TPGT 070104 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of reliable cutting performance, precise geometry and simple indexability to maintain consistent production quality. The uncoated TH10 carbide grade reduces cutting forces and delivers clean surface finishes in non‑ferrous turning, while the ISO form and secure hole design ensure repeatable clamping. Order the insert directly via Metav Werkzeuge or ask the consultants for tailored application advice.

TPGT 070104 TH10 indexable turning insert by Tungaloy — triangular ISO insert, 60° included angle

The TPGT 070104 TH10 is an ISO‑standard triangular indexable insert designed for external and internal turning applications where low cutting forces and clean surface finishes are required.

• ISO-standard triangular insert, 60° included angle
• Uncoated TH10 cemented carbide grade
• 0.4 mm corner radius with 11° relief
• Cylindrical hole with one-sided countersink

High productivity through lower cutting forces

The combination of an uncoated carbide edge and the TH10 universal grade results in markedly lower cutting forces, which is particularly advantageous when machining non‑ferrous alloys and delicate components. A reduced force requirement leads to steadier cutting conditions, less vibration and a clean surface finish that shortens downstream processing. Because the grade is uncoated, the cutting edge remains sharp and supports operations where minimal edge buildup and consistent friction behaviour are essential.

Consistent accuracy from designed geometry

A triangular form with a 60° included angle and a 0.4 mm corner radius delivers geometrical stability for repeated indexings. The 11° relief angle reduces rubbing on the flank and helps maintain dimensional accuracy over multiple indexings. The insert’s modest 1.59 mm thickness contributes to a compact seat height while still providing sufficient edge strength for common turning tasks. Together, these characteristics support predictable tool life and repeatable part quality in batch production.

Improved chip control and application flexibility

The single‑sided chipbreaker has been designed to guide chips away from the cut in typical turning operations, improving process reliability and surface integrity. The insert is suitable for a wide range of turning set‑ups when matched with an appropriate holder and clamping system; selection of the chipbreaker and grade should be aligned with the workpiece material, depth of cut and machine stability. The result is efficient swarf evacuation, reduced risk of re‑cutting chips and stable cycle times.

Straightforward integration into ISO tooling systems

Compatibility with a toolholder is governed by the insert’s form, relief angle, tolerance class, fastening type, size and thickness. The cylindrical hole with a one‑sided countersink (40°–60°) enables secure, repeatable clamping in standard ISO seats and helps maintain concentricity during index changes. This standardisation simplifies inventory management and reduces setup time when replacing worn inserts in both external and internal turning operations.

For application recommendations, availability and practical selection support for this Tungaloy insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best insert and holder combination for the intended machining task.

Technical data

• Article number: 6862138

• SKU: 6862138-Tungaloy

• Manufacturer SKU: TUN6862138

• Model series: ISO-Drehwendeschneidplatten

• Name: TPGT070104 TH10 Tungaloy insert

Facts

• Corner radius: 0.4 mm

• Inscribed size: 07

• Included angle: 60°

• Relief angle: 11°

• Thickness: 1.59 mm

Special features

• Carbide grade TH10, uncoated cemented carbide

• Triangular form, ISO‑standard

• Single‑sided chipbreaker

• Cylindrical hole with one‑sided countersink (40°–60°)

• Suitable for external and internal turning

• Compatible with ISO turning holders

FAQ

What materials is this insert best suited for? The TPGT 070104 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated carbide edge supports low cutting forces and clean surface finishes.

How does the insert secure in the toolholder? The insert features a cylindrical hole with a one‑sided countersink that enables reliable clamping in ISO seats when the holder matches form, size and fastening specifications.

Can this insert be used for internal turning as well as external turning? Yes, the triangular ISO form and secure clamping design make this insert suitable for both external and internal turning operations when paired with an appropriate holder.

What benefit does the 0.4 mm corner radius provide? A 0.4 mm corner radius balances edge strength and dimensional control, offering improved surface finish while resisting minor edge chipping in common turning operations.

Is the TH10 grade coated? No, the TH10 grade for this insert is uncoated cemented carbide, chosen to keep the cutting edge sharp and to reduce cutting forces for specific material groups.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.