DNGA 150404 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of sharp uncoated carbide cutting edges, ISO conformity and a 0.4 mm corner radius to secure consistent turning results on non‑ferrous materials; order the DNGA150404 TH10 directly via Metav Werkzeuge or request application advice from the consultants.

DNGA 150404 TH10 — ISO rhombic turning insert, uncoated carbide, 0.4 mm radius (Tungaloy)

The DNGA150404 TH10 is an ISO rhombic turning insert intended for external and internal turning, offering a sharp uncoated carbide edge that reduces cutting forces for clean surface finishes on non‑ferrous materials.

• ISO‑standard rhombic insert
• Uncoated carbide TH10 grade
• 0.4 mm corner radius
• Cylindrical hole for secure clamping

Reliable, low‑force cutting for non‑ferrous workpieces

The insert delivers dependable cutting performance through its uncoated carbide grade TH10 and a sharp cutting edge, which together lower cutting forces and help achieve smoother surfaces when machining aluminium, copper and similar alloys. The modest 0.4 mm corner radius provides a balance between edge strength and fine finish, making the component suitable where light to moderate depths of cut are required. This results in reduced vibration and improved dimensional consistency for batch production and one‑off turning alike.

ISO conformity and straightforward system integration

Being an ISO‑designated insert, the rhombic geometry with a 55° included angle ensures compatibility with widely available external holders and boring bars; compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness. The insert’s cylindrical hole and standard thickness of 4.76 mm facilitate secure clamping and fast indexable changes, reducing downtime during tool changes and setup. Clear system integration supports predictable process parameters and simplifies tool inventory management.

Process efficiency without unnecessary coating

The decision for an uncoated cutting edge is deliberate: in many non‑ferrous applications coatings are not required and can increase built‑up edge tendency. The TH10 grade provides a sharp, universal cutting edge that performs well where low cutting forces and clean swarf are priorities. For operations that demand chip control, a suitable chipbreaker and the correct grade should be selected according to workpiece material and machine stability; the present insert is supplied without a chipbreaker to allow flexible pairing with the appropriate holder and mating components.

Practical mounting and selection guidance for stable results

The typical system comprises the ISO insert, a matching external holder or boring bar, a support shim or clamp set and replacement screws. Selection should match insert geometry to the holder and account for machine rigidity, workpiece material and required surface finish. Where component tolerance and repeatability are critical, favour the combination of the ISO standard insert, a firm clamping arrangement and the correct edge preparation to maintain tool life and process stability.

For reliable turning with Tungaloy’s TH10 uncoated carbide technology, contact Metav Werkzeuge for application advice and component matching at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6803157

• SKU: 6803157-Tungaloy

• Manufacturer SKU: TUN6803157

• Name: DNGA150404 TH10 Tungaloy insert

• Brand: Tungaloy

• Application: Turning

Facts

• Insert size: 15 mm

• Thickness: 4.76 mm

• Corner radius: 0.4 mm

• Included angle: 55°

• Clearance angle: 0°

Special features

• Material: carbide (Hartmetall)

• Grade: TH10 (uncoated)

• Shape: rhombic

• Hole: with hole

• Hole style: cylindrical hole

• ISO designation: DNGA150404

FAQ

Which materials are suitable for this insert? The DNGA150404 TH10 insert is optimised for non‑ferrous materials such as aluminium and copper alloys; the uncoated TH10 grade supports low cutting forces and clean finishes.

Is the insert compatible with standard ISO holders? Yes, the ISO rhombic form of the DNGA150404 TH10 ensures compatibility with holders designed for DNGA‑type inserts, subject to matching form, tolerance class, clamping method, size and thickness.

Does the insert include a chipbreaker? The DNGA150404 TH10 is supplied without a chipbreaker; chip control should be achieved by selecting a suitable chipbreaker in combination with the chosen holder and machining parameters.

What is the recommended edge radius for finishing operations? With a 0.4 mm corner radius the insert offers a compromise between edge strength and surface finish; for very fine finishing tasks a smaller radius or a ground edge on a dedicated finishing insert may be preferable.

How is the insert clamped in the holder? Clamping relies on the insert’s cylindrical hole and the holder’s clamping system; the DNGA150404 TH10 is secured using the corresponding screw, shim or clamp set specified for the holder system.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.