CCGT 04T102 TH10 Wendeplatten - Tungaloy

Take advantage of a sharp, uncoated carbide cutting edge and precise rhombic geometry to improve surface finish and lower cutting forces in turning operations; order the insert or request holder compatibility advice from Metav Werkzeuge for a reliable production setup.

CCGT 04T102 TH10 – Indexable Turning Insert for Turning (Tungaloy)

A CCGT 04T102 TH10 indexable turning insert engineered for external and internal turning, offering a sharp uncoated cutting edge suited to non‑ferrous materials and applications requiring low cutting forces.

• CCGT 04T102 TH10 uncoated carbide insert
• Rhombic shape with 80° included angle
• 0.2 mm corner radius for fine finishing
• Single-sided chipbreaker, with locating hole

Consistent cutting performance for non‑ferrous machining

The uncoated carbide grade TH10 is a sharp, universal grade optimised for non‑ferrous materials and operations where a clean surface and reduced cutting force are priorities. An uncoated carbide edge produces lower friction at the cutting zone compared with some coated grades, which can translate into improved surface quality and reduced power draw on light machines. For shops processing aluminium, brass or similar alloys, the combination of this grade and the insert’s geometry reduces built‑up edge and supports stable chip flow, helping to maintain part tolerances and minimise secondary finishing. The insert designation is CCGT04T102 TH10, reflecting the ISO format and the cutting grade for straightforward identification.

Precise geometry and ISO compatibility for predictable results

The rhombic plate form with an 80° included angle and a 7° clearance angle produces a versatile cutting geometry that balances strength and accessibility in external and internal turning. The 0.2 mm corner radius helps achieve finer surface finishes while limiting cutting forces during light cuts; larger radii would favour heavier cuts but here the smaller radius supports precision finishing tasks. Plate thickness of 1.59 mm and the standard ISO format ensure predictable seating in compatible holders, while the cylindrical hole with a single‑side countersink (40°–60°) secures repeatable clamping. Where holder compatibility is critical, match form, clearance angle, tolerance class and fixing method to ensure the insert seats correctly and maintains rigidity.

System benefits: chip control, handling and process reliability

A single-sided chipbreaker tailored to this insert promotes effective chip control in the most common turning modes for non‑ferrous alloys, reducing the risk of entanglement and improving cycle times. As part of a complete turning system — insert, outer holder or boring bar, shim/clamp set and replacement screws — the insert supports efficient tool changes and predictable tool life. The design contributes to reduced vibration and consistent surface quality, making it a practical choice for batch production and precision components alike. For selection of the optimal holder and clamping parts, Metav Werkzeuge can advise on the best system configuration to maximise productivity and repeatability.

For specific advice on holder compatibility, recommended cutting parameters and immediate availability of the Tungaloy CCGT04T102 TH10 insert, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — consultants will support the selection of the ideal setup for the application.

Technical data

• Article number: 6862124
• Manufacturer SKU: TUN6862124
• SKU: 6862124-Tungaloy
• Designation: CCGT04T102 TH10 Tungaloy insert
• Model series: ISO turning indexable inserts
• Material: Carbide
• Grade: TH10
• Coating: uncoated

Facts

• Insert size: 04
• Plate thickness: 1.59 mm
• Clearance angle: 7°
• Included angle: 80°
• Corner radius: 0.2 mm

Special features

• Rhombic plate form
• Single-sided chipbreaker
• With hole: cylindrical hole + single countersink (40°–60°)
• Compatible with ISO holders for external and internal turning
• Typical system: insert, outer holder or boring bar, shim/clamp set, replacement screws

FAQ

What materials is this insert suitable for?
The CCGT04T102 TH10 indexable turning insert (Tungaloy) is optimised for non‑ferrous materials such as aluminium and brass, where a sharp uncoated edge and low cutting forces support clean surfaces.

Is the insert coated or uncoated?
This insert is supplied as an uncoated carbide grade TH10; the uncoated edge is chosen to reduce cutting forces and prevent built‑up edge in softer alloys.

How is the insert secured in a holder?
The insert has a cylindrical locating hole with a single‑side countersink (40°–60°) and seats in standard ISO‑format holders; ensure the holder matches form, clearance and thickness for correct clamping of the CCGT04T102 TH10.

What finish can be expected with the 0.2 mm radius?
A 0.2 mm corner radius helps achieve finer surface finishes during finishing passes; the small radius reduces tool pressure and supports dimensional accuracy on turned parts.

Can this insert be used for both external and internal turning?
Yes — the rhombic geometry and ISO compatibility make the insert suitable for both external and internal turning when paired with the appropriate outer holder or boring bar.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.