CCGT 09T301 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of ISO compatibility, a TH10 uncoated carbide grade and a precise 0.1 mm corner radius for efficient, low‑force turning and consistent surface finish; order the insert directly via Metav Werkzeuge or consult our technical advisors for application advice.

CCGT 09T301 TH10 rhombic turning insert by Tungaloy — ISO turning insert, 0.1 mm radius, with hole

The CCGT09T301 TH10 is an ISO‑standard rhombic insert designed for external and internal turning, offering a sharp, uncoated carbide cutting edge optimised for non‑ferrous materials and applications requiring low cutting forces

• ISO‑standard rhombic insert for turning
• TH10 uncoated carbide for non‑ferrous materials
• 0.1 mm corner radius for precise finishes
• Cylindrical hole with single‑side countersink

Increased productivity through sharp, low‑force cutting

The combination of the TH10 grade and uncoated carbide provides a cutting edge that promotes low cutting forces and clean surface finishes when machining softer, non‑ferrous materials. This results in reduced spindle load and shorter cycle times for operations where minimised cutting resistance is essential. The ISO conformity also reduces setup time by ensuring predictable seating and orientation in common clamping systems. The principal benefit here is enhanced throughput with reliable surface quality.

Predictable surface finish and tool life from controlled geometry

A 0.1 mm corner radius paired with a 7° relief angle and the rhombic geometry delivers consistent engagement with the workpiece, reducing the risk of chatter and minimising distortion at the cut edge. The single‑sided chipbreaker helps to control chip shape in typical turning conditions, improving surface finish and easing chip evacuation. The direct benefit is greater dimensional stability and repeatability across medium‑run production, especially when frequent insert indexing is required.

Simple mounting and secure clamping for less downtime

Built as an ISO‑compatible insert with a cylindrical hole and single‑side countersink, the design ensures straightforward clamping in matched holders and stable seating during heavy and light cuts alike. Compatibility depends on form, relief angle, tolerance class, fixing and thickness, so using standardised holders and replacement screws in a consistent system reduces setup errors and machine downtime. The practical advantage is faster changeovers and more predictable fixture behaviour.

Application guidance for reliable results

This indexable insert is optimised for general turning of non‑ferrous alloys and situations where a sharp, uncoated cutting edge improves finish or reduces cutting forces. The insert performs best in external and internal turning when paired with a holder that matches the plate form and tolerance class. For mixed material shops, select the chipbreaker and grade according to workpiece stability and desired surface. The CCGT09T301 should be replaced or re‑indexed at the first signs of edge chipping or progressive wear to maintain part quality and process stability.

Contact Metav Werkzeuge for tailored application support or order the Tungaloy CCGT09T301 via Metav Werkzeuge — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930

Technical data

• Article number: 6801313
• SKU: 6801313-Tungaloy
• Manufacturer SKU: TUN6801313
• Model series: ISO‑Drehwendeschneidplatten
• Material: Carbide

Facts

• Corner radius: 0.1 mm
• Plate thickness: 3.97 mm
• Plate size: 09
• Relief angle: 7°
• Insert angle: 80°

Special features

• ISO turning insert, rhombic form
• Grade: TH10 (uncoated)
• Single‑sided chipbreaker
• Cylindrical hole with single‑side countersink (40°–60°)
• With hole for stable clamping

FAQ

What materials is this insert suited for?
The TH10 uncoated carbide grade of the CCGT09T301 insert is intended primarily for non‑ferrous materials and applications where a sharp, low‑force cutting edge yields the best surface finish.

Can this insert be used for both external and internal turning?
Yes; the insert is designed for both external and internal turning operations when mounted in a compatible ISO holder matched by form, size and tolerance.

How does the 0.1 mm corner radius affect the finish?
A 0.1 mm corner radius gives a fine, consistent finish while maintaining edge strength; this reduces the likelihood of small burrs on softer materials and improves dimensional accuracy.

What does the hole and countersink style mean for clamping?
The cylindrical hole with a single‑side countersink (40°–60°) ensures central and secure clamping in compatible holder designs, improving repeatability and reducing the risk of insert movement under load.

Is the insert coated, and what does that imply for cutting conditions?
This insert is uncoated (TH10) which supports a very sharp cutting edge; it is best used where low cutting forces and clean surfaces are required rather than high‑temperature or heavy interrupted cuts.

How should wear be monitored for this insert?
Monitor for edge chipping, increased cutting forces or deteriorating surface finish; index or replace the insert at the first signs of progressive wear to maintain process stability and part quality.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.