DNMG 150404 TH10 Wendeplatten - Tungaloy

Take advantage of the ISO conformity and the TH10 uncoated carbide grade for reliable turning performance and clean surface finishes; the rhombic DNMG form with a 0° clearance and a 55° cutting angle ensures robust engagement and predictable results in external and internal turning. Order directly via Metav Werkzeuge or contact our consultants for compatibility checks and quick supply.

DNMG150404 TH10 Tungaloy indexable turning insert — rhombic ISO insert for turning with 55° geometry

The DNMG150404 TH10 is an ISO rhombic indexable insert designed for general turning applications, optimised for non-ferrous materials and operations where an uncoated, sharp cutting edge reduces cutting forces and improves surface quality.

• ISO rhombic DNMG form for 55° application
• Sharp uncoated carbide TH10 for low cutting forces
• Double-sided chipbreaker for efficient chip control
• Cylindrical hole for secure mounting

Reliable cutting performance for turning operations

The insert combines an ISO-standard geometry with a sharp TH10 uncoated carbide grade, delivering consistently low cutting forces when machining non-ferrous alloys. The rhombic geometry provides a favourable 55° cutting angle that balances edge strength and surface finish; this makes the component suitable for both external and internal turning. The uncoated carbide edge helps to avoid built-up edge on soft, gummy materials, so the result is cleaner part surfaces and fewer secondary finishing steps.

Predictable chip control and secure clamping

A double-sided chipbreaker on the insert promotes effective chip segmentation, reducing the risk of long, tangled chips in single-pass turning. The insert is produced with a cylindrical hole and a standard clamping interface so that mounting is straightforward and repeatable; compatibility with holders depends on form, clearance, tolerance class, fastening method, size and thickness. The relatively neutral 0° clearance contributes to a robust cutting edge under variable cutting conditions, which supports process stability in less rigid setups.

Practical selection and system compatibility guidance

The insert is part of an ISO turning system consisting of an indexable insert, a matched external holder or boring bar, shim/clamping sets and replacement screws. When selecting grade and chipbreaker, match the TH10 uncoated carbide to the workpiece material and the intended stability of the setup: the uncoated grade performs best on non-ferrous materials and where low cutting forces are required. Because the insert is reversible, stock usage is optimised and tool-change frequency is reduced, supporting continuous, economical production.

For application-specific advice on Tungaloy turning inserts, compatibility checks for holders, or to request stock availability from Metav Werkzeuge (SKU TUN6803286), contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for prompt, technical assistance and fast supply.

Technical data

• Article number: 6803286-Tungaloy
• Manufacturer SKU: TUN6803286
• Manufacturer article number: 6803286
• Brand: Tungaloy

Facts

• Size: 15 mm
• Thickness: 4.76 mm
• Corner radius: 0.4 mm
• Cutting angle: 55°
• Clearance angle: 0°

Special features

• ISO rhombic DNMG150404 form
• Grade TH10, uncoated carbide
• Double-sided chipbreaker
• Cylindrical hole (with hole)
• Rhombic plate shape, neutral relief, reversible insert
• System components: insert, holder/boring bar, shim/clamping set, replacement screws

FAQ

What materials is this insert best suited for?
The DNMG150404 TH10 insert from Tungaloy is optimised for non-ferrous materials and applications that benefit from an uncoated carbide cutting edge to keep cutting forces low and surfaces clean.

How does the 0° clearance affect cutting performance?
A 0° clearance on the DNMG150404 gives a robust cutting edge that resists chipping under variable conditions, contributing to stable cutting when the setup has limited rigidity.

Can the insert be used on internal turning operations?
Yes, the rhombic geometry and reversible design make the insert suitable for both external and internal turning; appropriate holder selection is required to ensure correct seating and clearance.

Is the TH10 grade suitable for steel or hardened materials?
TH10 is a sharp, uncoated carbide grade intended primarily for non-ferrous work; for steel or hardened materials, a different coated or specialised grade should be chosen.

What determines compatibility with a tool holder?
Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; DNMG150404 inserts are compatible with holders designed for ISO DNMG plates.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.