DPCW 11T3ZF AH740 Wendeplatten - Tungaloy

High-feed performance and process security unite in a compact geometry: PVD-coated AH740 carbide for wear resistance, a rhombic 11 mm profile and a 55° cutting angle deliver productive material removal with small axial depths. Take advantage of the DoFeed family’s design for reliable pocketing and face milling — order via Metav Werkzeuge or consult our specialists for application advice.

DPCW 11T3ZF AH740 DPCW milling insert — Tungaloy (DoFeed series)

The DPCW 11T3ZF AH740 is a rhombic indexable insert engineered for high-feed milling, designed to maximise chip volume removal at low axial engagement for efficient pocketing and face operations.

• High-feed series for large chip volumes
• PVD-coated AH740 for wear resistance
• Rhombic 11 mm insert, 55° cutting angle
• Cylindrical hole with 40°–60° countersink

Increased throughput with reliable cutting performance

The DoFeed family is focused on maximising productive output when small axial depths are combined with high feed per tooth. The rhombic 11 mm geometry and 55° cutting angle enable a shallow axial engagement while maintaining a high chip load per revolution, which translates into shorter cycle times for pocketing and face milling. The AH740 grade, a PVD-coated carbide, combines wear resistance with a sharp cutting edge; this pairing reduces flank wear and supports consistent dimensional results in batch production. The design avoids unnecessary complexity: a simple, robust insert geometry designed for stable chip evacuation and repeatable performance across runs.

Precision geometry that supports process security

Geometry details matter in high-feed strategies. The 11° relief (free) angle and the 3.97 mm plate thickness contribute to a stable cutting edge and resistance to chipping under interrupted cuts. The insert’s cylindrical hole with a single-side countersink (40°–60°) secures accurate clamping and repeatable seating in compatible toolholders. When sharp edge integrity and process security are required together, the combination of the rhombic shape and PVD-coated AH740 substrate reduces the likelihood of unexpected edge failure, supporting uninterrupted production. Technical concepts such as chip formation and edge strength are deliberately balanced to support longer tool life and consistent productivity.

Practical application advice and benefits for the workshop

This insert is specified for milling tasks where high removal rates are needed without deep axial passes — ideal for high-feed roughing, pocketing and face operations. The DoFeed construction is optimised for large time-chip volumes, meaning fewer passes and lower machining time per component. Because the grade emphasises fracture and wear resistance, the insert is particularly suitable for operations that alternate between full and partial engagement. For users less familiar with high-feed kinematics: the strategy relies on increasing feed per tooth while keeping depth of cut small, which reduces spindle load and often raises metal removal rate per minute. For setup recommendations and cutting data, Metav Werkzeuge’s consultants can help select the appropriate holder and programme parameters to match material and machine capabilities.

Choose the Tungaloy AH740 grade for process-secure high-feed milling and contact Metav Werkzeuge for stock verification, cutting data and application consulting at info@metav-werkzeuge.com or +49 2822 7131930.

Technical data

• Article number: 6815316
• Manufacturer SKU: TUN6815316
• SKU: 6815316-Tungaloy
• Model series: DoFeed
• Label: DPCW11T3ZF AH740 Tungaloy-Insert

Facts

• Insert size: 11 mm
• Plate thickness: 3.97 mm
• Cutting angle: 55°
• Relief (free) angle: 11°
• Hole style: cylindrical hole + single-side countersink (40°–60°)

Special features

• Grade: AH740 (PVD-coated carbide)
• Series application: high-feed milling, pocketing and face milling
• Insert shape: rhombic
• Chipbreaker: none

FAQ

What materials is this insert suitable for?
The DPCW 11T3ZF AH740 insert is optimised for general milling tasks where durability and a sharp cutting edge are required; the AH740 grade is a wear- and fracture-resistant PVD-coated carbide suitable for a broad range of steel and alloy applications.

Is the insert compatible with standard high-feed toolholders?
Yes, the rhombic form and the cylindrical hole with countersink ensure secure clamping in conventional high-feed holders that accept DPCW-style inserts.

How does the DoFeed family improve cycle times?
By enabling high feed per tooth at small axial depths, the DoFeed approach increases metal removal per revolution while reducing the number of passes, leading to lower cycle times for pocketing and face milling.

What should be considered when replacing an insert with SKU 6815316-Tungaloy?
Check seating accuracy and clamping torque, ensure the holder matches the 11 mm geometry and 55° cutting angle, and verify cutting parameters to preserve the sharp edge and exploit the AH740 grade’s wear resistance.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.