CCGW 09T304 TH10 Wendeplatten - Tungaloy

Combining the sharp TH10 grade, ISO compatibility and robust carbide construction ensures low cutting forces and clean surface finishes in turning operations; order the CCGW09T304 TH10 directly via Metav Werkzeuge or consult our advisors for application support.

CCGW 09T304 TH10 — ISO rhombic turning indexable insert by Tungaloy

A CCGW09T304 TH10 indexable turning insert designed for external and internal turning, offering a sharp universal grade optimised for non‑ferrous materials and low‑force machining.

• ISO‑standard rhombic insert, 80° included angle
• Sharp TH10 grade for low cutting forces
• Uncoated carbide for clean surface finish
• 0.4 mm corner radius, with cylindrical hole

High‑efficiency turning with a low‑force edge

The CCGW09T304 TH10 is engineered as a high‑efficiency indexable insert for turning applications where reduced cutting forces and superior finish matter. Its uncoated carbide composition and the sharp TH10 grade combine to lower power draw and produce clean surface finishes on non‑ferrous and soft alloys. This configuration reduces the risk of built‑up edge, which in turn lowers rework and enhances throughput—an economic advantage in both small‑batch and serial production.

Predictable fit and straightforward holder compatibility

Supplied to ISO geometry, the insert offers predictable interchangeability across standard holders; compatibility depends on form, relief angle (7°), tolerance class, mounting method, size and thickness. Clear specification of these parameters simplifies tool selection and reduces downtime when replacing inserts. The 80° included angle and rhombic form allow stable engagement in shoulder and profiling operations, contributing to reproducible process results and easier set‑up in mixed‑machine environments.

Application guidance and material suitability

The sharp universal grade is particularly suited to non‑ferrous materials and operations that benefit from a clean, uncoated cutting edge. As the insert is without a chipbreaker, chip formation must be managed through appropriate feeds, speeds and coolant strategy; this provides flexibility to tune chip form for specific alloys and toolpaths. Where controlled chipbreaking is required, pairing with a suitable geometry or alternate grade is recommended to maintain productivity without sacrificing surface quality.

Secure clamping and stable cutting performance

Mechanical design features such as the cylindrical hole with single‑side countersink (40°–60°) deliver reliable clamping in compatible holders, while the 0.4 mm corner radius reduces edge stress and improves resistance to chipping during interrupted cuts. With a plate thickness of 3.97 mm and the ISO rhombic format, the insert provides a balance between rigidity and accessibility for close‑tolerance turning. The system concept typically includes a matching outer holder or boring bar, a seating pad/clamping set and replacement screws to ensure consistent seating and repeatable results.

For reliable, low‑force turning with Tungaloy quality, contact Metav Werkzeuge for availability and tailored machining advice at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6801364-Tungaloy
• Manufacturer SKU: TUN6801364
• Manufacturer article number: 6801364
• Model series: ISO turning inserts
• Material: carbide
• Brand: Tungaloy

Facts

• Corner radius: 0.4 mm
• Included angle: 80°
• Relief angle: 7°
• Plate thickness: 3.97 mm
• Size designation: 09
• SKU: 6801364-Tungaloy

Special features

• Uncoated carbide grade TH10
• Rhombic plate form (CCGW)
• With hole; cylindrical + single‑side countersink (40°–60°)
• No chipbreaker
• For external and internal turning
• Compatible with ISO holders; check form and tolerance

FAQ

Which materials are best suited to this insert?
The CCGW09T304 TH10 insert is optimised for non‑ferrous materials and soft alloys; the uncoated carbide and sharp TH10 grade support low cutting forces and clean surfaces in these applications.

How does the TH10 grade affect machining compared with coated grades?
TH10 is an uncoated, sharp universal grade that reduces cutting forces and helps prevent built‑up edge; compared with coated grades it often gives better surface finish on non‑ferrous materials but may require careful parameter selection for high‑speed or abrasive applications.

What must be checked for holder compatibility?
Compatibility requires matching the insert form, relief angle (7°), tolerance class, mounting method, size (09) and thickness (3.97 mm); confirm these dimensions against the chosen ISO holder or boring bar before assembly.

Does the insert include a chipbreaker?
This variant is supplied without a chipbreaker, so chip control should be managed via cutting parameters, coolant and toolpath strategy to achieve the desired chip form and surface quality.

How does the clamping design contribute to performance?
The cylindrical hole with single‑side countersink (40°–60°) provides secure seating and repeatable clamping force, while the 0.4 mm corner radius helps reduce edge chipping during interrupted cuts.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.