TPGA 110304 TH10 Wendeplatten - Tungaloy

Take advantage of a sharp, universal uncoated carbide grade and ISO-standard geometry to ensure low cutting forces and clean surfaces in non‑ferrous turning operations. The combination of a compact 60° triangle shape, a 0.4 mm corner radius and a 3.18 mm plate thickness delivers stable clamping and reliable repeatability — order genuine inserts or consult Metav Werkzeuge for holder compatibility and application advice.

TPGA 110304 TH10 — ISO triangle turning insert for Drehen by Tungaloy, uncoated carbide, 60° main angle

A TPGA110304 TH10 ISO-standard triangle insert engineered for external and internal turning, offering a sharp, universal uncoated carbide grade suited to non‑ferrous materials and applications requiring low cutting forces and good surface finish

• TPGA110304 60° triangle insert
• Uncoated carbide grade TH10
• 0.4 mm corner radius for versatility
• 3.18 mm thickness with cylindrical hole

Consistent fit with ISO tool systems reduces setup time and errors

The insert follows the ISO standard geometry, so compatibility with a toolholder is determined by form, clearance angle, tolerance class, clamping method, size and thickness. This standardisation enables predictable mounting and repeatable positioning, which reduces set‑up time and minimises clamping errors on production lines. For workshops and job shops that run mixed batches, the standard form simplifies inventory planning and ensures the insert integrates smoothly into existing turning systems.

Sharp, uncoated grade for low cutting forces and clean surfaces

The TH10 grade is an uncoated carbide chosen for its sharp cutting edge and universal performance on non‑ferrous materials. In practice this means lower cutting forces and improved surface quality when turning aluminium, brass or similar alloys. An uncoated edge avoids excess built‑up edge on softer metals and supports predictable chip formation where a fine finish and reduced cutting temperature are priorities.

Geometry that balances strength and finish for reliable machining

The triangle shape with a 60° included angle provides multiple usable cutting edges per insert while maintaining edge strength. A 0.4 mm corner radius gives a compromise between robust edge life and surface finish, and the 11° relief (clearance) angle helps prevent rubbing during entry. The cylindrical hole and standard clamping interface deliver secure fastening and consistent repeatability under load, while the 3.18 mm plate thickness increases stability during heavy or interrupted cuts.

Practical application advice for turning operations

Designed for both external and internal turning, the insert is supplied without a chipbreaker, which suits straightforward chip flow in non‑ferrous machining; where chip control is essential, select a matching chipformer and grade to the workpiece and machining conditions. Typical system components include the ISO indexable insert, a compatible external holder or boring bar, a locating pad or clamp set and the appropriate screw. For optimisation of cutting data and holder choice, consult the supplier’s product guidance before first use.

For application guidance or to request genuine Tungaloy TPGA110304 TH10 inserts, contact Metav Werkzeuge — our specialists advise on holder compatibility and process optimisation

Technical Data

• Article number: 6808775
• SKU: 6808775-Tungaloy
• Manufacturer SKU: TUN6808775
• Model series: ISO-Drehwendeschneidplatten
• Label: TPGA110304 TH10 Tungaloy-Wendeplatte

Dimensions & ratings

• Plate thickness: 3.18 mm
• Corner radius: 0.4 mm
• Relief angle: 11°
• Included angle: 60°
• Plate size: 11 mm
• Hole: with hole

Features & applications

• Material: cemented carbide
• Grade: TH10 (uncoated)
• Insert shape: triangular
• Chipbreaker: without
• Hole style: cylindrical hole
• Typical use: turning (external and internal)
• System: ISO insert compatible with standard holders

FAQ

What materials is this insert suitable for?
The TPGA110304 TH10 insert by Tungaloy is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide grade supports low cutting forces and clean surface finishes.

How is compatibility with a toolholder determined?
Compatibility depends on insert form, relief angle (11°), tolerance class, clamping method, plate size (11 mm) and thickness (3.18 mm); match these parameters to the holder specifications when using the TPGA110304 TH10.

How many cutting edges are available per insert?
A triangular insert provides three primary cutting edges; the TPGA110304 TH10 can be indexed to present a fresh edge when required.

What does 'without chipbreaker' mean for machining?
'Without chipbreaker' indicates the insert does not have a dedicated chip control geometry; for the TPGA110304 TH10 this is suitable for straightforward chip flow in non‑ferrous turning or when a separate chipformer is used.

What is the advantage of the 0.4 mm corner radius?
A 0.4 mm corner radius balances edge strength and surface finish, offering versatility between light finishing cuts and moderate roughing operations with improved tool life.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.