TPGA 110302 TH10 Wendeplatten - Tungaloy

Take advantage of a proven combination of ISO conformity, an uncoated carbide TH10 grade and compact geometry to achieve low cutting forces and clean surfaces in non‑ferrous turning operations; order directly via Metav Werkzeuge or ask the consultants for application guidance.

TPGA110302 TH10 Tungaloy insert — ISO triangular turning insert, 60° geometry, cylindrical hole

The TPGA110302 TH10 is a triangular ISO turning insert for external and internal turning applications, designed for efficient machining of non‑ferrous materials where a sharp, uncoated cutting edge reduces cutting forces and improves surface finish.

• ISO triangular insert, 60° geometry
• Uncoated carbide TH10 for low cutting forces
• 11° clearance, 0.2 mm corner radius
• Cylindrical hole for secure clamping

Consistent, efficient cutting for non‑ferrous materials

The insert is made from carbide in the TH10 grade and is uncoated, which supports a particularly sharp edge. This results in lower cutting forces and a cleaner surface on materials such as copper alloys and aluminium. The combination of a defined 60° geometry and a 0.2 mm corner radius helps to distribute cutting loads while maintaining dimensional control; this is particularly useful in finishing passes where surface quality matters. For production environments seeking predictable tool behaviour, the sharp, uncoated edge of this insert offers a practical balance between economy and performance.

Reliable seating and holder compatibility for uninterrupted production

Designed to ISO standards, the insert’s triangular form and cylindrical hole ensure compatibility with a wide range of ISO turning holders and boring bars when the correct form, clearance and tolerance class are observed. The 11° clearance minimises rubbing and improves chip evacuation, which in turn reduces vibration and wear on the holder assembly. Proper seating and the use of the correct clamping set or screw maintain positional accuracy and repeatability, supporting longer runs with fewer interruptions.

Clear selection criteria and predictable process results

Selection of this insert should be based on workpiece material, machining stability and desired surface finish. The uncoated carbide makes the grade well suited to light to medium cutting conditions and to applications where low cutting force is a priority. In less stable setups, pairing the insert with an appropriate chipbreaker or a more robust holder reduces the risk of chatter; where a fine surface is required, smaller corner radii and the sharp TH10 edge enable improved finish without excessive cutting loads. The ISO conformity simplifies integration in existing tool inventories and supports fast, error‑free selection.

Practical benefits for workshop workflows

Using an ISO‑standard insert reduces setup time and allows quick replacement during scheduled tool changes, improving overall machine uptime. The triangular form provides three usable cutting edges per insert, optimising tooling cost per edge when compared with single‑edge alternatives. Moreover, the simple geometry and uncoated edge allow predictable regrinding or inspection approaches in toolrooms that prefer manual edge maintenance. These operational advantages contribute to reliable cycle times and consistent part quality across batch runs.

Contact Metav Werkzeuge for tailored advice on using the Tungaloy TPGA110302 TH10 insert in specific machining scenarios and request application support or order details from Metav Werkzeuge.

Technical data

• Article number: 6808772
• Manufacturer SKU: TUN6808772
• Material: carbide
• Model series: ISO turning inserts
• ISO designation: TPGA110302
• Shape: triangular
• Size: 11 mm
• Thickness: 3.18 mm
• Corner radius: 0.2 mm
• Clearance angle: 11°
• Insert angle: 60°
• Hole style: cylindrical hole
• Grade / sort: TH10
• Application: turning

Facts

• Thickness: 3.18 mm
• Insert size: 11 mm
• Corner radius: 0.2 mm
• Clearance angle: 11°
• Main angle: 60°
• Article number: 6808772
• Manufacturer SKU: TUN6808772

Special features

• Uncoated carbide grade TH10
• Triangular insert with three cutting edges
• Cylindrical hole for positive clamping
• ISO‑compliant geometry for holder compatibility
• Intended for turning, external and internal

FAQ

What materials is this insert best suited for?
The TPGA110302 TH10 insert is optimised for non‑ferrous materials such as aluminium and copper alloys, where the sharp, uncoated TH10 edge promotes low cutting forces and good surface finish.

How does the insert secure to the holder?
The triangular insert features a cylindrical hole and ISO geometry that enable secure clamping in compatible holders when the correct clamp and screw are used.

Can this insert be used for finishing passes?
Yes — the combination of a 0.2 mm corner radius and the sharp carbide edge of the TH10 grade is suitable for finishing operations that require reduced cutting force and improved surface quality.

Is the insert compatible with standard ISO holders?
The ISO designation TPGA110302 ensures compatibility with ISO‑standard turning holders, subject to correct matching of form, clearance angle and tolerance class.

How many cutting edges are available per insert?
The triangular shape provides three usable cutting edges, offering cost efficiency through multiple indexed positions.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.