WNMG 080408 TH10 Wendeplatten - Tungaloy

Reliable performance with a sharp, uncoated carbide grade and a 0.8 mm corner radius ensures low cutting forces and clean surfaces; the double-sided chipbreaker and ISO geometry support cost‑efficient, repeatable turning operations. Order the insert directly via Metav Werkzeuge or contact our consultants for selection support.

WNMG 080408 TH10 — Trigon turning insert (80°) by Tungaloy

WNMG080408 TH10 is an ISO‑standard trigon indexable insert for external and internal turning, offering a sharp, uncoated grade optimised for non‑ferrous materials and applications where low cutting forces are required

• ISO‑standard indexable geometry
• Sharp uncoated TH10 carbide grade
• 0.8 mm corner radius for fine finish
• Double‑sided chipbreaker, cylindrical hole

Consistent low cutting forces and improved surface quality

The combination of a sharp uncoated carbide edge and the TH10 grade delivers reduced cutting forces and a clean surface on non‑ferrous materials and similar applications. An uncoated cutting edge can lower friction and reduce built‑up edge formation, which translates into steadier cutting conditions and fewer rework cycles. These properties are particularly beneficial where minimal cutting resistance and good surface integrity are decisive performance factors.

Straightforward integration with ISO holders and predictable clamping

Designed to the ISO turning insert standard, the trigon shape and cylindrical hole make mounting straightforward in compatible external holders and boring bars. Compatibility depends on form, clearance angle, tolerance class, fastening and thickness; the 80° included angle and 0° clearance specification support stable seating and reproducible positioning. This predictability simplifies tool setup, reduces changeover time and helps maintain consistent geometry across production runs.

Small radius for finer edge control and dimensional accuracy

The 0.8 mm corner radius provides a balance between edge strength and the ability to generate fine surface finishes. A modest corner radius reduces the tendency to form large burrs and allows for tighter tolerances on turned features. For precision turning tasks where edge control influences repeatability, this geometry helps preserve dimensional accuracy while maintaining acceptable tool life.

Robust part handling thanks to double‑sided geometry and chip control

A double‑sided chipbreaker increases insert usage economy by allowing indexable reuse, while the chipbreaker design supports manageable chip formation in many turning operations. The trigon format and the cylindrical hole ensure central clamping stability; together these features reduce vibration and help secure a reliable cutting edge during both external and internal turning cycles.

Choose the Tungaloy WNMG080408 TH10 through Metav Werkzeuge for consistent, efficient turning performance and contact our technical advisers at Metav Werkzeuge for application guidance

Technical data

• Article number: 6809675
• SKU: 6809675-Tungaloy
• Manufacturer SKU: TUN6809675
• Label: WNMG080408 TH10
• Model series: ISO‑Drehwendeschneidplatten
• Material: carbide

Numbers / Core technical data

• Corner radius: 0.8 mm
• Included angle: 80°
• Clearance angle: 0°
• Plate thickness: 4.76 mm
• ISO code: 080408
• Size designation: 08

Designs / Special features

• Trigon plate form
• Double‑sided chipbreaker
• Cylindrical hole (with hole)
• Uncoated cemented carbide
• Grade TH10
• Intended use: turning (external and internal)
• ISO‑standard insert

FAQ

Which materials are best processed with this insert?
The WNMG080408 TH10 insert uses the TH10 uncoated carbide grade and is intended primarily for non‑ferrous materials and applications where a sharp edge and low cutting forces produce the best surface quality.

What are the key geometric specifications of the insert?
This trigon, 80° insert has a 0.8 mm corner radius, a plate thickness of 4.76 mm and a 0° clearance angle; the ISO designation is 080408 (manufacturer SKU TUN6809675).

Is the cutting edge coated?
No, the WNMG080408 TH10 is an uncoated cemented carbide insert; the uncoated edge supports lower cutting forces and cleaner finishes in suitable applications.

Can the insert be indexed to extend usage?
Yes, the double‑sided chipbreaker geometry allows indexing to the second cutting edge, improving usage economy and reducing tooling costs per edge.

How is compatibility with holders ensured?
Compatibility is determined by insert form, clearance angle, tolerance class, fastening, size and thickness; the ISO‑standard geometry of this trigon insert simplifies selection of a matching external holder or boring bar.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.