XCET 310404 TH10 Wendeplatten - Tungaloy

Take advantage of a high‑feed solution that combines efficient material removal, a sharp uncoated cutting edge and robust seating for repeatable runs. The combination of the DoFeed system architecture, the TH10 uncoated cemented carbide grade and the secure hole‑and‑countersink design supports higher throughput and reliable set‑ups — order directly via Metav Werkzeuge or consult our technical advisors for specification support.

XCET 310404 TH10 indexable insert for high‑feed milling (Tungaloy)

XCET 310404 TH10 is a high‑feed indexable insert optimised for milling applications that demand large time‑material removal rates at small axial depths.

• High‑feed design for large material removal rates
• Uncoated cemented carbide grade TH10
• 0.4 mm corner radius for precise control
• Cylindrical hole with countersink for secure clamping

Maximised productivity with minimal axial engagement

The DoFeed family concept is geared towards machining strategies that favour high feed per tooth combined with shallow axial depths. The XCET310404ER TH10 insert delivers this workflow by pairing a geometry optimised for lateral cutting engagement with a sharp, uncoated cemented carbide grade. The result is reduced cutting forces, stable feed behaviour and shorter cycle times when performing pocketing, face milling and high‑feed passes. For process planners, the measurable outcome is a higher material removal rate per tool life interval, achieved without increasing axial immersion.

Consistent surface quality and controlled chip formation

The TH10 grade is specified as an uncoated cemented carbide engineered to preserve a keen cutting edge, which supports a clean surface finish in non‑ferrous and sensitive applications. The insert’s 0.4 mm corner radius offers a compromise between edge strength and profile fidelity, helping to maintain dimensional accuracy on trimmed edges. In addition, the single‑sided chipbreaker promotes predictable chip formation and evacuation, reducing the risk of built‑up edge and enabling consistent results across batch runs.

Practical system integration for dependable production

Designed as part of a coordinated system, the insert’s special form and the cylindrical hole with single‑side countersink (40°–60°) ensure positive seating and repeatable clamping in compatible DoFeed milling bodies. With a thickness of 4.76 mm and a nominal 31 mm size, the component integrates with minimal setup effort, supporting quick index changes and straightforward inventory management. The geometry and fixation concept together contribute to robust process stability and predictable tool‑life performance in industrial milling cells.

Why this solution benefits process engineers

For shops seeking to raise throughput without increasing machine dwell times, the combination of high‑feed geometry, TH10 uncoated carbide and secure clamping addresses core production aims: improved cycle times, repeatable set‑ups and reliable surface quality. The insert is particularly suitable where lower cutting forces and clean finishes are priorities, and where integrating into a DoFeed system yields the best overall return on tooling.

For specification assistance or to order this Tungaloy high‑feed insert for DoFeed milling systems, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6837464
• Manufacturer SKU: TUN6837464
• SKU: 6837464-Tungaloy
• Label: XCET310404ER TH10
• Model series: DoFeed
• Application: Milling
• Material: Cemented carbide

Numbers / Core technical data

• ISO designation: 310404
• Plate size: 31 mm
• Plate thickness: 4.76 mm
• Corner radius: 0.4 mm
• Clearance angle: 7°

Design features

• Uncoated cemented carbide, grade TH10
• One‑sided chipbreaker
• Cylindrical hole + single‑side countersink (40°–60°)
• Special plate form
• For high‑feed milling family (DoFeed)

FAQ

What applications is this insert intended for? The insert is intended for high‑feed milling operations such as pocketing and face milling; the XCET310404ER TH10 is optimised for large time‑material removal at small axial depths.

Which materials work best with the TH10 grade? The uncoated TH10 cemented carbide grade is suitable for non‑ferrous materials and applications where a sharp cutting edge reduces cutting forces and supports a clean surface finish.

How does the clamping design affect repeatability? The cylindrical hole with a single‑side countersink (40°–60°) provides reliable seating and repeatable clamping in compatible DoFeed holders, improving positional accuracy across tool changes.

What is the significance of the 0.4 mm corner radius? A 0.4 mm corner radius balances edge strength and profile accuracy, reducing stress concentration while maintaining satisfactory dimensional control during finishing passes.

Is this insert coated? No, this insert is supplied in an uncoated cemented carbide grade TH10 to preserve a sharp edge that lowers cutting forces and enhances surface quality.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.