CCGT 04T101 TH10 Wendeplatten - Tungaloy

The combination of uncoated carbide performance, a 0.1 mm corner radius and ISO compliance delivers low cutting forces and clean surface quality for non-ferrous turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for process recommendations.

CCGT 04T101 TH10 indexable turning insert — rhombic 80° geometry, uncoated carbide, Tungaloy

The CCGT04T101 TH10 is an ISO‑format indexable turning insert designed for general turning; its rhombic, 80° profile and single‑sided chipbreaker suit external and internal turning where low cutting forces and fine finishes are required.

• Uncoated carbide for low cutting forces
• 0.1 mm corner radius for fine finishes
• Rhombic 80° geometry for versatile turning
• Cylindrical hole with 40°–60° countersink

Precise, low‑force machining for non‑ferrous components

The uncoated carbide composition of this indexable insert provides a sharp, robust cutting edge that reduces cutting resistance and supports superior surface integrity when machining non‑ferrous materials. The TH10 grade is formulated for universal use where an uncoated edge promotes low heat build‑up and minimal burr formation. The small 0.1 mm corner radius helps achieve fine surface finishes while maintaining predictable tool life under stable cutting conditions. The single‑sided chipbreaker promotes controlled chip formation, making the insert suitable for both finishing and light medium roughing in suitable materials.

ISO compatibility and secure clamping for consistent results

Produced to ISO dimensions, the insert fits standard ISO turning systems when the holder matches form, clearance angle, tolerance class, fixing method, size and thickness. The rhombic plate shape with an 80° included angle provides access for external and internal profiles while preserving rigidity in the tool seat. The insert is supplied with a cylindrical hole and a one‑side countersink (40°–60°) for reliable clamping and repeatable positioning. Standardised geometry simplifies inventory management and reduces set‑up time, contributing to higher uptime and predictable machining outcomes.

Application guidance and process advantages

Select the single‑sided chipbreaker and TH10 grade when machining aluminium alloys, brass and other non‑ferrous workpieces or when low cutting forces and clean part surfaces are priorities. The uncoated cutting edge minimises built‑up edge in sticky materials and supports fine tolerances in finishing passes. For less rigid setups or heavy roughing, consider a different grade or a reinforced geometry; for finishing and light profiling, the rhombic insert delivers balance between access and stability. For process parameter suggestions and holder matching, the Metav Werkzeuge technical team can provide tailored recommendations to optimise feed, speed and depth of cut.

Request the Tungaloy CCGT04T101 TH10 indexable insert through Metav Werkzeuge for efficient non‑ferrous turning; technical advice and machining recommendations are available from Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930

Technical data

• Article number: 6862141-Tungaloy
• Manufacturer article number: 6862141
• Manufacturer SKU: TUN6862141
• Model series: ISO turning inserts

Facts

• Plate size: 04
• Plate thickness: 1.59 mm
• Corner radius: 0.1 mm
• Clearance angle: 7°
• Included angle: 80°

Special features

• Carbide (uncoated)
• Grade: TH10
• Plate shape: rhombic
• Chipbreaker: single‑sided
• Hole: cylindrical with one‑side countersink (40°–60°)
• Typical application: turning
• Compatibility depends on form, clearance, tolerance, fixing, size and thickness

FAQ

What materials is this insert best suited to?
The CCGT04T101 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated carbide grade TH10 supports low cutting forces and clean surface finishes.

How does the 0.1 mm corner radius influence results?
A 0.1 mm corner radius improves surface finish and reduces edge pressure during finishing passes; the small radius is effective for precise profiling with the rhombic 80° geometry.

Is the insert compatible with standard ISO holders?
Yes — the insert follows ISO dimensions; compatibility requires matching holder form, clearance angle, tolerance class, fixing method, size and thickness for secure clamping.

What is the purpose of the cylindrical hole with countersink?
The cylindrical hole plus one‑side countersink (40°–60°) ensures repeatable seating and reliable clamping force in standard indexable turning toolholders.

Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.