DCGT 070202 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of uncoated carbide performance, rhombic 07 geometry and a fine 0.2 mm nose radius for reliable turning results; order the insert directly via Metav Werkzeuge or consult our advisers for application-specific selection.

DCGT 070202 TH10 ISO turning insert — Tungaloy, uncoated carbide, rhombic 07

A DCGT070202 TH10 insert designed for ISO‑standard turning operations, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finish.

• Uncoated carbide for low cutting forces
• Rhombic 07 geometry, 55° cutting angle
• Single-sided chipbreaker, cylindrical hole
• ISO-standard insert for precise holder fit

Higher machining efficiency for non‑ferrous turning

The uncoated TH10 carbide grade provides a sharp, low‑friction cutting edge that reduces cutting forces and improves surface quality when machining aluminium, copper alloys and other non‑ferrous materials. With a 0.2 mm nose radius and a 55° approach angle, the geometry supports stable chip formation and consistent finishes on both external and internal turns. The carded combination of geometry and grade yields measurable gains in cycle time when matched to a suitable holder and stable set‑up, making the insert a pragmatic choice for production and repair work alike.

Secure clamping and dependable chip control

Designed as an ISO‑standard indexable insert, the rhombic 07 form and a 2.38 mm plate thickness ensure compatibility with a broad range of external holders and boring bars. The insert features a cylindrical hole with a single‑sided countersink (40°–60°) for positive locate and repeatable clamping; this reduces chatter and improves dimensional stability in interrupted cuts. The single‑sided chipbreaker is tuned for one‑pass chip control on non‑ferrous alloys, simplifying disposal and protecting the workpiece from edge marks.

Practical selection and predictable tool life

When selecting tooling for turning applications, align the chipbreaker type and the TH10 grade with component rigidity and required surface finish. The uncoated grade performs best where a clean edge is preferable and where coating adhesion is unnecessary; in such cases, toolholders can be changed quickly while retaining repeatable accuracy. The insert is suitable for both external and internal turning tasks; choosing the correct holder geometries and clearance angles will extend service life and lower machining costs, delivering a clear cost‑benefit in continuous production environments.

Contact Metav Werkzeuge for application support or to request the TUN6802795 item — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply

Technical data

• Article number: 6802795
• Manufacturer article number: 6802795
• SKU: 6802795-Tungaloy
• Manufacturer SKU: TUN6802795
• Manufacturer: Tungaloy

Core specifications

• Radius: 0.2 mm
• Cutting angle: 55°
• Relief angle: 7°
• Plate thickness: 2.38 mm
• Plate size: 07
• Plate form: rhombic
• Hole: cylindrical hole + single-sided countersink (40°–60°)
• Chipbreaker: single-sided

Materials & features

• Material: carbide
• Grade/coating: TH10 (uncoated)
• Application: turning (external and internal)
• Typical system: ISO insert with matching external holder or boring bar
• Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness

FAQ

What materials is this insert suitable for?
The DCGT070202 TH10 insert is intended primarily for non‑ferrous materials such as aluminium and copper alloys, where the uncoated TH10 carbide grade gives low cutting forces and clean surfaces.

How is the insert mounted in a holder?
Mounting requires the appropriate ISO‑compatible holder or boring bar; the DCGT070202 uses a cylindrical hole with a single‑sided countersink to ensure secure, repeatable clamping.

What does the TH10 designation indicate?
TH10 denotes an uncoated universal carbide grade from Tungaloy designed to provide a sharp cutting edge and broad applicability for non‑ferrous machining.

What are the key geometry values to note?
Important values are the 0.2 mm nose radius, 7° relief angle and the 55° approach angle, which together influence chip formation and surface finish.

Is this an ISO‑standardised insert?
Yes, the insert conforms to ISO dimensions for interchangeability with matching ISO holders; the model series is ISO‑turning indexable inserts.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.