of an ISO turning insert system, the unit works in combination with a matching external holder or boring bar, plus an underlay/clamping set and spare screws for maintenance. The plate thickness of 2.38 mm and the standardised size designation make stock management and replacement straightforward. Using this insert within a controlled tooling concept reduces set‑up time and supports predictable cycle times, which in turn enhances overall machining productivity and reduces per‑part cost through longer effective tool life.

For application-specific advice or to order Tungaloy SH725 inserts, contact Metav Werkzeuge for tailored recommendations and immediate availability via info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6737245
• SKU: 6737245-Tungaloy
• Manufacturer SKU: TUN6737245
• Model series: ISO-Drehwendeschneidplatten
• Grade: SH725

Facts

• Corner radius: 0.2 mm
• Relief angle: 7°
• Insert angle: 55°
• Thickness: 2.38 mm
• Size designation: 07

Special features

• Rhombic insert shape (DCGT)
• One-sided chipbreaker
• Cylindrical hole with single-side countersink (40°–60°)
• ISO designation DCGT070202
• Coated carbide cutting material
• Intended application: Turning

FAQ

What turning tasks suit this insert best? This insert is intended for general external and internal turning; the SH725 grade gives good edge stability for mixed engagement and smaller‑tool applications.

Which holders are compatible with this geometry? Holders compatible with the ISO DCGT070202 profile and a 7° relief angle provide the required fit; secure clamping is achieved using a matching underlay and clamping set.

How does the 0.2 mm corner radius affect part finish and tool life? A 0.2 mm radius increases edge robustness under interrupted cuts while maintaining acceptable surface finish, helping to extend the effective tool life of the insert.

Is the chip control suitable for automated machining cells? Yes, the single‑sided chipbreaker promotes predictable chip formation and easier evacuation, which supports automated turning processes and safer unattended operation.

What product reference should be used when ordering spare inserts? Order using Article number 6737245 or SKU 6737245-Tungaloy to ensure the correct DCGT070202 SH725 insert is supplied.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.