WNMG 080412 TH10 Wendeplatten - Tungaloy

Take advantage of precise chip control, low cutting forces and ISO compatibility for reliable turning performance; order the insert directly via Metav Werkzeuge or consult the technical advisers if further specification is required.

WNMG 080412 TH10 trigon turning insert by Tungaloy — uncoated carbide, double‑sided chipbreaker

WNMG 080412 TH10 is a trigon‑shaped, ISO‑standard turning insert designed for external and internal turning in a wide range of non‑ferrous applications and general turning tasks

• ISO‑standard trigon insert
• Uncoated carbide grade TH10
• 1.2 mm corner radius for robust edges
• Double‑sided chipbreaker for extended indexing

Precise machining with a universal uncoated grade

The insert is produced in carbide and graded TH10 to provide a sharp, universal cutting edge that lowers cutting forces and produces clean surface finishes on non‑ferrous materials. The uncoated nature of the grade reduces built‑up edge tendency in softer alloys and helps maintain a predictable edge geometry during interrupted cuts. This results in consistent component quality and reduces the need for excessive finishing operations, improving overall machining efficiency.

Geometry geared to stable turning and repeatable setup

With a trigon form and an included angle of 80°, the geometry favours accessibility in confined work and versatile engagement angles for common turning tasks. The 1.2 mm corner radius supports a balance between edge strength and surface finish, while the 4.76 mm thickness contributes to stable seating in the toolholder. The cylindrical centre hole and the double‑sided chipbreaker enable two indexing positions, increasing tool life per insert and lowering tooling cost per part.

Compatibility and system considerations for fleet standardisation

The insert conforms to ISO specifications, so holder compatibility depends on matching the insert form, clearance geometry, tolerance class, fixing method, size and thickness. When standardising tooling, pairing this insert with a suitable external holder or boring bar and the correct clamp set simplifies logistics and reduces setup variability. The modular system approach enables straightforward replacement of inserts without redesigning the holder setup, supporting a reliable production flow.

Application guidance and process benefits

Designed primarily for turning, the insert suits both external and internal operations where low cutting forces and clean chip formation are priorities. The TH10 grade promotes stable chip control in many non‑ferrous materials and mixed batches, limiting machine downtime for chip management. For customers seeking to optimise cycle times while maintaining surface integrity, the combination of carbide substrate and tailored chipbreaker geometry provides a cost‑effective compromise between productivity and finish quality.

Contact Metav Werkzeuge for an application‑specific recommendation based on the Tungaloy TH10 grade or to request matching holder and clamping options — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930

Technical data

• Manufacturer article number: 6809755
• SKU: 6809755-Tungaloy
• Manufacturer SKU: TUN6809755
• Label: WNMG080412 TH10
• ISO designation: WNMG080412

Facts

• Corner radius: 1.2 mm
• Plate thickness: 4.76 mm
• Included angle: 80°
• Clearance angle: 0°
• Plate size: 08

Special features

• Material: carbide
• Grade: TH10 (uncoated)
• Chipbreaker: double‑sided
• Plate form: trigon
• Centre hole: cylindrical hole
• Typical use: external and internal turning
• System: ISO turning insert, compatible with matching holders and clamp sets

FAQ

What materials is this insert best suited for?
The WNMG 080412 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated TH10 grade supports low cutting forces and clean surface finishes.

How does the double‑sided chipbreaker affect tooling costs?
A double‑sided chipbreaker provides two usable cutting edges per index, extending the service life of each insert and reducing tooling cost per component when used with the correct holder and clamp set.

Which dimensions are critical when selecting a compatible holder?
Holder selection should match the insert form, clearance geometry, tolerance class, fixing method, plate size and thickness; the 4.76 mm thickness and trigon form are particularly important for correct seating.

Can the insert be used for interrupted cuts or harder alloys?
The robust 1.2 mm corner radius and carbide substrate give reasonable resistance to interruption, but the uncoated TH10 grade is primarily intended for non‑ferrous and general turning; for higher hardness materials a dedicated coated grade may be preferable.

Where is the original product manufactured and how is it identified?
The insert is a genuine Tungaloy product identified by manufacturer article number 6809755 and manufacturer SKU TUN6809755, supplied as a new original item by the manufacturer

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.