TNMA 160408 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of ISO conformity, a sharp TH10 uncoated carbide grade and compact triangular geometry for stable turning and clean surface finishes. Order the TNMA160408 TH10 inserts directly via Metav Werkzeuge or consult the sales team for application-specific advice.

TNMA160408 TH10 Tungaloy indexable turning insert — 60° triangular for turning

A TNMA160408 TH10 indexable insert engineered for general turning, optimised for non‑ferrous materials and light finishing operations.

• TNMA 160408 triangular 60° geometry
• Uncoated carbide TH10 for low cutting forces
• 0° clearance for stable external turning
• Cylindrical hole for standard holder compatibility

Consistent cutting performance with a sharp universal grade

The combination of the TH10 grade and uncoated carbide substrate is aimed at applications where low cutting forces and a clean surface are priorities. The uncoated cutting edge remains sharp and reduces cutting resistance on non‑ferrous materials, supporting more consistent chip flow and fewer burrs. This results in reliable outcomes when machining aluminium alloys, copper alloys or softer metals where a precise edge and modest thermal load are important. The design contributes to shorter cycle times and reduced rework, enhancing process efficiency across batch production.

Geometry that controls surface finish and tool life

The triangular, 60° geometry with a 0.8 mm corner radius balances form stability and finishing capability: the corner radius reduces edge stress while providing a fine surface at typical finishing feeds. The 0° clearance specification is suited to many external turning and light profiling tasks, where the relief angle supports predictable contact conditions between insert and workpiece. As an ISO‑compliant insert, the geometry and dimensions enable straightforward replacement in standard ISO turning holders, helping to maintain repeatable machining parameters and predictable wear characteristics.

Practical guidance for mounting and application choices

This ISO insert is supplied with a cylindrical centre hole and requires a compatible clamping system: the suitability of any holder is determined by insert form, relief angle, tolerance class, fastening method, size and thickness. As the insert is supplied without a chipbreaker, selection of a matching chip control solution should be based on material, rigidity of the setup and desired chip form. For operations that demand higher control at heavier cuts, pairing with an appropriate top clamp or selecting a holder with positive rake options will support process stability. If application limits are uncertain, a brief cut test under production‑representative conditions will validate performance.

Productivity benefits and inventory simplicity

Using a universal, uncoated grade minimises the need for multiple coated variants in stock when primarily machining non‑ferrous components. The standardised ISO format simplifies tool changes and toolholding logistics, helping to reduce setup time and spare part complexity. The insert’s construction and Tungaloy manufacturing standards promote consistent edge quality from index to index, supporting predictable cycle outcomes and easier process planning. For small‑batch or mixed‑series production, this leads to improved throughput and a lower incidence of scrap.

For application advice or to request TNMA160408 TH10 inserts from Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6808272
• Manufacturer SKU: TUN6808272
• SKU: 6808272-Tungaloy
• Designation: TNMA160408 TH10 Tungaloy insert

Core data

• Insert size: 16 mm
• Thickness: 4.76 mm
• Corner radius: 0.8 mm
• Relief angle: 0°
• Included angle: 60°

Special features

• Shape: triangular
• Hole: cylindrical, with hole
• Grade: TH10
• Cutting material: uncoated carbide
• Chipbreaker: none
• Application: turning
• Model series: ISO indexable turning inserts
• Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness

FAQ

Which materials are best suited to this insert?
The TNMA160408 TH10 is optimised for non‑ferrous materials and softer alloys; the TH10 uncoated carbide grade supports low cutting forces and a clean surface finish on aluminium and similar metals.

Is the insert compatible with standard ISO turning holders?
Yes — the insert follows ISO dimensions for TNMA 160408 geometry; compatibility is defined by holder form, relief angle, tolerance class, fastening and thickness.

Does this insert include a chipbreaker for automatic chip control?
This variant is supplied without a chipbreaker; chip control should be achieved via holder selection or an alternative insert geometry if required.

What is the hole style and how does it affect clamping?
The insert features a cylindrical centre hole, which is suitable for conventional clamping systems and standard screws used in ISO indexable holders.

Can the TNMA160408 TH10 be used for finishing passes?
Yes — the 0.8 mm corner radius and 60° geometry make the insert appropriate for light finishing operations where a fine surface and low cutting forces are desired.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.