PNCU 0905GN TH10 Wendeplatten - Tungaloy

Take advantage of the combination of high material removal rates, low axial depth capability and a robust pentagonal geometry to accelerate milling cycles while maintaining surface quality; order the insert directly via Metav Werkzeuge or consult our technical team for application advice.

PNCU 0905GN TH10 indexable insert, pentagonal 108° – Tungaloy (for milling)

The PNCU 0905GN TH10 is a pentagonal indexable insert engineered for high-feed milling, optimised to deliver large time-chip volumes at small axial depths for pocketing and face milling operations.

• Pentagonal 108° geometry
• TH10 uncoated carbide for non-ferrous
• Central hole with countersink
• Designed for high-feed milling

Boosted material removal with high-feed milling efficiency

The DoFeed family focuses on high-feed milling where productivity depends on maximising volume removal at low axial engagement. The pentagonal shape and the 108° approach angle enable stable cutting with reduced chatter, resulting in consistently higher throughput. By combining large chip volumes with low axial depth, cycle times fall while the machine load remains controllable. This leads to measurable efficiency gains on series work and makes the insert suitable for demanding pocketing and face operations.

Secure clamping and reliable geometry for consistent surfaces

A stable tool‑holder interface is essential for repeatable results. The insert’s pentagonal geometry, central hole with a cylindrical bore and double-sided countersink (40°–60°) ensures secure location and even load distribution. The 0° clearance and the 5.56 mm plate thickness contribute to rigidity under heavy radial loads, reducing deflection and improving surface finish. The double-sided chipbreaker promotes predictable chip formation, which helps maintain machining stability and quality across long production runs.

Low cutting forces and clean finishes with TH10 uncoated carbide

The TH10 grade is an uncoated carbide developed as a sharp universal sort for non-ferrous materials, where a clean cutting edge lowers cutting forces and supports superior surface appearance. For aluminium, brass and softer alloys, the combination of edge sharpness and the insert’s geometry reduces burr formation and minimises built-up edge. The result is reduced rework and improved first-pass quality, while the robust substrate maintains wear resistance over extended use in production environments.

For tailored advice on using the PNCU 0905GN TH10 insert in specific machines or materials, contact Metav Werkzeuge for application support and availability at info@metav-werkzeuge.com or call +49 2822 7131930; Metav Werkzeuge can assist with grade selection and cutting data.

Technical Data

• Article number: 6860117
• Manufacturer SKU: TUN6860117
• SKU: 6860117-Tungaloy

Facts

• Insert size: 09
• Plate thickness: 5.56 mm
• Approach angle: 108°
• Clearance angle: 0°
• Countersink angle: 40°–60°

Special features

• Pentagonal insert form
• Central cylindrical hole with double-sided countersink
• Uncoated carbide (TH10)
• Double-sided chipbreaker
• Model series: DoFeed
• Application: Milling

FAQ

What machining tasks is this insert best suited for?
The insert is designed for high‑feed milling and is particularly suited to pocketing and face milling where large time‑chip volumes at small axial depth are required; the PNCU0905GN TH10 performs well in these tasks.

Is the TH10 grade coated or uncoated and what are the benefits?
The TH10 grade is an uncoated carbide chosen for its sharp edge and low cutting forces, providing clean surface finishes on non‑ferrous materials when using the PNCU0905GN insert.

How does the pentagonal shape affect productivity?
The pentagonal geometry increases indexable edge options and improves stability; combined with the 108° approach angle, it supports higher material removal rates with reduced vibration.

What mounting or clamping features ensure secure use of the insert?
A central cylindrical hole with a double‑sided countersink (40°–60°) provides reliable location and even clamping force, enhancing repeatability and surface quality during milling.

Can this insert be used on aluminium and brass?
Yes; the TH10 uncoated carbide and the insert geometry are well suited to aluminium, brass and similar non‑ferrous alloys, promoting low cutting forces and good surface finish.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.