CCGT 04T102 TH10 Wendeplatten - Tungaloy

Benefit from the combination of a sharp, uncoated carbide TH10 grade and ISO rhombic geometry for reduced cutting forces and reliably clean surfaces; the 0.2 mm corner radius and secure cylindrical hole with single‑side countersink support repeatable clamping and consistent part finish. Order the insert via Metav Werkzeuge or contact our consultants for application-specific recommendations.

CCGT 04T102 TH10 ISO rhombic turning insert by Tungaloy — uncoated carbide, 0.2 mm radius

The CCGT04T102 TH10 is an ISO rhombic turning indexable insert engineered for external and internal turning, especially where low cutting forces and a clean surface are required for non-ferrous and similar materials.

ISO rhombic shape, 80° cutting geometry
Uncoated carbide TH10 for low cutting forces
0.2 mm corner radius for fine surface finish

Reliable cutting with low forces for non‑ferrous turning

The insert’s core advantage is the TH10 uncoated carbide composition, which provides a sharp cutting edge that lowers cutting forces and reduces the tendency for built‑up edge when machining aluminium, brass and comparable materials. The ISO rhombic geometry with an 80° cutting angle and 7° relief angle balances edge strength and accessibility, enabling stable turning even at moderate overhangs. Choosing an uncoated grade supports effortless chip formation and a clean surface without relying on coating chemistry, which is especially useful in operations prioritising low heat input and easy reconditioning.

Predictable surface quality and repeatability

A 0.2 mm corner radius delivers a precise compromise between edge strength and surface finish: enough radius to avoid premature wear in interrupted cuts, yet small enough to produce fine profiles and dimensional accuracy. The one‑sided chipbreaker and the pin‑style clamping with cylindrical hole plus single‑side countersink (40°–60°) ensure reproducible seating and consistent chip control when paired with a suitable holder. For suppliers seeking predictable part quality, this insert narrows process variability and reduces scrap rates through stable engagement with the workpiece.

System compatibility and practical handling advice

As an ISO standard part, compatibility with toolholders depends on form, relief angle, tolerance class, fastening method, size and thickness; this insert’s size 04 and 1.59 mm plate thickness make it suitable for many compact external and internal holders. The system build typically comprises the insert, a matched external holder or boring bar, a backing pad/locating set and the correct clamp and screw. Select the chipbreaker and grade in line with workpiece material and machining stability to gain optimal economy and tool life rather than relying on maximum cutting parameters alone.

For machining enquiries or to request application guidance for the Tungaloy CCGT04T102 TH10 insert, contact Metav Werkzeuge for expert advice and rapid supply from stock

Technical data

• Article number: 6862125
• Manufacturer SKU: TUN6862125
• Seller SKU: 6862125-Tungaloy
• Model series: ISO turning indexable inserts
• Material: carbide

Facts

• Corner radius: 0.2 mm
• Relief angle: 7°
• Cutting geometry: 80°
• Plate thickness: 1.59 mm
• Plate size: 04

Special features

• Grade: TH10 (uncoated)
• Shape: rhombic
• Hole: cylindrical hole with single‑side countersink (40°–60°)
• Chipbreaker: one‑sided
• Application: turning (external and internal)
• System components: insert, holder/boring bar, backing pad, clamp and screw

FAQ

What materials is this insert best suited for?
The Tungaloy CCGT04T102 TH10 insert is optimised for non‑ferrous materials such as aluminium and messings, and for applications where an uncoated, sharp edge delivers low cutting forces and clean surfaces.

How does the 0.2 mm corner radius affect finish and tool life?
A 0.2 mm corner radius on the CCGT04T102 balances surface finish and edge durability: it helps achieve fine surface quality while providing sufficient edge strength for typical turning tasks.

Is the insert compatible with standard ISO turning holders?
Yes—compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness; the ISO designation of this insert supports use in appropriately rated ISO holders when clamped with the correct backing pad and screw.

What is the advantage of an uncoated carbide grade such as TH10?
The TH10 uncoated grade promotes lower cutting forces and reduced built‑up edge during the turning of non‑ferrous materials, simplifying chip control and often improving surface quality without the need for a coating.

Which chipbreaker should be chosen for stable machining?
The insert features a one‑sided chipbreaker; select a chipbreaker and grade combination that matches the workpiece material and the rigidity of the setup to ensure stable chip formation and process security.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.