TDMN 110304 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of efficient cutting performance, reliable geometry and easy integration into Tungaloy milling systems for a smooth production flow. Order the insert directly via Metav Werkzeuge or consult the specialists for application support.

TDMN 110304 TH10 Tungaloy triangular indexable insert for milling – 60° form, R0.4

A triangular TDMN110304 TH10 indexable insert engineered for milling operations, optimised for non‑ferrous materials and applications requiring low cutting forces and clean surface finishes.

• Triangular insert for 60° milling
• Uncoated cemented carbide TH10 grade
• Low cutting forces for non‑ferrous materials
• 0.4 mm corner radius for fine contouring

Productivity through low cutting forces and clean finishes

The insert's uncoated cemented carbide specification and the TH10 grade are matched to applications where minimal cutting resistance and high surface quality matter. In practical terms, the sharp, uncoated cutting edge reduces burr formation and power demand during machining of aluminium, brass and various plastics, which translates into faster cycle times and reduced secondary finishing. Economical machining is supported by the insert's consistent edge condition, so component tolerances are maintained with fewer tool changes and predictable tool life.

Geometry that ensures repeatable accuracy and secure clamping

A precise 60° triangular geometry combined with a corner radius 0.4 mm and 3.18 mm thickness delivers stable contact between insert and cutter body. This geometry enables repeatable seat alignment and reduces micro‑vibrations during face, shoulder and contour milling. The requirement that insert seat, geometry and milling body match technically emphasises the system approach: correct combination of milling body, indexable insert, clamping screw and, when required, a backing pad ensures secure fixation and reproducible results across assemblies.

Versatility across milling operations and tool families

The insert suits a broad range of milling tasks such as face milling, shoulder milling, slotting, high‑feed strategies and contouring, depending on the assigned tool family and holder. The absence of a chipbreaker and the uncoated cutting edge favour operations where chip evacuation is managed by the toolpath and machine setup rather than the insert geometry. As part of a coordinated system, the component contributes to efficient, predictable machining on non‑ferrous components and workpieces that demand a clean surface appearance.

Clear technical choices for straightforward application

Key measurable attributes — size 11 mm, thickness 3.18 mm, corner radius 0.4 mm, free angle 15° and 60° included angle — make selection for specific applications straightforward. The insert is delivered without hole and without chipbreaker, so holders and clamping screws must be chosen to suit a solid triangular seat. Where uncertainty exists about compatibility or optimal cutting parameters, Metav Werkzeuge can supply detailed recommendations based on machine capabilities and workpiece material to help avoid costly trial-and-error.

For tailored application advice or to order the TDMN 110304 TH10 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specialist guidance and fast availability

Technical Data

• Article number: 6807787
• SKU (merchant): 6807787-Tungaloy
• Manufacturer SKU: TUN6807787
• Item designation: TDMN110304 TH10 Tungaloy‑indexable insert
• Series: Fräswendeschneidplatten

Facts

• ISO designation: 110304
• Insert size: 11 mm
• Thickness: 3.18 mm
• Corner radius: 0.4 mm
• Included angle: 60°
• Free clearance angle: 15°

Special features

• Shape: triangular
• Grade/coating: TH10, uncoated cemented carbide
• Hole style: without hole
• Chipbreaker: without chipbreaker
• Intended use: milling (face, shoulder, slot, high‑feed, contour) depending on tool family
• System assembly: milling body, indexable insert, clamping screw, backing pad

FAQ

Which materials are best machined with this insert?
The TDMN110304 TH10 insert, made from uncoated cemented carbide, is optimised for non‑ferrous materials such as aluminium, brass and many plastics, where low cutting forces and a clean surface finish are priorities.

For which milling operations is this insert suitable?
Typical uses include face milling, shoulder milling, slotting, high‑feed strategies and contour milling; the exact operation depends on the selected milling body and tool family associated with the insert.

What are the critical dimensions and geometry to consider?
Key data are size 11 mm, thickness 3.18 mm, corner radius 0.4 mm, included angle 60° and free angle 15°; the insert is supplied without hole and without chipbreaker.

Can this insert be used in other manufacturers' holders?
Insert seat, geometry and milling body must match technically; compatibility requires checking that the host cutter accepts a triangular 60° insert of the specified thickness and seat form.

Is the cutting edge coated?
This model uses an uncoated TH10 cemented carbide grade to achieve sharp cutting action and reduced cutting forces in suitable materials.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.