TNMG 110308 TH10 Wendeplatten - Tungaloy

Take advantage of the sharp TH10 uncoated carbide grade and the precise r0.8 corner radius for low cutting forces and clean surface finishes in turning operations; order directly via Metav Werkzeuge or request application advice from our consultants for seamless tool integration.

TNMG 110308 TH10 triangular indexable insert for turning, 60° — Tungaloy

TNMG 110308 TH10 Tungaloy turning insert is an ISO‑standard triangular insert designed for versatile external and internal turning applications, engineered to deliver low cutting forces and improved surface quality on non‑ferrous materials.

• ISO triangular insert TNMG110308
• Uncoated carbide grade TH10
• r0.8 corner radius for fine finishing
• Double-sided insert with cylindrical hole

Reliable performance for non‑ferrous and low‑force turning

The combination of an uncoated carbide substrate and the TH10 grade provides a sharp, universal cutting edge that supports reduced cutting forces and cleaner surface outcomes when machining non‑ferrous alloys. The 60° triangular geometry, paired with a corner radius of 0.8 mm, balances edge strength and finishing capability, making the insert suitable for both profiling and light roughing. This results in steady tool engagement and predictable chip formation, which contributes to consistent component quality and reduced rework.

Compatibility and straightforward changeover for efficient production

Delivered as an ISO‑normed insert, the unit interfaces with standard triangular holders and matching underlays. Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness, so selecting the correct clamping system is essential for repeatable results. The double‑sided design doubles the usable life per index, while the cylindrical centre hole assures stable seat location and secure fixation. These attributes simplify inventory management and support fast, reproducible insert indexing during shift changes.

Process benefits and economic reasoning

Using a sharp, uncoated grade such as TH10 reduces cutting energy in applications where low forces are paramount; this can extend tool life and lower cycle‑time variability. The insert’s geometry and edge preparation are optimised for stable chip control and surface integrity, helping to reduce downstream finishing operations. From a cost‑effectiveness perspective, the double‑edged configuration increases the number of usable cutting edges per insert, contributing to a higher yield per item and a reduced per‑component tooling cost.

Practical guidance and recommended use cases

Intended primarily for turning, the insert is especially effective on aluminium, brass and other non‑ferrous materials where a sharp edge fosters good surface finish. For mixed workshops, a matching chipbreaker and grade selection should be chosen according to material, machining strategy and machine stability. For questions about holder compatibility or process setup, Metav Werkzeuge provides technical advice and can support selection of the correct clamping and underlay components to ensure safe and repeatable use.

For reliable turning performance with the TH10 uncoated carbide grade, contact Metav Werkzeuge for ordering, compatibility checks and technical guidance.

Technical data

• Article number: 6808308
• Manufacturer SKU: TUN6808308
• Stock SKU: 6808308-Tungaloy
• ISO designation: TNMG110308
• Grade: TH10
• Material: cemented carbide

Facts

• Corner radius: 0.8 mm
• Insert size: 11 mm
• Thickness: 3.18 mm
• Cutting angle: 60°
• Clearance angle: 0°

Special features

• Double-sided chipbreaker
• Cylindrical centre hole
• Triangular insert geometry
• ISO‑standard turning insert
• Sharp universal grade for non‑ferrous materials

FAQ

What materials is this insert best suited for? The TNMG110308 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass, offering low cutting forces and clean finishes.

Is the insert reversible and how many cutting edges are available? Yes, the triangular TNMG110308 is double‑sided, providing multiple usable cutting edges per index to extend operational life.

What determines compatibility with a tool holder? Compatibility is governed by the holder’s form, clearance angle, tolerance class, fastening method, insert size and thickness; the TNMG110308 is manufactured to ISO standards to support common holders.

Does the uncoated TH10 grade require special speeds or feeds? The uncoated TH10 grade is intended for sharp cutting with reduced forces; recommended speeds and feeds depend on the workpiece material and machine rigidity and should be set to favour stable chip formation.

Can this insert improve surface finish compared with coated grades? In many non‑ferrous applications the sharp uncoated edge of the TH10 grade yields superior surface integrity due to lower friction and reduced built‑up edge.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.