CCGT 060204 TH10 Wendeplatten - Tungaloy

Take advantage of the ISO compatibility, low cutting forces of the TH10 grade and the fine 0.4 mm corner radius for consistent finishing and productive turning cycles. Order the CCGT060204 TH10 Tungaloy insert directly via Metav Werkzeuge or consult our specialists for application matching.

CCGT060204 TH10 indexable turning insert — Tungaloy

CCGT060204 TH10 is an ISO-standard rhombic indexable insert designed for external and internal turning, optimised for non-ferrous materials and low-force finishing applications.

• ISO-standard rhombic geometry
• TH10 uncoated carbide for non-ferrous metals
• 0.4 mm corner radius for fine surface finish
• Cylindrical hole with 40°–60° countersink

Consistent cutting performance for non-ferrous turning

The ISO design and the TH10 uncoated carbide grade deliver reliably low cutting forces and clean surfaces when machining aluminium and other non-ferrous materials. The rhombic geometry and the 0.4 mm corner radius support fine finishing passes while maintaining stable chip formation. For production environments where surface integrity and repeatability matter, this combination reduces rework and helps to preserve tool life under suitable cutting conditions.

Clear compatibility and reliable clamping for safe operation

Compatibility with toolholders is determined by shape, clearance angle, tolerance class, clamping method, size and thickness. The insert is supplied with a cylindrical centre hole and a single-sided countersink (40°–60°), enabling secure mounting in ISO holders that accept CCGT-type plates. The 7° clearance angle and 2.38 mm plate thickness are part of the specification to check when selecting a matched holder to ensure correct seating and repeatable cutting geometry.

Practical advantages of an uncoated carbide grade

An uncoated carbide microstructure in the TH10 grade keeps the cutting edge sharp and reduces the tendency to build up material when machining soft, gummy alloys. The absence of a coating lowers cutting temperatures and cutting forces in certain non-ferrous applications, which supports improved surface finish and helps to avoid smearing on the workpiece. Where abrasion resistance is less critical than edge sharpness, this grade offers an efficient solution.

How to select the right chipbreaker and application set-up

The insert is fitted with a single-sided chipbreaker; select the chipbreaker and grade based on the workpiece material, depth of cut and machine rigidity. For high-feed finishing choose small depths with fine edge radii, while for roughing larger depths and appropriate feed rates are advised. If uncertain about the optimal setup, request cutting data for similar alloys and the recommended feeds and speeds to align process stability with productivity.

For precise non-ferrous turning with a sharp, low-force cutting edge, request the Tungaloy CCGT060204 TH10 insert from Metav Werkzeuge — quote SKU TUN6801303 for exact identification and technical matching, or contact info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice

Technical Data

• Article number: 6801303
• Manufacturer SKU: TUN6801303
• Vendor SKU: 6801303-Tungaloy
• Model series: ISO turning indexable inserts

Facts

• Corner radius: 0.4 mm
• Included angle: 80°
• Clearance angle: 7°
• Plate thickness: 2.38 mm
• Plate size: 06
• ISO designation: 060204

Special features

• Carbide, uncoated
• Grade TH10
• Single-sided chipbreaker
• Cylindrical hole with single-sided countersink (40°–60°)
• Rhombic plate form (CCGT)
• ISO-standardised turning insert
• Application: external and internal turning, non-ferrous materials
• Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness

FAQ

What materials is this insert suitable for?
The CCGT060204 TH10 insert is optimised for non-ferrous materials; the TH10 uncoated carbide grade promotes sharp cutting and clean surfaces when turning aluminium and similar alloys.

How is the insert secured in the holder?
The insert features a cylindrical centre hole with a single-sided countersink (40°–60°) and requires an ISO-compatible holder that matches the plate form, thickness (2.38 mm) and clamping arrangement.

What edge preparation does the insert have?
This indexable insert has a 0.4 mm corner radius and a 7° clearance angle, designed to support fine finishing cuts and reduce surface smearing in soft metals.

Is the CCGT060204 TH10 suitable for internal as well as external turning?
Yes, the ISO rhombic geometry and standard mounting allow use for both external and internal turning operations when paired with the correct holder and process parameters.

Which SKU should be referenced when ordering?
Use SKU TUN6801303 or vendor SKU 6801303-Tungaloy to ensure the correct TH10 CCGT060204 turning insert is supplied.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.