CCGT 060200 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of a sharp TH10 uncoated cemented‑carbide grade, precise ISO CCGT060200 geometry and secure mounting features for consistent surface finish and reduced cutting forces; order via Metav Werkzeuge or contact our consultants for application advice.

CCGT 060200 TH10 turning insert by Tungaloy — ISO rhombic 80° geometry, uncoated carbide

CCGT 060200 TH10 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a sharp universal grade for non‑ferrous materials and finishing tasks

• ISO CCGT insert, rhombic 80° form
• Sharp uncoated TH10 cemented‑carbide grade
• 7° relief angle and 2.38 mm thickness
• Cylindrical hole with single‑side countersink (40°–60°)

Improved productivity through efficient cutting geometry

The CCGT060200 TH10 insert combines an uncoated cemented‑carbide edge with an 80° rhombic geometry to deliver lower cutting forces and reliable edge engagement when turning non‑ferrous components. The sharp grade supports reduced thrust and improved surface integrity, which translates into fewer secondary operations and higher throughput. In practical terms, the uncoated TH10 grade encourages clean chip formation and favours finishing passes where minimal rubbing and low cutting temperatures are required, making it suitable for precision turning tasks.

Secure clamping and ISO compatibility for predictable results

Compatibility with a toolholder depends on form, 7° relief angle, tolerance class, fastening method, size and thickness; verifying these parameters avoids misfits and chatter. The ISO format of the insert simplifies selection: holders designed for the CCGT style accept the rhombic 80° shape and the 2.38 mm slab thickness for stable clamping. The central hole — cylindrical with a single‑side countersink (40°–60°) — ensures repeatable fastening and allows the use of standard screws and clamping sets, reducing setup time and minimising production downtime.

Application benefits: chip control and surface quality for non‑ferrous work

A single‑sided chipbreaker matched to the grade provides controlled chip formation for aluminium, brass and similar alloys, helping to avoid entangling or long stringy chips. The combination of geometry and sharp cutting edge improves finishing capability, yielding better surface roughness with fewer passes. When selecting inserts for a specific job, match the chipbreaker and grade to the workpiece material and machining stability to balance tool life and surface quality. For delicate turning operations, this specification offers a pragmatic balance between edge life and the low cutting forces required for high‑quality finishes.

For reliable non‑ferrous turning with the TH10 uncoated cemented‑carbide insert, contact Metav Werkzeuge for tailored recommendations and application support at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6801261
• SKU: 6801261-Tungaloy
• Manufacturer SKU: TUN6801261
• Designation: CCGT060200 TH10

Facts

• Included angle: 80°
• Relief angle: 7°
• Thickness: 2.38 mm
• Size: 06
• With hole: yes

Special features

• Material: cemented carbide
• Grade: TH10 (uncoated)
• Shape: rhombic
• Hole style: cylindrical hole + single‑side countersink (40°–60°)
• Chipbreaker: single‑sided
• Application: Turning
• Compatibility: dependent on holder form, relief angle, tolerance class, fastening, size and thickness

FAQ

Which materials suit this insert best?
The CCGT060200 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass, and for applications that prioritise low cutting forces and clean surface finish.

How can compatibility with a holder be confirmed?
Check holder acceptance for the CCGT geometry, the 7° relief angle, size 06, 2.38 mm thickness and the central hole/countersink specification to ensure correct clamping and alignment.

Is the TH10 grade coated?
No, the TH10 grade is an uncoated cemented‑carbide formulation chosen to provide a sharp edge, lower cutting forces and improved finish on non‑ferrous alloys.

What chip control can be expected?
The single‑sided chipbreaker creates predictable chip shapes suitable for turning non‑ferrous work and supports consistent surface quality during finishing cuts.

Can this insert be used for both external and internal turning?
Yes — the ISO‑standard geometry and rhombic form make it suitable for both external and internal turning, provided the correct holder and clamping are used.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.