CPGT 080204 TH10 Wendeplatten - Tungaloy

Optimise turning operations by combining a sharp, uncoated carbide cutting edge with ISO conformity for consistent seating and reliable chip control. The rhombic geometry and secure clamping features support efficient changeover and stable machining — order the CPGT 080204 TH10 directly via Metav Werkzeuge or ask our consultants if needed.

CPGT 080204 TH10 ISO turning insert for turning — Tungaloy

CPGT 080204 TH10 is a rhombic ISO-standard turning insert designed for external and internal turning, offering an uncoated carbide edge for low cutting forces and clean surface finishes.

• Rhombic ISO shape, 80° included angle
• Uncoated carbide TH10 for low cutting forces
• Single-sided chipbreaker for predictable chips
• Cylindrical fixing hole with countersink

Predictable performance through ISO conformity and fit

The ISO-series design ensures reproducible seating and interchangeability across compatible holders: compatibility depends on form, relief angle, tolerance class, fastening, size and thickness, which together allow consistent clamping and machining outcomes. With an 80° included angle and an 11° relief, the geometry promotes stable engagement during both light finishing and general turning operations. This controlled interface reduces unexpected tool movement and contributes to predictable part quality over repeated insert changes.

Sharp universal grade for non‑ferrous work and low cutting forces

The grade TH10 is an uncoated carbide chosen for applications that benefit from a sharp edge and low cutting resistance, notably non‑ferrous materials and situations where surface integrity is critical. The combination of a sharp cutting edge and the single‑sided chipbreaker helps to produce clean surfaces while lowering the tendency for built‑up edge. For workshops focused on aluminium, copper alloys and similar materials, this specification supports higher material removal rates with improved finish compared with dulled or heavily coated grades.

Geometry and fixation that reduce setup time and enhance stability

The rhombic plate with a 0.4 mm corner radius and 2.38 mm thickness is designed for secure clamping and versatile application. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) to match standard clamping hardware, improving repeatability at each tool change. These design details - from the rhombic form to the precise hole style - assist in uniform chip formation and minimise vibration, thereby extending effective tool life and reducing secondary operations.

System advice: choosing chipformers and holders for best results

As part of a complete system, the insert works in concert with a matching external holder or boring bar, plus the required underlay/shim, clamp set and replacement screws. Selecting the appropriate chipbreaker and grade in line with workpiece material and machine-tool rigidity is essential for optimised productivity. For less rigid setups, favour lighter cut depths and a chipformer that promotes breakage; for stable, heavy cuts, the same insert can offer extended life when paired with a robust clamping system.

Contact Metav Werkzeuge for application recommendations and to order genuine Tungaloy CPGT 080204 TH10 turning inserts; technical queries by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930

Technical Data

• Article number: 6802393
• Manufacturer SKU: TUN6802393
• SKU: 6802393-Tungaloy
• Model series: ISO-Drehwendeschneidplatten
• Product label: CPGT080204 TH10 Tungaloy-Wendeplatte

Facts

• Included angle: 80°
• Relief angle: 11°
• Thickness: 2.38 mm
• Corner radius: 0.4 mm
• Size: 08

Special features

• Material: carbide
• Grade: TH10 (uncoated carbide)
• Plate form: rhombic
• Hole: with hole
• Hole style: cylindrical hole + single-sided countersink (40°–60°)
• Chipbreaker: single-sided
• Application: turning
• System components: ISO insert, matching external holder or boring bar, underlay/shim, clamp set and replacement screws
• Compatibility determined by form, relief, tolerance class, fastening, size and thickness

FAQ

What materials is the CPGT 080204 TH10 best suited for?
The CPGT 080204 TH10 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated carbide edge promotes low cutting forces and a clean surface finish.

How does the insert clamp into existing holders?
Clamping depends on the ISO geometry and the insert’s cylindrical hole with countersink; compatibility is achieved when the holder matches the insert’s form, relief angle, tolerance class, fastening method, size and thickness.

What chip control can be expected with this insert?
Thanks to the single‑sided chipbreaker and rhombic geometry, the insert produces predictable chipforms that support continuous machining and reduce interruptions for chip handling.

Is the CPGT 080204 TH10 suitable for both external and internal turning?
Yes, the CPGT 080204 TH10 is designed for external and internal turning, offering consistent performance when paired with the correct external holder or boring bar.

Which SKU should be referenced when ordering?
Reference SKU 6802393-Tungaloy or manufacturer SKU TUN6802393 when enquiring to ensure the correct ISO insert and grade are supplied.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.