DNGG 150402 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of an uncoated TH10 carbide grade for low cutting forces, a 0.2 mm corner radius for fine finishing, and ISO compatibility to maintain smooth turning operations. Order the DNGG 150402 TH10 directly via Metav Werkzeuge or ask our consultants for application support.

DNGG 150402 TH10 Tungaloy indexable turning insert (rhombic, 55°)

The DNGG 150402 TH10 is an ISO-standard rhombic indexable insert for external and internal turning, optimised for non-ferrous work and applications requiring a sharp, uncoated cutting edge

• ISO-standard rhombic geometry for indexable turning
• Uncoated TH10 carbide for low cutting forces
• 0.2 mm corner radius for fine surface finish
• Central cylindrical hole for secure clamping

Consistent surface quality with an uncoated universal grade

The combination of a TH10 uncoated grade and a deliberately sharp cutting edge provides low cutting forces and a reduced tendency for material build-up when machining non-ferrous components. This characteristic supports a cleaner surface finish and less secondary polishing, which is particularly advantageous in serial production and finishing operations. The uncoated carbide substrate also simplifies reconditioning in certain workflows, while maintaining cutting-edge integrity under stable cutting conditions.

Geometry designed to reduce tool changes and improve process stability

The rhombic shape with a 55° included angle delivers a balance between accessibility and cutting strength, enabling both external and internal turning operations with one insert family. The 0.2 mm corner radius helps achieve fine surface finishes without compromising edge life, so fewer tool changes are required during medium-to-fine turning passes. Clear geometry and standardised dimensions contribute to predictable chip formation and repeatable machining results.

Secure mounting and compatibility with ISO toolholders

Compatibility with the ISO turning system is ensured by standardised form, relief angle and dimensional tolerances; the insert features a cylindrical central hole and a plate thickness of 4.76 mm for robust clamping. The insert integrates into common holder assemblies—outer holder or boring bar—with the expected support components such as a seating pad, clamp set and replacement screws forming the complete system. This standardisation reduces set-up time and simplifies tool inventory management in production environments.

Versatile application strategy for efficient machining

Intended for turning, the insert performs well in both external and internal operations when matched with an appropriate chipbreaker (01) and the correct stability of the tool-holding system. Selecting the right chip control and feed parameters helps exploit the TH10 grade’s strengths: economical material removal with reliable surface results. The design supports productivity-focused shops seeking repeatable outcomes across batches while keeping tool management straightforward.

For stock information and tailored application advice on the Tungaloy DNGG 150402 TH10 indexable insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6803194
• Manufacturer SKU: TUN6803194
• SKU: 6803194-Tungaloy
• Model series: ISO-Drehwendeschneidplatten
• Designation: DNGG150402-01

Facts

• Corner radius: 0.2 mm
• Included angle: 55°
• Relief angle: 0°
• Plate thickness: 4.76 mm
• Plate size: 15 mm
• Chipbreaker: 01

Special features

• Grade: TH10 (uncoated)
• Material: carbide
• Shape: rhombic
• Central cylindrical hole
• Intended application: turning (external and internal)
• ISO-standard indexable insert
• Compatible with standard holders, clamp sets and screws

FAQ

Which materials are best suited to this insert?
The TH10 uncoated grade is optimised for non-ferrous materials; the DNGG 150402 TH10 insert from Tungaloy supports low cutting forces and clean surfaces when machining such alloys.

Can the insert be used for both external and internal turning?
Yes, the ISO rhombic geometry and 55° included angle make the insert suitable for both external and internal turning operations when used with a compatible holder.

How is the insert secured in the toolholder?
The insert features a central cylindrical hole and a 4.76 mm plate thickness; compatibility with the holder depends on form, relief angle, tolerance class, fastening method, size and thickness.

What surface finish can be expected with the 0.2 mm corner radius?
A 0.2 mm corner radius provides fine finishing capability and helps to achieve good surface quality with controlled cutting parameters on appropriate work materials.

What identifiers and article numbers are associated with this part?
The Tungaloy DNGG 150402-01 TH10 insert is listed under article number 6803194 and manufacturer SKU TUN6803194

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.