TCGT 080200 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of ISO compatibility, a sharp uncoated carbide grade for low cutting forces, and a compact triangular geometry for productive external and internal turning; order directly via Metav Werkzeuge or consult the team for holder matching and process advice.

TCGT080200 TH10 Tungaloy turning insert — ISO triangular insert for turning, 60° pitch

TCGT080200 TH10 is an ISO‑standard triangular indexable turning insert for external and internal turning applications, designed for efficient machining of non‑ferrous materials and processes that benefit from a sharp, uncoated cutting edge.

• ISO‑standard triangular insert
• Sharp uncoated carbide TH10
• 7° clearance for low cutting forces
• Cylindrical hole with 40°–60° countersink

Stable machining with ISO compatibility and clear setup advantages

The insert belongs to an ISO series of indexable turning plates and is specified for turning operations where repeatable seating and secure clamping are essential. Compatibility with a toolholder or boring bar is determined by form, 7° relief angle, tolerance class, fastening method, size 08 and a thickness of 2.38 mm; matching these parameters ensures correct chip flow and tool life. The triangular geometry with a 60° point angle provides three usable cutting edges per insert, supporting efficient tool utilisation and predictable replacement intervals. For process planning, the insert’s ISO designation speeds up holder selection and stock management.

Lower cutting forces and improved surface finish for non‑ferrous workpieces

The uncoated carbide composition and the TH10 sharp universal grade are optimised for materials where low cutting forces and clean surfaces matter. An uncoated cutting edge reduces build‑up edge formation on aluminium and similar alloys and often achieves a finer finish at moderate cutting speeds than coated alternatives; this is beneficial in applications such as light alloy turning or when minimal workpiece distortion is required. The single‑sided chipbreaker promotes controlled chip formation, reducing recutting and helping to maintain consistent surface quality over the component length.

Practical set‑up, clamping reliability and suggested applications

Assembly is simple when the holder geometry and insert dimensions correspond: a suitable external holder or boring bar, the correct clamp or pad, and replacement screws make up the system. The insert is supplied with a cylindrical centre hole and a single‑side countersink (40°–60°) that secures the plate and enables precise seating under axial and radial loads. Recommended uses include both external and internal turning operations on non‑ferrous metals and soft alloys; the combination of one‑sided chipbreaker, compact thickness and triangular form supports productive machining in workshops where process stability and repeatable seating are priorities.

For precision turning with Tungaloy quality, contact Metav Werkzeuge for tailored holder recommendations and order support at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6807619
• Manufacturer SKU: TUN6807619
• SKU: 6807619-Tungaloy
• Manufacturer: Tungaloy
• Model series: ISO‑Drehwendeschneidplatten
• WPL designation: TCGT080200 TH10 Tungaloy‑Wendeplatte

Core dimensions

• Insert geometry: triangular, 60°
• Relief / clearance angle: 7°
• Thickness: 2.38 mm
• Size: 08
• ISO code: 080200
• Centre hole: with hole
• Countersink angle: 40°–60°

Special features

• Material: uncoated carbide
• Grade: TH10 (sharp universal for non‑ferrous)
• Chipbreaker: one‑sided
• Shape: triangular, three cutting edges
• Suitable for: external and internal turning
• System: ISO insert, compatible with matching holders and pads

FAQ

What materials is this insert best suited for?
The TCGT080200 TH10 insert is specified for non‑ferrous materials and applications where an uncoated, sharp carbide edge reduces cutting forces and improves surface finish.

How is the insert secured in the holder?
The insert features a cylindrical centre hole with a single‑side countersink (40°–60°) to ensure reliable clamping and repeatable seating in ISO‑compatible holders and boring bars.

What does the TH10 grade mean for machining performance?
TH10 denotes a sharp universal carbide grade optimised for low cutting forces and clean surfaces, particularly effective on aluminium and similar alloys.

How many cutting edges are available per insert?
The triangular geometry with a 60° pitch provides three usable cutting edges per insert, supporting economical edge rotation.

Is a coated version available for harder materials?
This listing refers to an uncoated carbide insert; for higher‑temperature or abrasive applications a coated grade may be more appropriate and can be recommended by Metav Werkzeuge.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.