CCMT 060204 T9215 Wendeplatten - Tungaloy

Take advantage of a combination of high wear resistance, robust fracture toughness and ISO compatibility for reliable medium‑steel turning. Order the insert directly via Metav Werkzeuge or consult our specialists if required.

CCMT060204 T9215 ISO turning insert by Tungaloy — CVD‑coated carbide, 0.4 mm corner radius

The CCMT060204 T9215 is an ISO‑standard indexable turning insert for medium steel turning, offering a balance of wear resistance and fracture toughness in continuous to lightly interrupted cuts.

• CVD‑coated carbide for high wear resistance
• 0.4 mm corner radius for controlled edge strength
• ISO rhombic form 06 with 80° included angle
• One‑sided chipbreaker and cylindrical hole with countersink

Productivity gains from robust coating and grade

The combination of a CVD‑coated surface and a cemented carbide substrate delivers consistently extended tool life in medium‑steel applications, reducing unplanned tool changes and downtime. The T9215 grade has been formulated to balance wear resistance with fracture toughness, which means the insert sustains higher cutting forces and maintains edge integrity during longer production runs. For manufacturers seeking stable, repeatable machining cycles, this behaviour translates directly into higher throughput and lower unit costs.

Precision and compatibility that simplify setup

Designed to the ISO series for turning inserts, the geometry—rhombic form 06 with an 80° included angle, 7° relief angle and 2.38 mm plate thickness—ensures predictable seating and clamping in standard holders. Compatibility with a holder depends on shape, relief, tolerance class, clamping method, size and thickness; matching these parameters avoids misalignment and improves concentricity. The insert’s 0.4 mm corner radius offers a compromise between strength and finish, giving controlled chip formation without excessive tool pressure.

Practical performance in real machining conditions

A one‑sided chipbreaker and the specified hole style (cylindrical hole with a single‑side countersink at 40°–60°) help direct chips away from the workpiece and clamp, reducing recutting and heat concentration. This is particularly beneficial for continuous to slightly interrupted cuts in medium‑hard steels, where consistent chip control minimises surface defects and the need for secondary finishing. The grade’s tendency for stable chip formation supports predictable tool wear, which in turn simplifies process parameter selection and tool‑change scheduling.

Selection advice and application fit

Use this indexable insert when turning medium steel components that require a balance of surface quality and production speed, such as shafts, bushes and general turned parts. The insert performs well in continuous operations and tolerates slight interruptions; for heavy interruptions or very soft non‑ferrous alloys, consider a different chipbreaker or geometry. When replacing or specifying inserts, cross‑check the holder’s seat form, clamping arrangement and tolerance class to guarantee correct fit and optimum performance.

For reliable medium‑steel turning with Tungaloy’s proven T9215 grade, contact Metav Werkzeuge for availability and tailored advice on cutter‑holder compatibility

Technical data

• Article number: 6772429
• Manufacturer SKU: TUN6772429
• Shop SKU: 6772429-Tungaloy
• Designation: CCMT060204 T9215
• Brand: Tungaloy

Facts

• Corner radius: 0.4 mm
• Relief angle: 7°
• Included angle: 80°
• Insert size: 06
• Plate thickness: 2.38 mm
• ISO designation: 060204

Special features

• CVD‑coated cemented carbide grade T9215
• Suited for medium steel turning; continuous to slightly interrupted cuts
• One‑sided chipbreaker
• With cylindrical hole and single‑side countersink (40°–60°)
• ISO‑standard rhombic insert compatible with conventional holders

FAQ

What materials is this insert suitable for?
The CCMT060204 T9215 insert is designed primarily for medium‑steel machining; the T9215 grade balances wear resistance and fracture toughness for productive steel turning.

How does the 0.4 mm corner radius affect performance?
A 0.4 mm corner radius increases edge strength for improved resistance to chipping while still allowing a good surface finish on turned components.

Is the insert compatible with standard ISO holders?
Yes; the insert follows ISO geometry for rhombic inserts (06 size), but compatibility depends on holder form, relief, tolerance class, clamping and thickness matching.

Can this insert handle interrupted cuts?
The T9215 grade tolerates slight interruptions due to its fracture resistance, but heavy interrupted cutting may require a different geometry or a more robust grade.

What is the chip control solution on this insert?
This item features a one‑sided chipbreaker and a cylindrical hole with a single‑side countersink (40°–60°) to support stable chip evacuation and secure clamping.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.