TPGT 070104 TH10 Wendeplatten - Tungaloy

Take advantage of the combination of a sharp TH10 uncoated carbide grade, precise ISO geometry and a low corner radius for reliable turning performance; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application guidance.

TPGT 070104 TH10 Tungaloy turning insert — triangular ISO insert for precision turning

The TPGT070104 TH10 is a triangular ISO turning insert designed for external and internal turning, offering a sharp universal grade for non-ferrous materials and operations that require low cutting forces and a clean surface finish.

• Sharp universal grade TH10 for non-ferrous
• Triangular ISO insert, size 07, 0.4 mm radius
• 11° relief angle for secure seating
• Cylindrical hole with single-side countersink

Increased process efficiency with a sharp uncoated grade

The combination of the TH10 specification and uncoated carbide substrate provides a low-friction cutting edge that reduces cutting forces and heat generation. This leads to more stable machining when turning softer, non-ferrous metals and certain alloys. As a result, cycle times can be shortened through higher feed rates or reduced tool pressure, while maintaining a clean surface that lowers the need for secondary finishing. The sharp geometry also helps to preserve component tolerances during high-precision production runs.

Secure clamping and reliable seating reduce setup risk

The insert’s 11° relief angle and ISO-compliant form ensure predictable seating in standard holders; the cylindrical hole with a single-side countersink (40°–60°) provides positive location and a consistent clamp point. Translating these features into shop-floor terms: the insert seats securely, vibration is minimised and repeatability between indexings is improved. The ISO standardisation simplifies holder selection and reduces downtime from searching for compatible parts, supporting a steady production flow and straightforward tool management.

Controlled chip formation and better surface quality

Equipped with a one-sided chipbreaker, the insert is tuned to direct chips away from the cutting area, which enhances operator safety and reduces the risk of surface damage. Effective chip control, together with the low cutting forces of the grade, promotes consistent part finish and dimensional stability. For applications where surface integrity matters—such as visible components or precision bores—this combination reduces scrap rates and increases first-pass yield.

Compact geometry for versatile turning tasks

The triangular insert in size 07 with a 0.4 mm radius and a plate thickness of 1.59 mm offers a balance between edge strength and fine-detail capability. The modest corner radius supports fine finishing passes and contour work, while the triangular form provides multiple indexable edges for economical use. Suitable for both external and internal turning operations, the geometry is particularly useful where small radii and accurate edge location are required; the ISO format also aids rapid integration into existing tool systems.

Contact Metav Werkzeuge today for application advice and to secure genuine Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

• Article number: 6862149
• Manufacturer SKU: TUN6862149
• SKU: 6862149-Tungaloy
• Manufacturer: Tungaloy

Facts

• Size: 07
• Corner radius: 0.4 mm
• Thickness: 1.59 mm
• Relief angle: 11°
• Included angle: 60°
• Hole/countersink: cylindrical hole + single-side countersink (40°–60°)

Special features

• Grade/coating: TH10, uncoated carbide
• Plate shape: triangular ISO insert
• Chipbreaker: one-sided
• Typical application: external and internal turning
• Model series: ISO turning indexable inserts
• Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness

FAQ

What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non-ferrous materials and applications where a sharp cutting edge and low cutting forces support a clean surface finish; use the insert for aluminium, brass and similar alloys.

How does the insert secure in the holder? The triangular ISO form with an 11° relief angle and a cylindrical hole plus single-side countersink (40°–60°) ensures positive location and consistent clamping when matched with the corresponding ISO holder.

Can this insert be used for finishing work? Yes. The 0.4 mm radius and sharp geometry are suitable for fine finishing passes that demand good surface quality and tight dimensional control.

How many indexable edges are available on the insert? The triangular geometry provides multiple usable corners; indexing the insert allows economical use of each edge before replacement.

Is the insert compatible with standard ISO turning systems? The insert follows ISO dimensions for triangular plates; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness, so confirm holder specifications before fitting.

Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.