DNGG 150402 TH10 Wendeplatten - Tungaloy

Combine the ISO conformity, a 0.2 mm corner radius and the sharp TH10 uncoated carbide grade to achieve clean surfaces and low cutting forces in non‑ferrous turning; order the DNGG150402-01 TH10 insert directly via Metav Werkzeuge or ask our consultants for application advice.

DNGG 150402 TH10 — DNGG150402-01 ISO turning insert for turning, 0.2 mm radius (Tungaloy)

A DNGG150402-01 TH10 turning insert for ISO-compatible toolholders, designed for external and internal turning of non‑ferrous materials

• ISO-standard rhombic insert
• Uncoated carbide TH10 grade
• 0.2 mm corner radius for fine finishes
• Rhombic 55° geometry for versatile turning

Delivering consistent finishes on non‑ferrous materials

The insert is built from carbide and specified in the TH10 grade, an uncoated, sharp universal option that reduces cutting forces and promotes clean surface quality when machining non‑ferrous workpieces. This geometry and grade combination means lower power draw for lightweight alloys and improved surface integrity, which is especially relevant in serial production where consistent finish and reduced rework directly affect throughput and cost‑efficiency. As an ISO‑standard indexable plate, the item supports predictable tool life and repeatability on compatible toolholders.

Secure seating and predictable repeatability in the toolroom

The rhombic 55° plate form and the central cylindrical hole facilitate stable clamping and simple indexability, while the specified 0° relief angle and plate thickness (4.76 mm) contribute to rigidity in the cutting zone. Compatibility with a holder is determined by plate shape, relief angle, tolerance class, clamping method, size and thickness; matching these parameters ensures reliable seating, reduced vibration and repeatable component geometry. Where process stability is required, this insert geometry enables straightforward set‑up on ISO toolholders and boring bars.

Economical machining through fewer tool changes

A 0.2 mm corner radius provides a balance between edge strength and fine edge engagement, delivering improved surface finish without excessive cutting forces. The indexable design permits rotation to fresh cutting edges, extending effective tool life and cutting cost per part. Selecting a sharp, uncoated grade like TH10 for non‑ferrous materials avoids built‑up edge and supports stable chip formation, which together reduce frequency of tool change and increase productive cutting time on the shop floor.

Practical notes for system assembly and application choice

This ISO turning insert integrates into a typical system comprising an ISO‑compatible clamping plate or holder, a matching underlay/clamping kit and replacement screws. Choose the chipbreaker and grade to suit the workpiece material and the machine‑tool stiffness: the TH10 variant is optimised for non‑ferrous materials and light‑cut applications where low cutting forces and clean surfaces are priorities. For external turning and internal operations, verify holder compatibility with the plate dimensions (15 mm), thickness (4.76 mm) and the specified hole style to ensure correct positioning and clamping.

For high‑precision non‑ferrous turning, contact Metav Werkzeuge to secure Tungaloy TH10 DNGG150402‑01 inserts or request tailored tooling recommendations via info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6803190
• Manufacturer SKU: TUN6803190
• Model series: ISO turning indexable inserts
• Type designation: DNGG150402-01
• Manufacturer: Tungaloy
• Material: Carbide
• Grade: TH10 (uncoated)
• Application: Turning

Facts

• Plate size: 15 mm
• Plate thickness: 4.76 mm
• Corner radius: 0.2 mm
• Relief angle: 0°
• Included angle: 55°

Design & special features

• Rhombic plate form
• Cylindrical hole for clamping
• ISO‑standard indexable insert
• Chipbreaker: 01
• Sharp universal grade for non‑ferrous materials
• Compatible with ISO holders depending on shape, relief, tolerance, clamping and thickness

FAQ

What materials is the TH10 grade best suited for? The TH10 uncoated grade is intended for non‑ferrous materials; the DNGG150402‑01 TH10 insert promotes low cutting forces and clean surfaces on alloys such as aluminium and brass.

Can this insert be used for both external and internal turning? Yes, the ISO rhombic geometry of the DNGG150402‑01 makes it suitable for external and internal turning when mounted on an appropriately sized holder or boring bar.

How is compatibility with a toolholder determined? Compatibility depends on plate form, relief angle, tolerance class, attachment method, size and thickness; ensure the holder matches the DNGG150402‑01 dimensions and the 0° relief specification for secure clamping.

What advantage does the uncoated carbide provide? An uncoated carbide edge in TH10 offers a sharp cutting line that reduces cutting forces and minimises built‑up edge on non‑ferrous workpieces, improving surface finish and chip evacuation.

Is the insert indexable and how does that affect productivity? The insert is indexable; rotating to a fresh cutting edge extends usable tool life and reduces tool change frequency, increasing uptime and lowering per‑part tooling cost for repetitive turning tasks.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.