CCGT 04T101 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of low cutting forces, reliable uncoated carbide performance and precise geometry for consistent turning results; order directly via Metav Werkzeuge or consult our specialists for application advice.

CCGT 04T101 TH10 – Rhombic ISO Turning Insert (0.1 mm radius, 7° relief) – Tungaloy

The CCGT 04T101 TH10 is an ISO-standard rhombic turning insert designed for external and internal turning, optimised for non-ferrous materials and operations requiring low cutting forces and fine surface finishes.

• ISO rhombic turning insert CCGT 04T101 TH10
• Uncoated carbide for low cutting forces
• 0.1 mm corner radius for fine finishes
• Compatible with holders requiring 7° relief

Reliable finishes with low cutting force geometry

The insert’s 0.1 mm corner radius and sharp, uncoated TH10 carbide grade are engineered to produce consistently fine surfaces when machining softer and non-ferrous materials. The small corner radius reduces radial cutting engagement, which lowers cutting forces and vibration; this leads to improved dimensional stability and a more predictable surface texture during both light finishing cuts and routine profile turning. For workshops seeking regular, repeatable finishes, the geometry supports a reduction in rework cycles and enhances process reliability.

Seamless integration into ISO tool systems

As an ISO-standard component, the rhombic-shaped insert features a central hole with a cylindrical bore and a one-sided countersink (40°–60°), which ensures secure fastening in compatible holders. The specified 7° relief angle and a plate thickness of 1.59 mm make the insert suitable for a wide range of standard external holders and boring bars; compatibility is determined by form, relief angle, tolerance class, fastening and size. This predictable fit simplifies tooling logistics and shortens setup times on multi-machine shop floors.

Material suitability and chip control explained

The uncoated TH10 grade is a sharp, universal carbide optimised for non-ferrous materials and applications where a bare cutting edge helps to lower cutting forces and yield cleaner surfaces. The insert includes a single-sided chipbreaker, which promotes controlled chip formation for many turning tasks; this is particularly useful when machining brass, aluminium alloys and similar materials where chip control and surface integrity are priorities. For mixed-production environments, selecting the correct chipbreaker and holder stability will directly influence cycle times and tool life.

Practical benefits for everyday production

Designed as part of the ISO turning insert family, the rhombic CCGT form with a 04 size and the listed dimensional parameters provides a cost-effective option for shops that require predictable interchangeability and consistent part quality. The simplicity of an uncoated carbide edge reduces the tendency for built-up edge on softer alloys, while the standardised form factor helps to keep tooling inventories compact and changeovers rapid. For operations aiming to increase throughput without compromising finish, the combination of geometry and grade delivers measurable gains in process consistency.

For application support or to specify the CCGT 04T101 TH10 for a particular material or holder combination, contact Metav Werkzeuge for tailored advice and immediate availability.

Technical data

• Article number: 6862140
• Manufacturer SKU: TUN6862140
• Our SKU: 6862140-Tungaloy
• Series: ISO turning inserts
• Product designation: CCGT04T101 TH10

Facts

• Corner radius: 0.1 mm
• Plate thickness: 1.59 mm
• Insert size: 04
• Relief angle: 7°
• Included angle: 80°

Special features

• Material: carbide (uncoated)
• Grade: TH10
• Plate form: rhombic
• Chipbreaker: single-sided
• Hole: cylindrical bore with one-sided countersink (40°–60°)
• Application: external and internal turning
• Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness

FAQ

What materials is this insert best suited for?
The CCGT 04T101 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated TH10 carbide grade supports low cutting forces and clean surface finishes.

Can the insert be used for both external and internal turning?
Yes, the ISO rhombic form and secure central fixing (cylindrical hole with countersink) make the insert suitable for both external and internal turning when paired with the correct holder.

How does the 0.1 mm corner radius affect machining?
A 0.1 mm corner radius reduces cutting engagement and vibration, improving surface finish and dimensional control for finishing and light turning passes.

Is a coated grade available for harder materials?
The listed article is an uncoated carbide TH10 grade intended for low‑force applications; for harder materials or heavy roughing, consider a coated grade or different carbide sort—Metav Werkzeuge can advise on alternatives.

What determines compatibility with my toolholder?
Compatibility depends on the insert’s form, 7° relief angle, tolerance class, fastening method, size and thickness; ensure the holder matches these parameters for secure clamping and correct geometry.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.