TPGM 160304 TH10 Wendeplatten - Tungaloy

Benefit from the combination of low cutting forces and clean surface finishes delivered by the TH10 uncoated carbide grade and the ISO-standard TPGM geometry; the balanced corner radius and single-sided chipbreaker ensure predictable chips and stable turning. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific guidance.

TPGM 160304 TH10 — ISO triangular indexable turning insert for turning, Tungaloy

The TPGM 160304 TH10 is an ISO-standard triangular indexable turning insert designed for external and internal turning, offering a 0.4 mm corner radius and a single-sided chipbreaker for controlled chip formation.

• Uncoated carbide for low cutting forces
• Triangle form with cylindrical hole
• 0.4 mm corner radius for balanced strength
• 3.18 mm plate thickness for secure clamping

Improved process efficiency through lower cutting forces

The uncoated TH10 carbide grade is a sharp, universal choice optimised for non-ferrous materials and operations where a clean cutting edge reduces cutting force. Lower cutting forces result in reduced vibration and energy consumption, which in turn stabilises the machining process and protects the toolholder. The combination of a sharp grade and a tailored chipbreaker leads to predictable chip formation; predictable chips reduce interruptions and improve cycle-time consistency, delivering measurable efficiency gains on repetitive turning tasks.

Straightforward integration with ISO tooling systems

Compatibility of this ISO insert is determined by geometry, relief angle, tolerance class, clamping method, size and thickness, which simplifies selection when matching to holders or boring bars. The 11° relief angle and 3.18 mm thickness are key parameters for ensuring correct seat and clamping; the insert’s triangular form and cylindrical hole enable reliable location in ISO-compatible clamping systems. Clear specification of these dimensions supports fast tool changeover and repeatable seating, reducing setup time and the risk of misloading.

Reliable edge performance for high-quality surfaces

A 0.4 mm corner radius provides a balance between edge strength and the ability to produce fine surface finishes: small radii suit detail work and tight profiles, while this radius still offers sufficient toughness for stable feeds. The insert’s single-sided chipbreaker helps form short, manageable chips in non-ferrous turning, lowering the chance of built-up edge and minimising surface defects. For applications prioritising surface quality and low machining forces, the geometry and grade combine to deliver consistent, clean results.

Practical application advice for industrial turning

The insert is suited to a range of turning operations including external and internal turning where the workpiece material matches the grade’s strengths, notably aluminium alloys, brass and other non-ferrous metals. When selecting a holder, ensure the seat matches ISO TPGM geometry and that clamping hardware accommodates the 3.18 mm thickness and the cylindrical locating hole. For higher stability or interrupted cuts, consider a heavier-duty holder or reduced overhang to complement the insert’s characteristics and maintain process reliability.

For application advice or to secure genuine Tungaloy TPGM 160304 TH10 inserts, contact Metav Werkzeuge for tailored recommendations and availability — email info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6808814
• Manufacturer SKU: TUN6808814
• Dealer SKU: 6808814-Tungaloy
• Brand: Tungaloy
• Model series: ISO indexable turning inserts
• Material: Carbide

Core dimensions

• Size: 16 mm
• Plate thickness: 3.18 mm
• Corner radius: 0.4 mm
• Relief angle: 11°
• Included angle: 60°
• Hole: with hole (cylindrical)
• Chipbreaker: single-sided

Design and special features

• ISO designation: TPGM160304
• Grade: TH10 (uncoated carbide)
• Shape: triangular
• Typical application: turning (external & internal)
• Compatibility determined by form, relief angle, tolerance class, clamping, size, thickness

FAQ

What materials is this insert best suited for?
The TPGM 160304 TH10 insert is designed primarily for non-ferrous materials such as aluminium alloys and brass; the TH10 uncoated carbide grade promotes low cutting forces and clean surface finishes in these applications.

How does the single-sided chipbreaker affect turning performance?
A single-sided chipbreaker on this insert produces short, controlled chips in suitable materials, reducing the risk of entanglement and improving surface consistency during continuous turning operations.

Which clamping and holder features must be checked before use?
Ensure the holder matches the ISO TPGM geometry, accommodates a 3.18 mm plate thickness and the cylindrical locating hole, and provides stable clamping to benefit from the insert’s performance characteristics.

Can this insert handle interrupted cuts or heavy feeds?
The 0.4 mm corner radius offers a compromise between edge strength and finish; for heavy, interrupted cuts, a sturdier holder or reduced overhang is recommended to maintain stability and protect the cutting edge.

Is the insert supplied coated or uncoated?
This insert is an uncoated carbide grade (TH10), chosen to keep cutting forces low and to avoid built-up edge when machining non-ferrous materials.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.