RDCA 2004TN UX30 Wendeplatten - Tungaloy

Benefit from a combination of a sharp cutting edge, the UX30 uncoated carbide grade and a 15° relief angle that together reduce cutting forces and promote consistent chip formation for stable milling results; order the insert directly via Metav Werkzeuge or ask our consultants if needed.

RDCA 2004TN UX30 indexable insert for milling — Tungaloy

The RDCA2004TN UX30 is an indexable insert engineered for Tungaloy milling systems, offering a round form and precise geometry for face, shoulder, slot and high-feed milling operations.

• Sharp edge for low cutting forces
• UX30 uncoated carbide for consistent chip control
• Round 20 mm plate, 4.76 mm thickness, cylindrical hole

Proven performance with reduced cutting forces

The RDCA2004TN UX30 indexable insert combines an uncoated carbide composition with a deliberately sharp cutting edge to lower cutting resistance and improve chip flow. The result is a more efficient metal-removal process under moderate cutting conditions, which reduces spindle load and can extend the interval between tool changes. The 15° relief angle helps to minimise flank contact, while the geometry promotes reliable chip formation across a range of feeds, delivering measurable process stability for production environments that prioritise consistent throughput.

Straightforward fit and predictable replacement

Designed for seamless integration into compatible Tungaloy milling bodies, the insert’s round form with a cylindrical hole ensures secure seating and repeatable positioning. The nominal dimensions — 20 mm diameter and 4.76 mm plate thickness — are tailored for tool families that accept the 2004TN designation, so mechanical fit and clamping must match the cutter body and seat geometry. Where precise interchangeability is required, verify the toolholder and clamping screw specification; correct matching avoids runout and guarantees the expected surface finish and tool life.

Shop-floor benefits and economical productivity

On the shop floor, the combination of the UX30 grade and the insert’s geometry delivers reduced burr formation and easier chip evacuation, which cuts down on post-processing and inspection time. The uncoated carbide construction offers a reliable edge for operations where lower cutting forces and good chip formation are priorities rather than extreme thermal or abrasive conditions. This makes the insert a practical choice for job shops and production lines seeking a balance between machining efficiency and predictable component quality. Supportive process documentation and selection guidance further assist production engineers in achieving consistent results.

For low-force, consistent milling choose the Tungaloy RDCA2004TN UX30 indexable insert and contact Metav Werkzeuge for tailored recommendations and matching tool bodies at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6805875
• SKU: 6805875-Tungaloy
• Manufacturer SKU: TUN6805875
• Series: Fräswendeschneidplatten
• Material: Hartmetall
• Grade: UX30

Dimensions / Core data

• Diameter: 20 mm
• Thickness: 4.76 mm
• Relief angle: 15°

Design & special features

• Round plate with cylindrical hole
• With hole (zylindrisches Loch)
• Uncoated carbide construction
• No chipbreaker (ohne Spanbrecher)
• Intended for milling (Fräsen): face, shoulder, slot, high-feed and contour milling depending on tool family
• Designed for Tungaloy milling systems; seat, geometry and cutter body must match

FAQ

What milling operations suit this insert best?
The RDCA2004TN UX30 indexable insert (SKU 6805875-Tungaloy) is suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned tool family and cutter body.

Which materials are recommended for machining with this grade?
The UX30 uncoated carbide is chosen for applications prioritising low cutting forces and good chip formation; it performs well on general steels and similar materials where an uncoated grade is appropriate.

How is the insert secured in the cutter body?
The insert uses a round form with a cylindrical hole and must be mounted in a compatible Tungaloy milling body with the correct clamping screw and seat geometry to ensure repeatable positioning.

Is there a chipbreaker on this insert?
No; the specification indicates the insert is supplied without a chipbreaker, so process parameters should be set accordingly to achieve controlled chip formation.

What should be checked before installation?
Confirm that the cutter body, seat geometry and clamping screw correspond to the 2004TN designation and that the 20 mm diameter and 4.76 mm thickness match the tool family to avoid fit issues and ensure expected performance.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.