CCGT 060202 TH10 Wendeplatten - Tungaloy

Benefit from a low‑force cutting edge and clean surface finish combined with ISO compatibility and a compact rhombic geometry; these qualities support efficient turning operations and predictable tool life. Order the CCGT060202 TH10 insert directly via Metav Werkzeuge or consult our specialists for application‑specific guidance.

CCGT 060202 TH10 — Indexable turning insert by Tungaloy for precision external and internal turning with 7° clearance

CCGT060202 TH10 Tungaloy‑Wendeplatte — an ISO‑standard rhombic insert designed for turning applications where low cutting forces and fine surface finish are required; suitable for non‑ferrous materials and light finishing cuts.

• ISO‑standard rhombic geometry, size 06
• Uncoated cemented carbide for low cutting forces
• 7° clearance angle for reduced rubbing
• Single‑sided chipbreaker for clean chip formation

Low cutting forces and improved surface quality for finishing cuts

The uncoated cemented carbide grade TH10 is designed to provide a sharp, universal cutting edge that reduces cutting forces and supports a cleaner surface finish in non‑ferrous machining and other suitable applications. The combination of a fine 0.2 mm corner radius and a single‑sided chipbreaker reduces push‑off and smearing on softer materials, which is especially useful in finishing passes. For customers less familiar with insert geometry: a smaller nose radius gives finer contours and lower cutting loads, while the chipbreaker helps control swarf and maintain consistent surface condition.

Compatibility and mounting: how the insert fits into the system

Compatibility with a toolholder depends on several matching parameters: the insert’s form, clearance angle (7°), tolerance class, attachment style, size (06) and thickness (2.38 mm). The CCGT shape accepts a cylindrical locating hole with a one‑sided countersink (40°–60°) for positive clamping stability. When assembling the system, ensure the holder accepts an ISO‑type rhombic insert with a central hole and the specified seating geometry; correct matching prevents edge chipping and keeps tool life predictable.

Practical benefits in process planning and tool choice

The compact rhombic form and modest insert thickness allow close control of radial engagement, making this insert a practical choice for both external and internal turning where access is limited. The TH10 uncoated grade favours applications that benefit from a sharp edge and reduced built‑up edge formation; this often translates into longer intervals between final touch‑ups and more consistent part quality. In production planning, select a chipbreaker and insert grade that correspond to workpiece material, cut depth and machine rigidity to balance productivity and surface tolerance.

Selecting the right insert for the workpiece and machining strategy

For non‑ferrous alloys and applications requiring low cutting pressure, the uncoated grade is advantageous because coatings can blunt the initial edge geometry and increase cutting force under some conditions. The 80° included angle and rhombic shape provide versatility: a stable cutting attitude with options to index for multiple edges. Where higher mechanical or thermal loads are present, consider alternative grades or geometries; for light finishing and precision turning, this style of insert offers an efficient and reliable solution.

Contact Metav Werkzeuge for tailored recommendations on using Tungaloy turning inserts — our consultants can confirm holder compatibility and suggest feeds and speeds; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice

Technical data

• Article number: 6801278
• SKU: 6801278-Tungaloy
• Manufacturer SKU: TUN6801278
• Manufacturer article number: 6801278
• Model series: ISO‑Drehwendeschneidplatten
• Label: CCGT060202 TH10 Tungaloy‑Wendeplatte

Core specifications

• Insert designation: CCGT060202
• Size: 06
• Corner radius: 0.2 mm
• Thickness: 2.38 mm
• Clearance angle: 7°
• Included angle: 80°

Materials & special features

• Material: uncoated cemented carbide (TH10)
• Shape: rhombic
• Hole: cylindrical hole with one‑side countersink (40°–60°)
• Chipbreaker: single‑sided
• Application: turning (external and internal)
• System note: ISO‑type insert — compatibility based on form, clearance, tolerance, attachment, size and thickness

FAQ

What materials is this insert intended for?
The CCGT060202 TH10 Tungaloy insert is optimised for non‑ferrous alloys and applications where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish.

How does the 0.2 mm nose radius affect the workpiece?
A 0.2 mm corner radius on the Tungaloy insert gives finer surface contours and lower cutting loads, making it well suited to finishing passes and delicate profiles.

Which holders are compatible with this ISO insert?
Holders designed for ISO CCGT inserts with a size 06 seat, 2.38 mm thickness and a central locating hole with countersink will be compatible; ensure the holder matches the 7° clearance angle and tolerance class.

Can this insert be used for roughing operations?
The uncoated TH10 grade and small radius are primarily intended for low‑force finishing; for heavy roughing, a tougher geometry or a coated, wear‑resistant grade is recommended instead of this insert.

What is the purpose of the single‑sided chipbreaker?
The single‑sided chipbreaker on the insert helps form and control chips during turning, leading to more consistent swarf removal and improved surface quality on softer materials.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.