TCGT 110200 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of a sharp, uncoated carbide TH10 grade and ISO conformity for clean surface finishes and low cutting forces; the compact triangular geometry with a 7° relief angle ensures secure clamping and predictable machining results. Order the insert directly via Metav Werkzeuge or ask their consultants for holder compatibility and application advice.

TCGT110200 TH10 ISO 110200 triangular insert for turning — Tungaloy

The TCGT110200 TH10 indexable insert is an ISO-standard triangular turning insert designed for external and internal turning where low cutting forces and excellent surface quality are required.

• ISO 110200 triangular insert for turning
• Uncoated carbide grade TH10 for low cutting forces
• 7° relief angle and 60° included angle
• Cylindrical hole with single-sided countersink

Sharper cuts and lower cutting forces with an uncoated TH10 grade

The uncoated carbide TH10 grade is formulated as a sharp, universal option for applications on non‑ferrous and easily machined materials. Its geometry and edge preparation reduce cutting forces, which translates into less deflection on slender parts and improved surface finishes. Specifying a sharp, uncoated grade is particularly advantageous when the priority is controlled chip formation and minimal burrs rather than extreme wear resistance.

Predictable clamping and ISO compatibility for reliable production

Because the insert conforms to the ISO 110200 family, compatibility with holders is governed by measurable factors such as shape, relief angle (7°), tolerance class, clamping method, size and thickness. The compact 2.38 mm thickness and 11 mm size support rigid mounting in matched indexable holders. Choosing the correct clamping set and seating pad reduces vibration, enabling consistent tool life and repeatable component quality.

Geometry and chip control that support finishing operations

The triangular form with a 60° included angle gives three usable cutting edges per insert, improving economy in batch production. A single-sided chipbreaker helps to break and evacuate chips in light to moderate cutting conditions, aiding surface integrity. The insert’s hole — a cylindrical bore with a single-sided countersink (40°–60°) — ensures secure fastening and correct seat alignment when paired with the recommended clamping hardware.

Application focus: turning non‑ferrous and delicate components

Intended primarily for turning, this insert performs best in finishing, profiling and light to medium machining of non‑ferrous materials where reduced cutting forces and clean finishes are essential. The combination of uncoated carbide and precise geometry reduces built-up edge and supports consistent results on delicate workpieces; selecting the appropriate chipbreaker and cutting data will maximise process security and surface quality.

Contact Metav Werkzeuge for tailored advice on holder selection and cutting parameters for the Tungaloy TH10 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to match the insert to machining conditions.

Technical data

• Article number: 6807645
• SKU: 6807645-Tungaloy
• Manufacturer SKU: TUN6807645
• Model series: ISO turning indexable inserts
• Manufacturer: Tungaloy

Facts

• ISO code: 110200
• Thickness: 2.38 mm
• Size: 11 mm
• Relief angle: 7°
• Included angle: 60°

Special features

• Shape: triangular
• Hole: cylindrical hole with single-sided countersink (40°–60°)
• Chipbreaker: single-sided
• Grade: TH10 uncoated carbide
• Application: turning (external and internal)
• Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness

FAQ

Which materials is this insert best suited for?
The TCGT110200 TH10 insert from Tungaloy is optimised for non‑ferrous and easily machined materials where a sharp, uncoated edge reduces cutting forces and improves surface finish.

How is holder compatibility ensured for this insert?
Compatibility depends on matching the insert form, 7° relief angle, size 11 mm, thickness 2.38 mm and clamping method to the holder; the ISO 110200 code aids correct selection.

Is this insert suitable for heavy roughing?
The TH10 uncoated grade is primarily intended for finishing and light to medium machining; for heavy roughing a wear‑resistant, coated grade would be more appropriate.

How does the hole and countersink influence clamping?
The cylindrical hole with a single‑sided countersink (40°–60°) provides precise seating and reliable clamp engagement when used with the correct screw and pad, improving repeatability.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.