TPGW 110202 TH10 Wendeplatten - Tungaloy

Combining the sharp TH10 uncoated carbide grade with a 0.2 mm corner radius and ISO triangular geometry, this insert provides low cutting forces and clean surface finishes for turning non‑ferrous components. Order the Tungaloy insert directly via Metav Werkzeuge or consult their technical team for holder compatibility and application advice.

TPGW110202 110202 TH10 — Tungaloy ISO turning insert (triangular, 0.2 mm radius)

The TPGW110202 TH10 is an ISO triangular indexable insert for external and internal turning, optimised for low cutting forces and fine surface quality in non‑ferrous machining.

• ISO triangular insert for turning
• Uncoated carbide grade TH10
• 0.2 mm corner radius for fine finish
• Centre hole with cylindrical plus countersink

High‑efficiency turning for non‑ferrous components

The uncoated carbide TH10 grade is designed as a sharp, universal option where low cutting forces and a clean surface are priorities. As an ISO format insert, it gives predictable behaviour when machining aluminium, copper alloys and other non‑ferrous materials; the uncoated cutting edge minimises built‑up edge and reduces friction in soft, gummy workpieces. The result is consistent chip formation and a reliable surface finish while maintaining good tool life under appropriate cutting conditions.

Precision geometry that improves surface finish and reproducibility

With a 0.2 mm corner radius and 60° triangular geometry, this insert balances edge strength and the ability to produce fine finishes. The 11° relief angle reduces rubbing on the flank face, while the 2.38 mm thickness provides stiffness in the clamped assembly. These measurable geometry parameters translate directly into better vibration resistance and stable cutting on short to medium overhangs, helping to achieve repeatable dimensional accuracy and consistent component appearance.

ISO compatibility and secure mounting for production environments

The insert follows the ISO designation TPGW110202, ensuring interchangeability with standard holders when form, relief, tolerance class, clamping and thickness match. The centre hole with cylindrical plus single‑side countersink (40°–60°) allows robust fastening and straightforward orientation in indexable holders, reducing downtime during index changes. Consider the complete system — holder, clamp pad and replacement screws — to preserve seating accuracy and repeatability in serial machining.

Operational advantages and recommended applications

Absent a chipbreaker (no chipbreaker), this insert is best used where free‑flowing chips are acceptable or where secondary operations (such as finishing) demand an uninterrupted cutting edge. Typical uses include external turning and internal boring of non‑ferrous components where low cutting force and surface quality are essential. The carbide grade offers a combination of sharpness and wear resistance that supports productive machining while simplifying process setup for a broad range of soft to medium‑hard non‑ferrous materials.

For reliable turning performance with Tungaloy’s TH10 grade, contact Metav Werkzeuge for ordering and compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6808993
• Manufacturer SKU: TUN6808993
• Model series: ISO turning inserts
• Material: carbide
• Grade/coating: TH10, uncoated
• Shape: triangular

Core numerical data

• Size (inscribed circle): 11 mm
• Thickness: 2.38 mm
• Corner radius: 0.2 mm
• Relief angle: 11°
• Geometry angle: 60°
• Manufacturer article number: 6808993

Special features

• ISO designation: TPGW110202
• With hole and single‑side countersink (40°–60°)
• No chipbreaker
• For turning (external and internal)
• Compatible with ISO holders when form, tolerance and clamping match

FAQ

Which materials is the insert suitable for? The Tungaloy TPGW110202 TH10 insert is intended primarily for non‑ferrous materials such as aluminium and brass, where the uncoated cutting edge supports low cutting forces and reduced built‑up edge.

How is the insert mounted in a toolholder? The insert uses a centre hole with a cylindrical bore and a single‑side countersink (40°–60°); secure clamping with a matching holder, clamp pad and screw ensures correct seating and repeatable orientation for the TPGW110202 geometry.

Does this insert include a chipbreaker? No, the TPGW110202 TH10 comes without a chipbreaker, which is suitable when free‑flowing chips or uninterrupted sharp edges are required for finishing operations.

What effect does the 0.2 mm corner radius have on machining? A 0.2 mm corner radius provides a compromise between edge strength and the ability to produce fine surface finishes; it reduces the risk of edge chipping while keeping contact stresses moderate, helping to improve surface quality on turned parts.

Is the insert compatible with all ISO triangular holders? Compatibility depends on matching the ISO form, relief angle, tolerance class, clamping method, size and thickness; the TPGW110202 follows ISO standards but verification against the specific holder specifications is recommended.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.