CCGT 060200 J740 Wendeplatten - Tungaloy

Take advantage of the combination of robust Tungaloy carbide grade, ISO‑standard geometry and precise mounting features for consistent turning results; order directly via Metav Werkzeuge or consult our specialists for holder compatibility and optimal chipbreaker selection.

CCGT 060200 J740 turning insert (ISO 060200) by Tungaloy

The CCGT060200 J740 is a rhombic turning insert intended for external and internal turning, offering a 7° clearance and a one‑sided chipbreaker for stable material removal.

• ISO‑standard rhombic insert size 06
• Tungaloy J740 carbide grade
• 7° clearance angle for versatile turning
• Cylindrical hole with 40°–60° countersink

Productivity through stable wear resistance and repeatability

The design of this indexable tool emphasises economic machining cycles by combining a wear‑resistant cemented carbide substrate with a grade tuned for turning operations. The J740 grade balances hardness and toughness to extend edge life under varying cutting conditions; this translates into fewer interruptions for insert changes and more predictable process planning. When used in a suitable holder, the geometry and material pairing minimise flank wear and maintain dimensional consistency across production batches, supporting leaner setups and improved uptime.

Reliable chip control and geometry benefits for turning

A focused geometry reduces thermal and mechanical loading at the cutting edge: the rhombic shape with an included angle of 80° and the one‑sided chipbreaker direct chips reliably away from the cutting zone. The 7° clearance angle helps prevent rubbing while preserving form at the workpiece, making the insert suitable for both finishing and moderate roughing passes depending on stability. Explaining the chipbreaker: it moderates chip thickness and curl to avoid entanglement and promote evacuation, which is particularly useful on long, slender parts or interrupted cuts where chip control is critical.

Compatibility, mounting and selecting the right holder

Compatibility with clamping systems depends on form, clearance angle, tolerance class, fixation and thickness; the insert’s cylindrical hole with a single‑sided countersink (40°–60°) provides a standard method for secure fastening. When specifying a holder, match the plate size (06), thickness 2.38 mm, and the ISO pocket geometry to achieve correct seat and clamp engagement. Using the proper combination prevents micro‑movement at the interface, safeguarding edge life and ensuring repeatable positioning during tool indexation.

Suitable materials and practical application notes

The grade is designed for general turning tasks; select the chipbreaker and cutting data to match the workpiece material and stiffness of the setup. The insert’s balance of toughness and hardness makes it appropriate for a broad range of materials encountered in general turning operations; adjustments in feed and depth of cut help tailor performance to specific steels, alloyed materials or cast components. For internal turning, ensure sufficient rigidity in the bar and holder assembly to fully exploit the insert’s cutting potential.

Why choose a Tungaloy grade for production reliability

Tungaloy’s material development focuses on achieving a stable cutting edge under industrial conditions. The J740 grade complements the insert geometry to deliver steady performance in repetitive machining tasks, reducing scrap risk and enabling predictable tool change cycles. In process chains where repeatability and tool life are priorities, this combination supports consistent surface quality and dimensional control over longer runs.

Contact Metav Werkzeuge today to specify the CCGT 060200 J740 insert and confirm holder compatibility, clamp style and optimal chipbreaker selection for the intended turning application.

Technical data

• Article number: 6801254
• Manufacturer SKU: TUN6801254
• SKU: 6801254‑Tungaloy
• Model series: ISO‑Drehwendeschneidplatten
• Material: Hartmetall

Facts

• ISO code: 060200
• Insert size: 06
• Thickness: 2.38 mm
• Clearance angle: 7°
• Included angle: 80°
• Hole: with hole
• Hole style: cylindrical hole + single‑side countersink 40°–60°

Special features

• Rhombic plate form
• One‑sided chipbreaker
• Designed for external and internal turning
• Tungaloy grade J740
• ISO‑standard geometry for holder compatibility

FAQ

What pocket and clamp features are required for this insert?
The CCGT060200 J740 insert needs a pocket matching ISO 060200 geometry with secure clamping that accommodates a cylindrical locating hole and the single‑side countersink to ensure stable seating.

Which applications suit the J740 grade best?
The J740 grade on this indexable insert is intended for general turning operations where a balance of wear resistance and toughness is required, supporting both finishing and moderate roughing passes.

Can this insert be used for internal turning?
Yes, the insert’s geometry and chip control make it suitable for internal turning provided the bar and holder offer adequate rigidity for the chosen cutting parameters.

How does the one‑sided chipbreaker affect performance?
The one‑sided chipbreaker moderates chip flow and thickness to improve evacuation and reduce the risk of chip re‑cutting, which benefits surface finish and tool life in many turning scenarios.

Is the insert compatible with holders from different manufacturers?
Compatibility is determined by form, clearance angle, tolerance class, fixation, size and thickness; using holders that conform to ISO standards for the 06 size and 060200 designation ensures interchangeability with the CCGT060200 J740.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.