SPGW 090304 TH10 Wendeplatten - Tungaloy

Take advantage of the ISO compatibility and the TH10 uncoated carbide grade to achieve low cutting forces and clean surface finishes in turning operations; pair the insert with a suitable ISO holder and clamping kit from Metav Werkzeuge for reliable set-up and productive machining.

SPGW 090304 TH10 — ISO indexable turning insert for turning, Tungaloy

SPGW 090304 TH10 is an ISO-format indexable insert designed for general turning applications, providing a sharp, uncoated cutting edge for non-ferrous materials and finishing cuts

• ISO-format for broad holder compatibility
• Uncoated carbide for low cutting forces
• Square form with 0.4 mm corner radius
• Cylindrical hole with single-sided countersink

Consistent fit and straightforward integration into ISO systems

The ISO-standard designation ensures that the insert mates predictably with compatible holders, simplifying tool selection and reducing set-up time. The geometry is specified by form, relief angle, tolerance class, fastening arrangement, size and thickness, which together determine holder compatibility. Using an insert conforming to ISO specifications reduces variation between tool changes and supports consistent process parameters on the machine, helping to maintain cycle times and part quality.

Sharp uncoated grade for clean finishes and lower cutting forces

The TH10 grade is an uncoated carbide developed for applications where a sharp, uncoated cutting edge benefits the operation. This grade promotes low cutting forces and a clean surface finish when machining non-ferrous materials or light finishing cuts. Because the insert is uncoated, it can help to avoid adverse reactions such as built-up edge on softer materials; this characteristic makes the insert well suited to operations that prioritise surface integrity over extreme wear resistance.

Geometry and clamping designed for stable, repeatable turning

The square form and 0.4 mm corner radius deliver a robust cutting profile that is compatible with common turning strategies. The 11° relief angle supports positive cutting action and helps reduce rubbing on the flank. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), enabling secure clamping and repeatable seating in the toolholder. The 3.18 mm thickness contributes to rigidity in the cutting zone, which reduces vibration and supports a consistent surface result during external and internal turning.

Application guidance to improve productivity in turning

This indexable insert is intended for turning tasks where a clean cut and controllable forces are important. The absence of an integrated chipbreaker indicates the insert is optimally used in processes that rely on stable chip evacuation via geometry, coolant strategy or downstream chip control rather than aggressive chip segmentation. For best results, select a holder and clamping set that match the insert’s ISO geometry, and choose feeds and speeds aligned with TH10’s strengths to balance tool life and part finish.

Discuss application requirements and holder compatibility with Metav Werkzeuge — specialists can advise on matching the Tungaloy TH10 insert to the correct ISO holder and clamping kit; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6807101
• SKU: 6807101-Tungaloy
• Manufacturer SKU: TUN6807101
• Model series: ISO-Drehwendeschneidplatten
• Label: SPGW090304 TH10 Tungaloy-Wendeplatte
• Manufacturer: Tungaloy

Facts

• Size: 09
• Plate thickness: 3.18 mm
• Corner radius: 0.4 mm
• Relief angle: 11°
• Included angle: 90°

Special features

• Material: cemented carbide
• Grade: TH10 (uncoated)
• Form: square
• Hole: with cylindrical hole and single-sided countersink (40°–60°)
• Chipbreaker: none
• Application: turning
• System composition: ISO insert, compatible external holder or boring bar, shim/clamping set and replacement screws

FAQ

What materials is this insert best suited to machine?
The SPGW 090304 TH10 insert is specified for machining mainly non-ferrous materials and light finishing operations; the TH10 uncoated carbide grade supports low cutting forces and good surface quality when turning softer alloys.

How does the insert secure in the toolholder?
The insert features a cylindrical hole with a single-sided countersink, designed for secure clamping in compatible ISO holders; correct seating is ensured by matching the holder to the insert form, relief angle and thickness.

Is there a chipbreaker integrated on this insert?
No; this particular configuration is supplied without a chipbreaker, so chip control should be managed by process parameters, holder geometry or downstream chip management when using this insert.

Can the insert be used for both external and internal turning?
Yes; the insert’s geometry and thickness provide sufficient rigidity for both external and internal turning when employed with an appropriate holder and stable set-up.

What are the key geometry values to check when selecting a holder?
Verify the insert size (09), 3.18 mm thickness, 0.4 mm corner radius, 11° relief angle and the cylindrical hole with countersink to ensure full compatibility with the chosen toolholder.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.