CPMW 06T208 GH330 Wendeplatten - Tungaloy

Take advantage of the combination of GH330 wear resistance, a 0.8 mm corner radius and secure clamping for continuous milling productivity — order directly via Metav Werkzeuge or request technical advice from our consultants.

CPMW 06T208 GH330 Indexable Milling Insert for Milling – Tungaloy

The CPMW06T208 GH330 is a rhombic indexable insert designed for face, shoulder, slot, high-feed and contour milling in compatible Tungaloy systems.

• GH330 grade: wear resistance and toughness
• Rhombic 06 form, 80° cutting angle
• 0.8 mm corner radius for robust edge
• Countersunk hole for secure clamping

Consistent cutting performance through optimised grade and edge geometry

The combination of the GH330 carbide grade and the insert geometry delivers a balance of wear resistance and edge stability that is intended to extend in‑service life while maintaining surface quality. The moderate corner radius of 0.8 mm and the 80° cutting angle increase mechanical strength at the cutting edge, which reduces the risk of premature chipping during interrupted cuts. This results in fewer tool changes and a more continuous production flow, a tangible benefit for shops pursuing higher uptime and reliable batch processing.

Secure fixture and system compatibility for vibration‑reduced machining

Designed as part of a Tungaloy milling system, the insert requires a matching plate seat, geometry and cutter body; correct matching is essential and improves process reliability. The insert features a countersunk hole with a cylindrical bore and a one‑side countersink (40°–60°), combined with a 2.78 mm thickness and rhombic 06 form, which together ensure stable clamping and reduced micro‑movement. A defined 11° clearance angle helps to prevent rubbing and to preserve the cutting edge. These mechanical decisions are made to lower vibration, enhance surface finish and support higher feeds where the tooling permits.

Versatile application spectrum and practical handling details

The insert suits a range of milling operations — planing, shoulder milling, slotting, high‑feed strategies and contouring — depending on the selected cutter family. It is supplied without a chipbreaker, which makes the geometry particularly appropriate for applications where an open cutting edge is required or where the cutter body provides chip control. For users less familiar with chipbreaker concepts: a chipbreaker is a micro‑geometry that assists in fragmenting and evacuating chips; its absence here implies that chip control is achieved at the toolbody level or in processes favouring continuous chips. The robust carbide construction supports consistent performance across repetitive cycles and contributes to lower total machining costs through reduced rework.

Contact Metav Werkzeuge to specify the Tungaloy GH330 CPMW06T208 insert for robust milling setups and to request tailored application advice from our technical team.

Technical data

• Article number: 6802449
• Manufacturer SKU: TUN6802449
• Retail SKU: 6802449-Tungaloy
• Model series: Fräswendeschneidplatten

Facts

• Corner radius: 0.8 mm
• Cutting angle: 80°
• Clearance angle: 11°
• Thickness: 2.78 mm
• Size: 06

Special features

• Grade: GH330
• Material: carbide
• Form: rhombic
• Hole: with hole
• Hole style: cylindrical hole + one‑side countersink (40°–60°)
• Chipbreaker: none
• Typical use: milling (face, shoulder, slot, high‑feed, contour)

FAQ

What milling operations is this insert suitable for?
The insert is intended for face, shoulder, slot, high‑feed and contour milling; the exact suitability depends on the chosen cutter body and tool family for the CPMW06T208 GH330.

Does the insert require a special clamping system?
A matching Tungaloy cutter body and correct plate seat are required; the CPMW06T208 features a countersunk hole and cylindrical bore for secure clamping.

Is a chipbreaker integrated in this geometry?
No, the CPMW06T208 GH330 is supplied without a chipbreaker, so chip control is expected to be provided by the cutter body or machining strategy.

What are the key dimensions to check when replacing inserts?
Check corner radius (0.8 mm), thickness (2.78 mm), size (06), cutting angle (80°) and the hole/countersink configuration to ensure compatibility with the cutter body.

Which material is the insert made from and what does the grade offer?
The insert is made from carbide with the GH330 grade, chosen to combine wear resistance, toughness and stable cutting edge behaviour for general milling tasks.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.