CCGT 060202 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of ISO compatibility, a sharp uncoated carbide TH10 grade and a compact 0.2 mm corner radius for precise, low-force turning of non-ferrous parts; order the insert directly via Metav Werkzeuge or consult our specialists for application advice.

CCGT 060202 TH10 ISO turning insert for turning — Tungaloy

The CCGT060202 TH10 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a sharp uncoated carbide edge optimised for non‑ferrous materials and low cutting forces.

• ISO‑standard indexable geometry
• Uncoated carbide for low cutting forces
• Rhombic 80° insert with 0.2 mm radius
• Single‑sided chipbreaker, with hole

Precise cutting with a sharp uncoated grade for cleaner surfaces

The insert is manufactured in an uncoated carbide composition and the TH10 grade targets tasks where a sharp edge and low cutting forces improve surface quality, particularly on aluminium and other non‑ferrous materials. An uncoated cutting edge reduces built‑up edge and supports fine finishing passes; at the same time the 0.2 mm corner radius balances edge strength with the ability to obtain tight profiles. For customers seeking predictable surface finish and minimal burr formation, this specification gives a measurable advantage in cycle‑time reduction and downstream processing.

Predictable fit in ISO tool systems improves shop flexibility

As an ISO‑standard insert, compatibility depends on the insert’s form, 7° relief angle, tolerance class, fixation, size and thickness. The rhombic geometry with an 80° included angle ensures secure seating in a wide range of external holders and boring bars, simplifying inventory and changeovers. Because the system approach uses standardised dimensions, the insert enables fast replacement and repeatable positioning, which supports lean workflows and reduces machine downtime during tool swaps.

Practical features that boost productivity in turning operations

The insert’s single‑sided chipbreaker is intended to control chip form for turning and to suit typical feed ranges in general turning tasks. A cylindrical hole with a one‑sided countersink (40°–60°) allows secure clamping and stable heat dissipation at the cutting edge. With a plate thickness of 2.38 mm and size designation 06, the geometry supports both finish and light to medium roughing operations when matched with an appropriate holder and cutting parameters. For best results, select the chipbreaker and grade to match workpiece material and machine rigidity.

For ordering and tailored recommendations on Tungaloy TH10 turning inserts contact Metav Werkzeuge for availability and application guidance: info@metav-werkzeuge.com • +49 2822 7131930

Technical data

• Article number: 6801286
• SKU: 6801286-Tungaloy
• Manufacturer SKU: TUN6801286
• Model series: ISO-Drehwendeschneidplatten
• Label: CCGT060202 TH10 Tungaloy‑Wendeplatte
• Designation: CCGT060202
• Grade: TH10
• Material: Hartmetall
• Manufacturer: Tungaloy

Facts

• Corner radius: 0.2 mm
• Relief angle: 7°
• Included angle: 80°
• Thickness: 2.38 mm
• Size: 06
• Hole style: cylindrical hole + one‑sided countersink (40°–60°)

Design and special features

• Rhombic insert geometry
• Uncoated cemented carbide cutting edge
• Single‑sided chipbreaker
• ISO‑standard indexable insert
• Cylindrical hole with 40°–60° countersink
• Compatible with external holders and boring bars
• Suited to external and internal turning; choose chipbreaker and grade to match material

FAQ

What materials is this insert best suited for?
The TH10 uncoated grade is optimised for non‑ferrous materials; the CCGT060202 TH10 insert provides low cutting forces and clean surfaces on aluminium and similar alloys.

Is this insert compatible with standard ISO tool holders?
Yes, the insert follows ISO geometry; compatibility is determined by form, relief angle (7°), tolerance class, fixation, size and thickness, so it seats reliably in ISO‑compliant external holders and boring bars.

Which chipbreaker should be chosen for finishing vs roughing?
For finishing, select the single‑sided chipbreaker that favours tight chip control and surface finish; for heavier cuts, a more robust chipbreaker and suitable feeds should be used to maintain edge life.

How does the 0.2 mm corner radius affect performance?
A 0.2 mm radius offers a compromise between edge strength and ability to produce sharp contours; it helps reduce stress concentration while allowing high‑quality surface finishes in finishing passes.

What does the hole and countersink design provide?
The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and accurate seating, improving repeatability and stability during turning operations.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.