DNMG 150604 TH10 Wendeplatten - Tungaloy

Benefit from the combination of a sharp, uncoated carbide cutting edge and an ISO‑compliant rhombic geometry for controlled low cutting forces and clean surfaces; use the 55° cutting angle and double‑sided design for versatile external and internal turning. Order the DNMG150604 TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed.

DNMG150604 TH10 indexable turning insert — Tungaloy (for turning)

DNMG150604 TH10 is an ISO‑compliant rhombic indexable insert for precision external and internal turning of non‑ferrous materials and similar applications

• ISO rhombic insert, 55° cutting angle
• Sharp uncoated carbide for non‑ferrous metals
• Double‑sided geometry with 0° relief angle
• Cylindrical hole for secure clamping

Optimised cutting performance with a sharp uncoated grade

The TH10 grade is an uncoated carbide chosen for applications where a sharp edge reduces cutting forces and produces a cleaner surface on non‑ferrous materials. The rhombic 55° geometry offers a balanced engagement that keeps cutting loads moderate while enabling stable chip formation. For light to medium cuts, this combination supports reliable chip control and predictable surface finish, making the insert suitable for both roughing passes where low cutting forces are needed and finishing operations that demand improved appearance.

Secure mounting and ISO compatibility for repeatable results

The insert features a cylindrical hole and standardised dimensions that match ISO‑type turning holders when form, free angle, tolerance class, fixation, size and thickness align. The 0° relief angle and the rhombic shape ensure stable seating in the pocket; the double‑sided design increases usable edges and helps maintain productivity. When the holder and clamp set are selected in accordance with ISO specifications, tool changeover is straightforward and repeatable, reducing machine downtime and setup uncertainty.

Practical guidance on grade and chipbreaker selection

With a double‑sided chipbreaker and the sharp TH10 grade, this insert is aimed primarily at non‑ferrous materials and applications where minimal cutting forces are critical. Select the chipbreaker and grade combination to match material, depth of cut and machine rigidity: TH10 supports clean shearing on softer alloys and promotes long tool life where an uncoated edge is favourable. For mixed‑material production, pairing the insert with a holder that offers good clamping stiffness will enhance edge stability and surface consistency.

Operational benefits and application scenarios

Using this ISO‑type insert reduces the need for complex coatings in applications that rely on mechanical edge sharpness rather than thermal protection. The compact 15 mm inscribed size, 6.35 mm thickness and 0.4 mm corner radius are well suited to light to medium turning duties on brass, aluminium and similar alloys. Process planners will value the predictable behaviour of the uncoated carbide in operations where tool‑induced heat and built‑up edge must be minimised, while workshop supervisors will appreciate the simplicity of an ISO‑standard geometry that fits a wide range of established holders.

Contact Metav Werkzeuge for tailored application advice on the DNMG150604 TH10 insert: info@metav-werkzeuge.com | +49 2822 7131930

Technical Data

• Article number: 6803527
• Manufacturer SKU: TUN6803527
• SKU: 6803527-Tungaloy
• Model series: ISO‑Drehwendeschneidplatten
• Designation: DNMG150604 TH10 Tungaloy‑Wendeplatte

Facts

• ISO code: 150604
• Cutting angle: 55°
• Thickness: 6.35 mm
• Inscribed size: 15 mm
• Corner radius: 0.4 mm
• Relief angle: 0°
• Hole: with cylindrical hole

Special features

• Material: carbide (uncoated)
• Shape: rhombic
• Chipbreaker: double‑sided
• Intended use: turning (external and internal)
• Compatibility: ISO turning holders (form, free angle, tolerance)
• Grade: TH10

FAQ

What materials is this insert best suited for?
The DNMG150604 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide grade supports low cutting forces and clean surface generation.

Is the insert compatible with standard ISO turning holders?
Yes. The DNMG150604 geometry and dimensions are ISO‑compliant; compatibility depends on matching holder form, free angle, tolerance class, fixation and thickness.

Does the insert have a coating?
No. The TH10 grade is an uncoated carbide selected for sharp‑edge performance rather than coated thermal protection.

What is the corner radius and how does it affect machining?
The corner radius is 0.4 mm; this provides a balance between strength and surface finish, suitable for light to medium turning where a modest radius helps resist edge chipping while maintaining good finish.

How is the insert secured in the holder?
The plate uses a cylindrical hole for positive clamping; when combined with an appropriate clamp set and screw, the seating is stable and repeatable.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.