DNGG 150408 TH10 Wendeplatten - Tungaloy

Combine the uncoated TH10 performance with ISO compatibility and a robust double‑sided geometry for dependable turning operations; order the inserts via Metav Werkzeuge or consult our specialists for application advice.

DNGG150408 TH10 DNGG turning insert for turning — Tungaloy

DNGG150408 TH10 is an ISO‑standard indexable turning insert designed for general turning and fine finishing on non‑ferrous materials and applications that demand low cutting forces.

• ISO rhombic insert, 55° lead angle
• Uncoated TH10 carbide for low cutting forces
• Double‑sided geometry with cylindrical hole
• 15 mm size, 4.76 mm thickness, 0.8 mm radius

Consistent ISO fit for faster tool changeovers

The ISO conformity of this rhombic insert ensures predictable interchangeability between holders from different manufacturers, reducing tool change time and inventory complexity. Compatibility is determined by form, clearance angle, tolerance class, fastening and plate thickness; the DNGG150408 TH10 matches common external and internal turning toolholders, making integration into existing tool assemblies straightforward. Clear identification of form and dimensions supports reliable setup and repeatable process results.

Sharp uncoated TH10 carbide for clean surfaces and low forces

The uncoated TH10 grade is a sharp, universal carbide designed to produce low cutting forces and a clean surface finish, particularly on aluminium, brass and other non‑ferrous alloys. Uncoated carbide minimises built-up edge on soft materials and allows easier regrinding where applicable, translating into reduced machining vibrations and improved surface integrity. For operations prioritising minimal cutting resistance and superior finish, this grade delivers measurable productivity benefits.

Geometry and dimensions that support stability and economy

With a 55° approach angle, 0° clearance face and a rhombic form, the insert offers a balanced cutting action that favours general turning and light finishing cuts. The double‑sided design extends tool life by providing two indexed cutting edges per side, while the cylindrical hole and standard clamping interface deliver secure fastening and straightforward replacement. Key dimensions such as 15 mm overall size, 4.76 mm thickness and 0.8 mm corner radius help define chip flow and edge strength, contributing to consistent component quality and longer intervals between insert changes.

Practical system considerations for workshop efficiency

This insert forms part of a complete turning system: an ISO‑conforming insert, a matching external holder or boring bar, a backing/ clamping kit and replacement screws. Selecting the appropriate TH10 grade and chipbreaker geometry for the workpiece material and machining stability is essential; the double‑sided, uncoated configuration is especially suited to turning where low forces and good surface finish are priorities. Clear labelling and standardised geometry simplify stockkeeping and enable rapid process adjustments on the shop floor.

Contact Metav Werkzeuge for application guidance and availability of genuine Tungaloy TH10 inserts at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6803216
• Manufacturer SKU: TUN6803216
• SKU: 6803216-Tungaloy
• Model series: ISO‑Drehwendeschneidplatten

Facts

• Plate size: 15 mm
• Plate thickness: 4.76 mm
• Corner radius: 0.8 mm
• Lead/approach angle: 55°
• Clearance angle: 0°
• Hole: with cylindrical hole
• Geometry: rhombic, double‑sided

Special features

• Material: carbide (uncoated)
• Grade: TH10
• Application: turning (external and internal)
• Chipbreaker: double‑sided
• System composition: insert + external holder/boring bar + backing/clamping kit + replacement screws
• Compatibility determined by shape, clearance angle, tolerance class, fastening, size and thickness

FAQ

What materials is this insert suitable for?
This insert with TH10 grade is optimised for non‑ferrous materials such as aluminium and brass and for applications that benefit from low cutting forces.

Is the insert coated?
The DNGG150408 TH10 insert is supplied uncoated; the uncoated carbide edge supports low cutting forces and clean surface finish on soft materials.

How is the insert mounted in the toolholder?
Mounting uses the standard ISO rhombic form and a cylindrical hole for clamping; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness.

What are the key dimensions of the insert?
Key dimensions are 15 mm plate size, 4.76 mm thickness and a 0.8 mm corner radius; the approach angle is 55° with a 0° clearance face.

Can the insert be indexed to use multiple cutting edges?
Yes, the double‑sided geometry provides multiple indexed cutting edges to extend usable life and improve cost efficiency.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.