TCGT 110204 TH10 Wendeplatten - Tungaloy

Take advantage of the uncoated carbide TH10 grade and the precise 0.4 mm corner radius to achieve low cutting forces and clean surface finishes in non-ferrous turning operations; compatibility with ISO holders is ensured by standardised form, relief angle and thickness, offering straightforward integration into existing tool systems. Order the TCGT110204 TH10 insert directly via Metav Werkzeuge or ask our consultants for application advice.

TCGT110204 TH10 Tungaloy turning insert — ISO triangular indexable insert, 0.4 mm radius

TCGT110204 TH10 is a triangular ISO indexable insert designed for general-purpose external and internal turning, especially suited to non-ferrous materials and light finishing cuts

• Uncoated TH10 grade for low cutting forces
• Triangular 60° geometry with 0.4 mm radius
• Single-sided chipbreaker for clean surfaces
• With hole and one-sided countersink for secure clamping

Reliable chip control for non-ferrous turning

The triangular ISO indexable insert offers a balanced geometry that reduces vibration and delivers a consistent cutting action in non-ferrous materials. The TH10 uncoated carbide grade is optimised for applications where an uncoated edge reduces built-up edge and supports lower cutting forces, which in turn leads to improved surface quality and longer tool life under the right conditions. The single-sided chipbreaker is designed to shape chips effectively during light to medium cuts, so the machining process stays predictable and efficient.

Reduced setup complexity and secure clamping

Compatibility is determined by form, 7° relief angle, tolerance class, clamping method, size and thickness—factors that make mounting straightforward in matched ISO holders or boring bars. The insert includes a central hole with a cylindrical bore and a one-sided countersink (40°–60°), enabling positive seating and repeatable positioning when used with the proper shim and clamp set. This systematic approach to tool assembly reduces setup time and minimises the risk of incorrect fitment in production environments.

Geometry tuned for finishing and finishing feeds

With a nominal size of 11 and a thickness of 2.38 mm, the insert’s 60° included angle and 0.4 mm corner radius support fine finishing passes while still permitting modest stock removal when required. The compact thickness and precise tolerances allow stable clamping and accurate repeatability, which benefits part-to-part consistency. Where surface finish is critical, the uncoated cutting edge helps produce cleaner contact between tool and workpiece, especially on softer non-ferrous alloys.

System compatibility and practical implementation

The insert is intended to be used as part of a complete system: ISO insert, matched external holder or boring bar, backing/shim and clamp set, plus replacement screws. Selecting the correct chipbreaker and grade for the specific workpiece material and machining conditions will yield the best balance between productivity and finish quality. The uncoated carbide composition provides a predictable cutting response and is particularly useful where adhesion-prone materials can otherwise cause edge build-up.

For application-specific recommendations or to secure supply of Tungaloy TH10 inserts, contact Metav Werkzeuge—technical consultation and stock information available via info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6807675
• Manufacturer SKU: TUN6807675
• Model series: ISO-Drehwendeschneidplatten
• Material: Hartmetall
• ISO designation: TCGT110204
• Shape: triangular

Facts

• Size: 11
• Thickness: 2.38 mm
• Corner radius: 0.4 mm
• Relief angle: 7°
• Included angle: 60°

Special features

• Grade: TH10 (uncoated carbide)
• Chipbreaker: single-sided
• Hole: with hole
• Hole style: cylindrical hole + one-sided countersink (40°–60°)
• Typical application: external and internal turning
• System components: insert, outer holder/boring bar, backing/shim and clamp set, replacement screws

FAQ

What materials is this insert optimised for?
The TCGT110204 TH10 insert is optimised for non-ferrous materials and applications where an uncoated edge supports low cutting forces and clean finishes.

How does the insert secure to the toolholder?
The insert uses a central cylindrical hole with a one-sided countersink (40°–60°) for positive seating; combined with the correct shim and clamp set, it ensures repeatable, secure clamping.

Can this insert be used for internal turning as well as external turning?
Yes, the triangular geometry and ISO standard form make the insert suitable for both internal and external turning operations when paired with the appropriate boring bar or holder.

What benefit does the TH10 uncoated grade provide?
The TH10 uncoated carbide grade reduces built-up edge on adhesion-prone materials, lowering cutting forces and improving surface quality in finishing and light machining tasks.

Which holders are compatible with this insert?
Compatibility depends on matching the insert’s form, relief angle, tolerance class, size and thickness to the holder specification; use ISO-compatible external holders or boring bars designed for triangular inserts.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.