DCGT 11T304 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of ISO compatibility, the TH10 uncoated carbide grade and a 0.4 mm corner radius for precise, low‑force turning of non‑ferrous parts; order directly via Metav Werkzeuge or ask our consultants for holder recommendations.

DCGT11T304 TH10 ISO turning insert (uncoated carbide, 0.4 mm corner radius) – Tungaloy

A DCGT11T304 TH10 is an ISO‑standard rhombic turning insert designed for external and internal turning, particularly for non‑ferrous materials and operations requiring low cutting forces

• ISO rhombic insert, 55° cutting angle
• Uncoated carbide grade TH10 for clean cuts
• 0.4 mm corner radius for precision profiles
• Cylindrical hole with single‑side chipbreaker

Reliable seating and clear compatibility reduce setup time

The ISO‑standard format ensures the insert seats predictably in standard holders; compatibility is determined by form, clearance, tolerance class, fastening and plate thickness. The insert is made of uncoated carbide in TH10 grade so it is free of surface coatings that might change clamping behaviour; this supports consistent clamping torque and repeatable tool offsets. Where process stability matters, selecting a holder that matches the insert’s form and the specified 7° relief angle is essential to maintain accurate tool projection and minimise rework.

Lower cutting forces that improve finish and cycle time

Thanks to the sharp universal geometry of this grade, cutting forces are reduced, which supports finer surface quality and less power draw on the machine spindle. The single‑side chipbreaker promotes predictable chip flow for turning operations, helping to avoid entangling swarf and minimising manual intervention. For machining aluminium, copper alloys and other non‑ferrous materials the combination of a sharp edge and the 0.4 mm corner radius yields accurate profiles and consistent edge life, so part tolerances and finishes are achieved more reliably.

Thoughtful configuration keeps production consistent

Select the chipbreaker and grade according to workpiece material, operation type and machine rigidity; the insert’s rhombic shape and 55° cutting angle are suited to both external and internal turning profiles. The plate thickness of 3.97 mm and the cylindrical hole with a single‑side countersink (40°–60°) permit secure fastening with standard clamps and screws in a typical ISO system build‑up (insert, holder, shim, clamp and replacement screws). For repeatable results, inspect seating faces for burrs and verify the tightening torque to maintain process reliability.

For best results with the Tungaloy TH10 insert and to confirm the correct holder combination, contact Metav Werkzeuge for technical guidance and availability: info@metav-werkzeuge.com | +49 2822 7131930.

Technical data

• Article number: 6802844
• Manufacturer SKU: TUN6802844
• Metav SKU: 6802844-Tungaloy

Facts

• Corner radius: 0.4 mm
• Plate thickness: 3.97 mm
• Plate size: 11 mm
• Cutting angle: 55°
• Relief angle: 7°

Special features

• ISO turning insert series
• Rhombic shape
• Uncoated carbide (Hartmetall)
• Grade TH10
• Single‑side chipbreaker
• Cylindrical hole with single‑side countersink (40°–60°)
• Compatible with ISO holders
• Application: turning (external and internal)

FAQ

What materials is the DCGT11T304 TH10 insert intended for?
The DCGT11T304 TH10 insert from Tungaloy is designed primarily for non‑ferrous materials such as aluminium and copper alloys, where its sharp uncoated edge supports low cutting forces and clean surfaces.

How does the single‑side chipbreaker affect machining?
The single‑side chipbreaker on the Tungaloy TH10 geometry helps produce predictable chips and reduces the risk of swarf build‑up, improving surface quality and lowering manual chip handling during turning.

Which holders are compatible with this ISO insert?
Compatibility is determined by the insert form, clearance, tolerance class, fastening, size and thickness; the DCGT11T304 TH10 is intended for standard ISO‑type turning holders that accept rhombic 11‑size plates.

What is the significance of the 0.4 mm corner radius?
A 0.4 mm corner radius balances profile accuracy and edge strength, enabling precise contouring while offering some robustness against minor interruptions in the cut.

Are there any special fastening features to note?
The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), designed for secure clamping with common ISO clamp designs and standard screws.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.